Zobrazeno 1 - 10
of 20
pro vyhledávání: '"Miloslav Kopecký"'
Publikováno v:
Acta Polytechnica CTU Proceedings, Vol 45 (2023)
The route of the D1 highway in the Lietavská Lúčka - Dubná Skala section near Žilina is taken forward by a 17 m deep cut in a section about 300 m long. The first proposed solution of the highway route was based on the assumption that it is a sta
Externí odkaz:
https://doaj.org/article/dfd5768a0e184a1e9081df2271096d42
Autor:
Miloslav Kopecký, Martin Brček, Jana Frankovská, Martin Ondrášik, Marek Fraštia, Pavel Liščák, Jan Novotný
Publikováno v:
Acta Polytechnica CTU Proceedings, Vol 29, Pp 11-15 (2021)
During the spring of 2013, a relatively large rockslide with a total area of 96,952 m2 occurred in the eastern part of the Malá Fatra mountains. The anticipated depth of the slip surfaces was from 30 to 40 metres and the volume of moving mass was es
Externí odkaz:
https://doaj.org/article/9dee30630fd8425c97699b66f990e52d
Publikováno v:
Acta Polytechnica CTU Proceedings, Vol 16, Iss 0, Pp 25-31 (2018)
The Carpathian flysch is widely recognized as a geological environment prone to slope movements. This fragility in such an environment is due to its complicated geological and hydrogeological conditions. Weakened slip surfaces (developed in clay like
Externí odkaz:
https://doaj.org/article/db2db542ddf94b87837a5433d696dfd7
Publikováno v:
Journal of Sustainable Mining, Vol 13, Iss 4, Pp 12-16 (2014)
Purpose: The complex monitoring of rock slides with the size of 16 ha in order to predict the development of other slides and prevent possible human and material losses. Methods: Precise geodetic point measurement, terrestrial laser and image scannin
Externí odkaz:
https://doaj.org/article/8ac2c102fe6e48d3862ce31614ec3c55
Publikováno v:
Acta Polytechnica CTU Proceedings, Vol 16, Iss 0, Pp 25-31 (2018)
The Carpathian flysch is widely recognized as a geological environment prone to slope movements. This fragility in such an environment is due to its complicated geological and hydrogeological conditions. Weakened slip surfaces (developed in clay like
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 960:022066
As part of the railway tracks modernization in Slovakia, a cut with a maximum depth of approximately 11 meters and a length of approximately 200 meters was built in the vicinity of the capital Bratislava. During the realization of the cut, in complic
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 960:022067
In the field of civil engineering, traditional deformation sensors are used (measurements of changes of length and widths in the stressed material), such as an electrical resistance strain gauge, deviation meters (mechanical dial gauge, electronic di
Publikováno v:
Springer Series in Geomechanics and Geoengineering ISBN: 9783319996691
Porosity is a very important rock property because it controls many other rock properties. However, not only the total or open porosity but also the rock pore structure (RPS) is important because of its relation to some rock properties. The RPS inclu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8f5e7062c52689145b68a196939768f0
https://doi.org/10.1007/978-3-319-99670-7_38
https://doi.org/10.1007/978-3-319-99670-7_38
Publikováno v:
Procedia Earth and Planetary Science. 2015, vol. 15, p. 309-314.
This article is dealing with stability of the highway cut in Eastern Slovakia. The cut is situated in rock environment of the Carpathian flysch, which in area of the cut mostly consists of shale with different degree of weathering. The cut is support
Autor:
Martin Ondrášik, Miloslav Kopecký
Publikováno v:
Studia Geotechnica et Mechanica, Vol 36, Iss 1, Pp 79-88 (2014)
Crashed or dimensional rocks have been used as natural construction material, decoration stone or as material for artistic sculptures. Especially old historical towns not only in Slovakia have had experiences with use of stones for construction purpo