Zobrazeno 1 - 10
of 48
pro vyhledávání: '"Mohammad Salim Kaiser"'
Publikováno v:
Acta Polytechnica, Vol 64, Iss 4 (2024)
The efficiency of an engine material is closely correlated with its surface area. In order to investigate wear properties, effect of surface contact area as well as silicon addition at the eutectic level of Al-Cu-Mg alloy has been studied. This test
Externí odkaz:
https://doaj.org/article/43bd2b0fdddb4f6eb7b42dc33db19b7f
Publikováno v:
Journal of Mechanical Engineering Science and Technology, Vol 6, Iss 2, Pp 95-106 (2022)
A thorough investigation has been carried out on the Al-12Si-1Mg-1Cu-1Ni automotive alloy considering different properties, specially mechanical properties associated with true stress and true strain with Zr addition of trace amount. A commercially a
Externí odkaz:
https://doaj.org/article/fb21b3ef268e4cf9957c72d9000d7827
Publikováno v:
Journal of Mechanical Engineering Science and Technology, Vol 6, Iss 1, Pp 9-22 (2022)
Effect of the elements Fe, Ni, and Cr on the surface quality under machining of hyper-eutectic aluminium-based Al-Si automotive alloys has been carried out as the elements improve the properties of this alloy. Machining is done on a horizontal type m
Externí odkaz:
https://doaj.org/article/6651a6f1f9874b77bbce5b1343b0c975
Autor:
Mohammad Salim KAISER
Publikováno v:
Journal of Materials and Engineering Structures, Vol 8, Iss 2, Pp 241-251 (2021)
Aluminum alloys always content the element iron more or less as a common impurity. It is unavoidable and has undesirable effects to ductility and cast ability, mainly in cast Al-Si alloys. The quantity of Fe content as well has a significant effect o
Externí odkaz:
https://doaj.org/article/b38dab88235b4f34b5ff7e26db05df52
Publikováno v:
Journal of Mechanical Engineering Science and Technology, Vol 5, Iss 1, Pp 1-16 (2021)
The electrochemical corrosion property of ternary Al and quaternary Zr added Bell metal in 0.1M Sodium Chloride solution has been experimentally conducted at room temperature. Electrochemical impedance spectroscopy (EIS) method and Potentiodynamic po
Externí odkaz:
https://doaj.org/article/03f3630875a848f8a0e06d97b845fe12
Autor:
Samiul Kaiser, Mohammad Salim Kaiser
Publikováno v:
Journal of Engineering Science, Vol 12, Iss 2, Pp 103-108 (2021)
The heating effect on the stability and visual colour of enamel paint on cement plaster is evaluated through light intensity ratio of three primary colours (RGB). The painted cement plaster is isochronally heated in an electric resistance furnace at
Externí odkaz:
https://doaj.org/article/c9fbc3a1e8e342369e7a6a5a3e9e0896
Publikováno v:
Journal of Electrochemical Science and Engineering, Vol 12, Iss 3 (2022)
The aim of this study is to investigate the electrochemical corrosion behavior of Al-Si automotive alloys with different levels of Si doping in 0.1 M NaCl solution at room temperature. The study was performed by electrochemical method, using potentio
Externí odkaz:
https://doaj.org/article/3f1b977e50b2448bb2b8f08a134dba10
Autor:
Mohammad Salim Kaiser
Publikováno v:
JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering), Vol 5, Iss 2, Pp 37-46 (2020)
This manuscript reports the effects of trace impurities on the fractional recrystallization behavior of commercially pure aluminum. To allow the recrystallization cold rolled by 75% alloy samples are annealed isothermally at 700ºK for different time
Externí odkaz:
https://doaj.org/article/d983012fc0224dc8b7da373eb403c914
Autor:
Samiul Kaiser, Mohammad Salim Kaiser
Publikováno v:
Journal of Mechanical Engineering Science and Technology, Vol 4, Iss 1, Pp 1-13 (2020)
The physical behavior of thermally affected cast copper, aluminium bronze and brass has been studied by subjecting to heating isochronally for one hour at a range of 600°C. It shows that solid-solution hardening takes place into the Al added bronze
Externí odkaz:
https://doaj.org/article/9fe98cae70fd4015bd45e46390ed5e58
Autor:
Samiul Kaiser, Mohammad Salim Kaiser
Publikováno v:
Journal of Electrochemical Science and Engineering, Vol 10, Iss 4, Pp 373-384 (2020)
Chemical and physical behavior including corrosion performance, thermal conductivity and visual color change of the copper-based alloys brass and bronze have been studied prior and after corrosion in acidic, alkaline and saline media. The concentrati
Externí odkaz:
https://doaj.org/article/e4f847cf615b4fc8ac31cb7dd91f1fed