Zobrazeno 1 - 10
of 127
pro vyhledávání: '"Miguel Gómez‐Polo"'
Autor:
Aitana Rico-Coderch, Luis F. Félix, María Fernanda Solá-Ruiz, Michell Medina, Rubén Agustín-Panadero, Rocío Ortega, Rocío Cascos, Miguel Gómez-Polo
Publikováno v:
Metals, Vol 14, Iss 7, p 816 (2024)
Background: Dental implant abutment screw loosening is an increasingly common problem, as evidenced by multiple studies that have investigated its causes. The objective of this study was to compare the screw loosening torque values before and after c
Externí odkaz:
https://doaj.org/article/04a0108cf6784957bd9808d450478556
Autor:
Noelia García, Miguel Gómez-Polo, Miriam Fernández, José Luis Antonaya-Martín, Rocío Ortega, Cristina Gómez-Polo, Marta Revilla-León, Rocío Cascos
Publikováno v:
Applied Sciences, Vol 14, Iss 7, p 2966 (2024)
Background: With CAD-CAM, dental models are often fabricated by additive manufacturing (AM) methods. Dental models for implant prostheses involve the manual placement of analogs, which could affect their final fit. Therefore, in this experimental in
Externí odkaz:
https://doaj.org/article/b4305f7cc3ff44c6b61ffc8784d15804
Autor:
Gisela Senent-Vicente, Mar Baixauli-López, Eva González-Angulo, Luisa Fernández-Bravo, Álvaro Zubizarreta-Macho, Miguel Gómez-Polo, Eduardo J. Selva-Otaolaurruchi, Rubén Agustín-Panadero
Publikováno v:
Materials, Vol 16, Iss 23, p 7317 (2023)
Statement of problem: The extraction of fractured abutment screws can be a difficult challenge to overcome. Purpose: To compare the removal capacity, dental implant connection damage, and time required to remove the fractured abutment screws between
Externí odkaz:
https://doaj.org/article/e875ab76fe1b434e9ed45d6b05dd807d
Autor:
Nataly Mory, Rocío Cascos, Alicia Celemín-Viñuela, Cristina Gómez-Polo, Rubén Agustín-Panadero, Miguel Gómez-Polo
Publikováno v:
Biomedicines, Vol 11, Iss 11, p 3036 (2023)
The roughness of the intra-oral surfaces significantly influences the initial adhesion and the retention of microorganisms. The aim of this study was to analyze the surface texture of four different CAD-CAM materials (two high-performance polymers an
Externí odkaz:
https://doaj.org/article/efd6212543d74bbe8b418e0473c781e4
Autor:
Alejandra Díaz Hernández, Ana María Martín Casado, Miguel Gómez-Polo, Alicia Celemín Viñuela, Cristina Gómez-Polo
Publikováno v:
Materials, Vol 16, Iss 20, p 6710 (2023)
No gingival shade guide exists that can be used as a ‘gold standard’ in gingival shade selection. This research, therefore, aimed to determine whether comparable results in subjective gingival shade selection can be achieved using basic gingival
Externí odkaz:
https://doaj.org/article/7524ca4b01b643b3bf003dcff7169c91
Autor:
Rocío Cascos, Alicia Celemín-Viñuela, Nataly Mory-Rubiños, Cristina Gómez-Polo, Rocío Ortega, Rubén Agustín-Panadero, Miguel Gómez-Polo
Publikováno v:
Materials, Vol 16, Iss 19, p 6532 (2023)
This in vitro study aimed to assess the presence of microgaps at the implant–abutment interface in monolithic zirconia partial implant-supported fixed prostheses on transepithelial abutments versus Ti-base abutments. Methods: Sixty conical connecti
Externí odkaz:
https://doaj.org/article/ba495e1bdca345dea4bd27a12511955d
Autor:
Cristina Gómez-Polo, Miguel Gómez-Polo, Norberto Quispe López, Maria Portillo Muñoz, Javier Montero
Publikováno v:
Medicina, Vol 58, Iss 3, p 457 (2022)
Background and Objectives: To study the validity and the degree of representability of the toothguide 3D Master, with 26 physically shade tabs, on the natural tooth colour on a sample of the Spanish population. Materials and Methods: Natural tooth co
Externí odkaz:
https://doaj.org/article/9dcbfe29590f4af48c80cb17e49d1ff8
Autor:
Marta Revilla-León, German O. Gallucci, Mutlu Özcan, Shantanu Vyas, Miguel Gómez-Polo, Vinayak R. Krishnamurthy, Abdul Basir Barmak, Wael Att
Publikováno v:
The Journal of Prosthetic Dentistry. 129:276-292
Statement of problem Artificial intelligence applications are increasing in prosthodontics. Still, the current development and performance of artificial intelligence in prosthodontic applications has not yet been systematically documented and analyze
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::60835aad9fd40d9ab78b67c360382e62
https://doi.org/10.1016/j.prosdent.2021.06.001
https://doi.org/10.1016/j.prosdent.2021.06.001
Publikováno v:
The Journal of Prosthetic Dentistry. 128:1009-1016
Most of the available digital systems are designed to image teeth and soft tissue rather than dental implants. However, although some are marketed specifically to record implant position, whether these products are better for implant scanning is uncl
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::94a4c4a14e341aa07ab55a610e7bba24
https://doi.org/10.1016/j.prosdent.2021.01.032
https://doi.org/10.1016/j.prosdent.2021.01.032
Publikováno v:
The Journal of Prosthetic Dentistry. 128:575-588
Selective laser melting (SLM) additive manufacturing (AM) technologies provide an alternative to conventional casting and milling procedures in fabricating metal-ceramic dental prostheses. However, the quality of porcelain bond strength to the SLM AM
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a5f616e69624c08a59c5ddee4dade6b1
https://doi.org/10.1016/j.prosdent.2021.01.001
https://doi.org/10.1016/j.prosdent.2021.01.001