Zobrazeno 1 - 10
of 63
pro vyhledávání: '"Mirko Komatina"'
Publikováno v:
Materials, Vol 17, Iss 17, p 4228 (2024)
Latent heat is commonly measured using Differential Thermal Analysis (DTA) or Differential Scanning Calorimetry (DSC) or calculated using software packages (Thermo-Calc). In this study, the DSC method was used to comprehensively evaluate the accuracy
Externí odkaz:
https://doaj.org/article/5a8d321444474ab7a655613a33c30e32
Autor:
Veljko Savić, Vladimir Topalović, Jelena Nikolić, Sanja Jevtić, Nebojša Manić, Mirko Komatina, Srđan Matijašević, Snežana Grujić
Publikováno v:
Heliyon, Vol 9, Iss 7, Pp e17664- (2023)
Great waste production alongside limited natural resources represents huge environmental and economic problems worldwide. Sustainable waste management and industrial production can reduce pollution and gain some economic benefits. Eco-friendly therma
Externí odkaz:
https://doaj.org/article/92d5997e7c774216b4fd209616fbf7ff
Publikováno v:
Croatian Journal of Forest Engineering, Vol 37, Iss 2, Pp 375-390 (2016)
This paper aims to highlight the advantages of using »Life Cycle Assessment« (or LCA) tool in energy sector for rational energy consumption, selection of »green« technologies and process optimization. Besides the definition and description of bas
Externí odkaz:
https://doaj.org/article/199d9686ea3b482a9efcaf26f1be7821
Publikováno v:
Forests, Vol 9, Iss 10, p 654 (2018)
This paper investigates the environmental impacts and energy benefits of the cultivation of Miscanthus (Miscanthus × giganteus Greef et Deu.), in order to initiate its use in sustainable household heating in the Republic of Serbia. Based on the anal
Externí odkaz:
https://doaj.org/article/ec536b57c9a540f5896e7cfa1d3a21bf
Properties and efficiency of a Pt/Al2O3 catalyst applied in a solid fuel thermo-accumulating furnace
Autor:
SRDJAN BELOSEVIC, RASTKO MLADENOVIC, DRAGOLJUB DAKIC, MILIJANA PAPRIKA, ALEKSANDAR ERIC, DEJAN DJUROVIC, MIRKO KOMATINA, BOSKO GRBIC, NENAD RADIC
Publikováno v:
Journal of the Serbian Chemical Society, Vol 72, Iss 8-9, Pp 869-878 (2007)
A prototype of a solid fuel thermo-accumulating furnace has been developed. In order to achieve a higher combustion efficiency, a Pt/Al2O3 catalyst in the form of 3 ± 0.3 mm spheres was applied, which enabled further combustion of flue gases within
Externí odkaz:
https://doaj.org/article/b1bc6e1b85794cc49d295856bdb1e61e
Publikováno v:
Industrija. 50:21-30
This study represents the first phase of research into the relationship between indoor air quality and the architectural and thermotechnical characteristics of buildings. The focus is on specific categories of users such as the elderly. The research
Autor:
V Zoran Golubovic, S Mirko Komatina, S Nenko Brkljac, R Ivica Camagic, M Aleksandar Micovic, S Zivce Sarkocevic
Publikováno v:
Thermal Science, Vol 25, Iss 6 Part A, Pp 4359-4370 (2021)
The paper presents the integrated application of two methods during testing HVAC system efficiency in the cabins of HUMMER ?1151A1 and OAR 1RL-128D off-road vehicles. Spatial measurements of change in air temperature per time have been performed at t
Publikováno v:
Renewable Energy
Two most common systems of forest biomass supply chains in Serbia are evaluated by using the Life Cycle Assessment (LCA) approach: ‘cut-to-length’ system with penduculate oak (CLO) on flat terrains with a tractor equipage, and ‘tree-length’ s
Publikováno v:
Journal of the Energy Institute
The paper presents results of experimental investigation performed in order to examine kinetics of loose biomass combustion in vertical tube reactor. The investigation conducted included continuous measurement of the fuel mass loss rate, with two bio
Publikováno v:
Thermal Science, Vol 23, Iss Suppl. 5, Pp 1499-1510 (2019)
Thermal Science
Thermal Science
This paper presents numerical and experimental investigations of complex and interrelated physical and chemical phenomena that occur during combustion of baled soybean residue in the furnace with the cigarette type of combustion. The result of compre