Zobrazeno 1 - 10
of 46
pro vyhledávání: '"Mihkel Kiviste"'
Publikováno v:
Buildings, Vol 13, Iss 12, p 2917 (2023)
Digital construction is expected to reduce the high volume of waste and the labour shortage in the construction sector. The properties of hardened concrete used in 3D printing depend on numerous parameters within the manufacturing process. This study
Externí odkaz:
https://doaj.org/article/88b63ed6958b4f89a51020f00e35d677
Publikováno v:
Energies, Vol 16, Iss 10, p 4220 (2023)
Existing buildings are a source of great potential for energy efficiency through renovation. In this study, the national energy requirements equivalent for the major renovation of existing non-residential buildings using the example of office buildin
Externí odkaz:
https://doaj.org/article/3480fb4ee8c04e63ac13cd9d9d9edfca
Autor:
Antti Kauppinen, Mihkel Kiviste, Joni Pirhonen, Eero Tuominen, Anssi Laukkarinen, Petteri Huttunen, Juha Vinha
Publikováno v:
Buildings, Vol 12, Iss 10, p 1629 (2022)
Air pressure differences are a key factor in the behavior of building ventilation and air leakages through the building envelope. Field measurements of the air pressure differences over the building envelope were conducted in 24 Finnish municipal ser
Externí odkaz:
https://doaj.org/article/2a3a694ab12c437b8b3619990b07f84c
Publikováno v:
Energies, Vol 13, Iss 20, p 5252 (2020)
When the masonry walls of buildings under heritage protection need to be restored and thermally improved, the only option is to use an interior insulation system. This is also the riskiest method of insulating walls in cold climates. Capillary active
Externí odkaz:
https://doaj.org/article/f95fcbbf7b3a4431bd8d9635bfee65fb
Publikováno v:
European Journal of Wood and Wood Products. 80:731-740
Publikováno v:
Wood Material Science & Engineering. 16:358-365
The objective of this study was to evaluate some mechanical properties of OSB/3 after one to ten cycles of soaking and oven/drying (accelerated aging). The modulus of rupture (MOR), modulus of elas...
Publikováno v:
Drvna industrija
Volume 72
Issue 2
Volume 72
Issue 2
The objective of this study was to explore some of the physical and mechanical properties of 9-layer birch (Betula spp.) plywood with the addition of phenol-formaldehyde glue, in cases in which the cutting edges of the samples are coated with the dam
Publikováno v:
Energies, Vol 13, Iss 5252, p 5252 (2020)
Energies; Volume 13; Issue 20; Pages: 5252
Energies; Volume 13; Issue 20; Pages: 5252
When the masonry walls of buildings under heritage protection need to be restored and thermally improved, the only option is to use an interior insulation system. This is also the riskiest method of insulating walls in cold climates. Capillary active
Autor:
Tadas Prasauskas, Dainius Martuzevicius, Anu Aaltonen, Mihkel Kiviste, Ulla Haverinen-Shaughnessy, Virpi Leivo, Liuliu Du, Mari Turunen
Publikováno v:
Science of The Total Environment. 621:398-406
Impacts of energy retrofits on indoor thermal environment, i.e. temperature (T) and relative humidity (RH), as well as ventilation rates and carbon dioxide (CO2) concentrations, were assessed in 46 Finnish and 20 Lithuanian multi-family buildings, in
Autor:
Juha Vinha, Mihkel Kiviste
Publikováno v:
Energy Procedia. 132:879-884
Current paper summarizes the preliminary results of air pressure difference measurements from five new and five retrofitted schools and kindergardens in Helsinki, Finland, as a part of field measurements in a research project COMBI. In general, it ha