Zobrazeno 1 - 8
of 8
pro vyhledávání: '"Miroslav Janoš"'
Publikováno v:
MM Science Journal. 2017:1995-2003
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cd14e8cdbd0c67ebfd91636aebff623c
https://doi.org/10.17973/mmsj.2017_12_201760
https://doi.org/10.17973/mmsj.2017_12_201760
Autor:
Miroslav Janoš, Ivan Mrkvica
Publikováno v:
Key Engineering Materials. 581:26-31
This article focuses on the analysis of tool wear mechanisms in milling of Inconel 718. Inconel 718 is tough and highly temperature resistive material, which is used due to its excellent properties especially in aggressive corrosive medium. Machining
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0bba7a88b69bc58869e46d163d819515
https://doi.org/10.4028/www.scientific.net/kem.581.26
https://doi.org/10.4028/www.scientific.net/kem.581.26
Publikováno v:
Advanced Materials Research. :1689-1692
This article deals with influence of the milling cutter tool’s geometry on tension in surface layer of workpiece. It describes, whether the tool brings the residual stress into the surface and its measurement by the magnetoelastic method based on t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::94b242a3dc6c6ba97f46c14707525eb1
https://doi.org/10.4028/www.scientific.net/amr.602-604.1689
https://doi.org/10.4028/www.scientific.net/amr.602-604.1689
Publikováno v:
Manufacturing Technology. 12:178-186
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::719dae2de7c10539814f625da7436453
https://doi.org/10.21062/ujep/x.2012/a/1213-2489/mt/12/2/178
https://doi.org/10.21062/ujep/x.2012/a/1213-2489/mt/12/2/178
Publikováno v:
Applied Mechanics and Materials. :2056-2059
This article deals with milling possibilities of nickel superalloy - Inconel 718. The different cemented carbides were applied for cutting process. These inserts were produced by Pramet Tools Ltd. company. This paper discusses durability of cutting i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::76ff253d944eebc31ffcf87df564dc4f
https://doi.org/10.4028/www.scientific.net/amm.217-219.2056
https://doi.org/10.4028/www.scientific.net/amm.217-219.2056
Publikováno v:
Advanced Materials Research. :1327-1331
Development of cutting tools is basic condition for rationalization of process cutting because it goes out from need of processing new constructional materials. From view of tool it takes application progressive cutting materials. Cutting tools so re
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ea0cde9ade0dac77eacf3e6bff36ec11
https://doi.org/10.4028/www.scientific.net/amr.538-541.1327
https://doi.org/10.4028/www.scientific.net/amr.538-541.1327
Autor:
Miroslav Janoš, Ivan Mrkvica
Publikováno v:
Technological Engineering. 10:9-11
In this document I am describing milling possibilities of nickel alloy Inconel 718. In the beginning is described use of nickel alloys in industry and division of nickel alloys. Further is described nickel alloy what I used - Inconel 718, on this mat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::740cd4671966f754b16a4d0d054c4437
https://doi.org/10.2478/teen-2013-0003
https://doi.org/10.2478/teen-2013-0003
Autor:
Miroslav JANOŠEK
Publikováno v:
Transport Problems, Vol 6, Iss 3, Pp 129-134 (2011)
The article analyses remarkable changes in activities of the transport airbase in terms of substitution of obsolete aircraft by modern transport airplanes. Further, differences between transport airbase’s aircraft and Czech Airlines’ airplanes ar
Externí odkaz:
https://doaj.org/article/2fc9686debf140569c25795dc398e6db