Zobrazeno 1 - 10
of 43
pro vyhledávání: '"Milan Dvořák"'
Autor:
Milan Dvořák, Tomáš Ponížil, Viktor Kulíšek, Nikola Schmidová, Karel Doubrava, Bohumil Kropík, Milan Růžička
Publikováno v:
Applied Sciences, Vol 12, Iss 16, p 8377 (2022)
This article focuses on the development of a carbon composite bicycle frame using various experimental methods of structural analysis. Two types of frame specimen were used. The complete frame specimen was tested in accordance with ISO test load case
Externí odkaz:
https://doaj.org/article/f9e69fab064d4017bfb8c1f169d58d44
Publikováno v:
Transactions of the VŠB-Technical University of Ostrava, Mechanical Series, Vol 59, Iss 1, Pp 55-58 (2013)
Presented paper deals with comparison of two measurements done in our lab to achieve the value of the springback angle of composite plate with single curvature. Plate consists of carbon fiber and PPS matrix. Springback angle without recrystallization
Externí odkaz:
https://doaj.org/article/ed8ad70b8343474aa6f6a771a7894606
Publikováno v:
Czech Journal of Food Sciences, Vol 28, Iss 6, Pp 485-494 (2010)
We investigated the effect of caseinomacropeptide concentrate (CMP) on the growth and metabolic activity of Bifidobacterium bifidum CCDM 94 and Bifidobacterium lactis BB12 in skim milk with the addition of glucose and of various combinations of yeast
Externí odkaz:
https://doaj.org/article/bebf69dccc3b409da7dc5b166f9f6641
Autor:
Nikola Schmidová, Tomáš Ponížil, Bohumil Kropík, David Blaha, Zuzana Tatíčková, Milan Dvořák, Karel Doubrava, Milan Růžička
Publikováno v:
Procedia Structural Integrity. 42:1306-1313
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::11be63562472438dafc4c65fee124b71
https://doi.org/10.1016/j.prostr.2022.12.166
https://doi.org/10.1016/j.prostr.2022.12.166
Publikováno v:
Procedia Structural Integrity. 17:726-733
Recently, there has been an increased interest in structural health monitoring (SHM) of building and transport structures. Standard strain gauges placed on a beam surface are mostly used to monitor the mechanical stresses of timber or concrete struct
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b24297308aa38e49bac21e717fd31e69
https://doi.org/10.1016/j.prostr.2019.08.097
https://doi.org/10.1016/j.prostr.2019.08.097
Autor:
Tomáš Kostroun, Milan Dvořák
Publikováno v:
Materials
Volume 14
Issue 3
Materials, Vol 14, Iss 533, p 533 (2021)
Volume 14
Issue 3
Materials, Vol 14, Iss 533, p 533 (2021)
In this article, we examine the possibility of using active infrared thermography as a nontraditional, nondestructive evaluation method (NDE) for the testing of adhesive joints. Attention was focused on the load-bearing wing structure and related str
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::01919cb7e21e2b54d80630d28d473577
http://europepmc.org/articles/PMC7865574
http://europepmc.org/articles/PMC7865574
Publikováno v:
13th Research and Education in Aircraft Design: Conference proceedings. s. 7-14. ISBN 978-80-214-5696-9
Bird or hail stone strikes are an important phenomenon which must be considered during aircraft design. Most of major bird or hail strike incidents result from engine ingestion. As engines are the sole thrust providing mechanisms of an aircraft, it i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::0cbafa8252694d290aa9dfac12a198ca
https://doi.org/10.13164/conf.read.2018.1
https://doi.org/10.13164/conf.read.2018.1
Publikováno v:
Scopus-Elsevier
Delamination detection on carbon fiber reinforced thermoplastic composites was investigated by application of the electrical resistance change method. Experimental data are compared to those obtained during delamination growth on carbon fiber reinfor
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a37161a84c410669e02e7fa17c4ab805
http://hdl.handle.net/11025/35385
http://hdl.handle.net/11025/35385
Publikováno v:
Applied Mechanics and Materials. 827:344-347
The paper deals with the experimental analysis focused on the determination of strain in wooden building structures using optical fibers with FBG sensors. Firstly, optical fibers were used to measure displacements of layers and surface strain of the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4b9c65dd3349b09105ab588b6e48564f
https://doi.org/10.4028/www.scientific.net/amm.827.344
https://doi.org/10.4028/www.scientific.net/amm.827.344
Autor:
Milan Dvořák, Emil Schwarzer
Publikováno v:
Journal of Surface Engineered Materials and Advanced Technology. 2016, vol. 6, issue 3, p. 118-124.
The article used new experimental equipment for effective testing of adhesion coatings on the sheets. Testing was performed in jig by bending roller with selected radius. In the context of experiments a multi-jet system was used. The aim of my previo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::85e1ef8bcfd46413d3744aa355fdb820
https://doi.org/10.4236/jsemat.2016.63011
https://doi.org/10.4236/jsemat.2016.63011