Zobrazeno 1 - 7
of 7
pro vyhledávání: '"Miguel Ernesto Gutiérrez Rivera"'
Autor:
Elias Ledesma-Orozco, Salvador M. Aceves, Miguel Ernesto Gutiérrez-Rivera, Luis Celaya-García
This article describes the manufacture, testing, and finite element modeling of prototype pressure vessels made of steel and reinforced with high-strength steel wire in the cylindrical part. Vessel prototypes were manufactured with pipe fittings and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::025d1c4f48b69ef1328710c052f702f4
https://doi.org/10.1115/1.0003844v
https://doi.org/10.1115/1.0003844v
Autor:
Javier Rodríguez-Flores, Israel Martínez-Ramírez, Isaí Espinoza-Torres, Miguel Ernesto Gutiérrez-Rivera
Publikováno v:
Revista de Ingeniería Mecánica. :19-26
The objective of this work is to determine the influence of Minimum Quantity Lubrication (MQL) parameters on flank wear during face milling. Furthermore, the values of each factor in which the MQL resulted to be effective were determined. A designed
Autor:
Alan E. Díaz-Mendoza, David Díaz-Infante, Gustavo Capilla-González, Miguel Ernesto Gutiérrez-Rivera, Ismael Ruíz-López, Israel Martínez-Ramírez
Publikováno v:
Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42
In sheet metal forming, residual stresses are related to springback and material failure after the deformation process or during service due to load history. Thus, being able to either calculate or measure such stresses is of great importance. This p
Autor:
Carlos Enrique Valencia Murillo, Miguel Ernesto Gutierrez Rivera, Nicolas Flores Samano, Luis David Celaya Garcia
Publikováno v:
Applied Sciences, Vol 13, Iss 20, p 11540 (2023)
This contribution presents a finite element shell model capable of performing linear vibration analyses of shell-type structures made of functionally graded material (FGM). The model is based on the seven-parameter spectral/hp finite element formulat
Externí odkaz:
https://doaj.org/article/eb2acd01577448e79c596bd0fa805c1d
Publikováno v:
Mathematical and Computational Applications, Vol 28, Iss 4, p 84 (2023)
In this work, a finite element model to perform the thermal–structural analysis of beams made of functionally graded material (FGM) is presented. The formulation is based on the third-order shear deformation theory. The constituents of the FGM are
Externí odkaz:
https://doaj.org/article/992b59cd5a1246f0b754f3a91d6a7dfa
Autor:
Luciana Arronche, Valeria La Saponara, Israel Martínez Ramírez, Elías Ledesma Orozco, Miguel Ernesto Gutiérrez Rivera, Miguel Torres Cisneros
Publikováno v:
Universidad de Guanajuato
UGTO
Redalyc-UGTO
UGTO
Redalyc-UGTO
El objetivo de este trabajo es mostrar la eficiencia de dos geometrías diferentes, hechas de material compuesto híbrido, en carga de impacto respecto a una muestra de referencia. Dos diferentes diseños y una muestra de referencia fueron manufactur
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=od______3056::11d8f93c733bf69a6604cb4871e47676
http://www.redalyc.org/articulo.oa?id=76825124004
http://www.redalyc.org/articulo.oa?id=76825124004
Autor:
Isaí Espinoza-Torres, Israel Martínez-Ramírez, Juan Manuel Sierra-Hernández, Daniel Jauregui-Vazquez, Miguel Ernesto Gutiérrez-Rivera, Felipe de Jesús Torres-Del Carmen, Tania Lozano-Hernández
Publikováno v:
Sensors, Vol 23, Iss 21, p 8968 (2023)
This research presents an experimental study focused on measuring temperature at the tool flank during the up-milling process at high cutting speed. The proposed system deals with emissivity compensation through a two-photodetector system and during
Externí odkaz:
https://doaj.org/article/e1f189c8cf564c3ebf8b941116fc57d4