Zobrazeno 1 - 10
of 19
pro vyhledávání: '"Mohammad Aberoumand"'
Autor:
Kianoosh Soltanmohammadi, Mohammad Aberoumand, Davood Rahmatabadi, Elyas Soleyman, Sogol Ghasemi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
Publikováno v:
eXPRESS Polymer Letters, Vol 17, Iss 11, Pp 1082-1095 (2023)
There are a limited number of thermoplastics with intrinsic shape memory effect (SME) that are four-dimensional (4D) printable. Development of other shape memory polymers (SMPs) entails synthesis with a complicated chemical experimental lab effort. I
Externí odkaz:
https://doaj.org/article/313240790b7b4c65967599690d0ad31d
Publikováno v:
Polymers, Vol 16, Iss 17, p 2439 (2024)
Enhancing interfacial adhesion in polypropylene (PP)/recycled polyethylene terephthalate (rPET) blends is crucial for the effective mechanical recycling of these commercial plastic wastes. This study investigates the reactive extrusion of PP/rPET ble
Externí odkaz:
https://doaj.org/article/18025ba6a5f74e0dadcec8930f3b0936
Autor:
Davood Rahmatabadi, Mohammad Aberoumand, Kianoosh Soltanmohammadi, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
Publikováno v:
Macromolecular Materials and Engineering, Vol 308, Iss 10, Pp n/a-n/a (2023)
Abstract In this article, a first of its kind blend of polyvinyl chloride (PVC) and biocompatible polycaprolactone (PCL) is introduced by melt mixing and then 3D printed successfully via Fused Filament Fabrication (FFF). Experimental tests are carrie
Externí odkaz:
https://doaj.org/article/45828bbaf5eb404fa79124f8be7ff869
Autor:
Mohammad Aberoumand, Kianoosh Soltanmohammadi, Davood Rahmatabadi, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
Publikováno v:
Macromolecular Materials and Engineering, Vol 308, Iss 7, Pp n/a-n/a (2023)
Abstract In this research, polyvinyl chloride (PVC) with excellent shape‐memory effects is 4D printed via fused deposition modeling (FDM) technology. An experimental procedure for successful 3D printing of lab‐made filament from PVC granules is i
Externí odkaz:
https://doaj.org/article/c6a71cc4fe3d4bf5a9d26f242d8fa9ce
Autor:
Davood Rahmatabadi, Kianoosh Soltanmohammadi, Mohammad Aberoumand, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
Publikováno v:
Macromolecular Materials and Engineering, Vol 308, Iss 5, Pp n/a-n/a (2023)
Abstract Unmodified polyvinyl chloride (PVC) has low thermal stability and high hardness. Therefore, using plasticizers as well as thermal stabilizers is inevitable, while it causes serious environmental and health issues. In this work, for the first
Externí odkaz:
https://doaj.org/article/00df366dba8e44a9a2bbd5bdc73b8adf
Autor:
Mohammad Aberoumand, Kianoosh Soltanmohammadi, Elyas Soleyman, Davood Rahmatabadi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
Publikováno v:
Journal of Materials Research and Technology, Vol 18, Iss , Pp 2552-2569 (2022)
In this work, for the first time, PET-G commercial filament is employed for 4D printing of novel tailormade self-morphing samples. PET-G was found to be an amorphous shape memory polymer (SMP) with net points of tight-knitted physical entanglements d
Externí odkaz:
https://doaj.org/article/3c761907d56f43ccadfc858b3293c550
Autor:
Davood Rahmatabadi, Mohammad Aberoumand, Kianoosh Soltanmohammadi, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Ali Zolfagharian, Mahdi Bodaghi, Mostafa Baghani
Publikováno v:
Polymers, Vol 14, Iss 24, p 5446 (2022)
In this study, a new strategy and design for achieving a shape memory effect (SME) and 4D printed two-layer composite structures is unveiled, thanks to fused deposition modeling (FDM) biomaterial printing of commercial filaments, which do not have an
Externí odkaz:
https://doaj.org/article/0512a95fb26242d2a2833779663a9656
Publikováno v:
Materials, Vol 14, Iss 4, p 908 (2021)
In this study, dissimilar sheets including AA3003 aluminum and A441 AISI steel were welded via cooling-assisted friction stir welding (FSW). Three different cooling mediums including forced CO2, forced water, and forced air were employed, and a non-c
Externí odkaz:
https://doaj.org/article/2ee8edd8f0af4361ac0f1ca664017e4b
Autor:
Davood Rahmatabadi, Kianoosh Soltanmohammadi, Mohammad Aberoumand, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
Publikováno v:
Macromolecular Materials and Engineering. 308
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::27d03700a805243e6d41565c83f09ec1
https://doi.org/10.1002/mame.202200568
https://doi.org/10.1002/mame.202200568
Publikováno v:
Materials Forming, Machining and Tribology ISBN: 9783030680237
Coventry University
Coventry University
According to the fact that the FDM process has several input parameters that should be optimized toward a zero-defect manufacturing production. In this chapter, at first statistical analysis and mathematical methods used in the design of the experime
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::909300b168c746856dde91346de294f9
https://doi.org/10.1007/978-3-030-68024-4_25
https://doi.org/10.1007/978-3-030-68024-4_25
