Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Mingliang Xing"'
Publikováno v:
Materials, Vol 17, Iss 12, p 2869 (2024)
High-viscosity modified asphalt binder (HVMA) is used widely as a polymer-modified binder in porous asphalt pavement because it can improve the cohesiveness of the asphalt mixture. However, because of the high voidage in the mixture, HVMA is vulnerab
Externí odkaz:
https://doaj.org/article/55fb1005995f42efbff4b75ac35fd5ba
Publikováno v:
Materials and Structures. 55
Publikováno v:
Construction and Building Materials. 225:649-660
Micromechanical models have been used since the 1990s to predict the properties of asphalt mastic. However, most of these models are found to be unsatisfactory in predicting the mastic’s properties because the models were derived from the research
Publikováno v:
Construction and Building Materials. 200:559-569
This paper presents the results of a study that used the constant shear strain test to characterize the strain rate dependence of asphalt mastic’ shear stress. A set of shear strain-stress tests was conducted using the dynamic shear rheometer of th
Publikováno v:
Journal of Materials in Civil Engineering. 32
Highfriction surface treatment (HFST) has been widely utilized by state departments of transportation (DOTs) to reduce friction related vehicle crashes. However, although many studies have ...
Publikováno v:
Journal of Materials in Civil Engineering. 31
Creep properties of asphalt binder and mastic are critically important to asphalt concrete’s high-temperature antirutting resistance. The Burgers and three element models were applied to de...
Publikováno v:
Cold Regions Science and Technology. 129:104-113
Based on the theoretical analysis and experimental study, this paper summarized and compared the frequently-used antifreeze asphalt mixtures (AFACs) design methods, i.e. mass displacement, volume displacement, and combined optimum design method. The
Publikováno v:
Construction and Building Materials. 227:116659
Four asphalt and one filler were selected to fabricate mastics with four filler volume fractions. Amplitude sweeps were carried out to determine the linear viscoelastic (LVE) strain limits, and frequency sweeps were applied to obtain the complex shea
Publikováno v:
Cold Regions Science and Technology. 114:9-14
This research reports the low temperature properties and salt releasing characteristics of antifreeze asphalt concrete (AFAC) under different moisture conditions, such as static condition (wetting–drying cycles), static loading and dynamic loading
Publikováno v:
Construction and Building Materials. 51:133-140
This paper focused on the properties of asphalt mixtures containing anti-freeze filler (ICB-1, ICB-2, ICB-3 and ICB-4) with the volume replacement method. And the void content, high- and low-temperature properties and the susceptibility to moisture d