Zobrazeno 1 - 10
of 50
pro vyhledávání: '"Michiel J. Vellekoop"'
Publikováno v:
Sensors and Actuators B: Chemical. 132:518-524
In this work we describe the design and fabrication of a novel three-dimensional flow focusing device with channel dimensions of 50 μm × 50 μm at the focusing region. The device is suitable for one-by-one cell or particle detection near the channe
Autor:
J. Bastemeijer, Ryoichi Ishihara, Pasqualina M. Sarro, Michiel J. Vellekoop, Andre Bossche, V.P. Iordanov
Publikováno v:
IEEE Sensors Journal, 4 (5)
This paper relates to the use of a thin film of re-crystallized (polycrystalline) silicon as a low-pass rejection filter in the ultraviolet light range and, more particularly, to the use of this layer as a protective layer for semiconductor diodes. T
Publikováno v:
Sensors and Actuators B: Chemical. 102:44-50
In this paper, we present an integrated Coulter counter that applies a liquid aperture. The Coulter aperture is defined by a non-coaxial sheath of a conductive sample liquid that is surrounded on three sides by a non-conductive sheath liquid. The mai
Autor:
J.H. Nieuwenhuis, Michiel J. Vellekoop
Publikováno v:
Sensors and Actuators B: Chemical. 103:331-338
In this paper, the performance of five electrode configurations for particle sorters based on negative dielectrophoresis is compared using a novel analysis method. By equating the formulas for dielectrophoresis, drag and buoyancy, the velocity vector
Autor:
N. Kaun, Josefa R. Baena, P. Svasek, Michiel J. Vellekoop, Bernhard Lendl, Johannes Frank, David A. Moss, Stephan Kulka
Publikováno v:
Analytical and Bioanalytical Chemistry. 378:1735-1740
Microstructures constructed from SU-8 polymer and produced on CaF(2) base plates have been developed for microchip-based analysis systems used to perform FTIR spectroscopic detection using mid-IR synchrotron radiation. The high brilliance of the sync
Autor:
Bernhard Jakoby, Michiel J. Vellekoop
Publikováno v:
Sensors and Actuators A: Physical. 110:28-32
For many applications, the detection of water content in an oily base liquid is of crucial importance. Typical examples are automotive oils, e.g. engine and transmission oils, where water content in the order of a few percent needs to be detected. In
Autor:
Andre Bossche, A. Berthold, Erik Baltussen, Rosanne M. Guijt, Gijs W.K. van Dedem, F. Laugere, Michiel J. Vellekoop, J Bastemeijer, Pascalina Sarro, Gert van der Steen
Publikováno v:
Analytical Chemistry. 75:306-312
In this contribution, a capillary electrophoresis microdevice with an integrated on-chip contactless four-electrode conductivity detector is presented. A 6-cm-long, 70-microm-wide, and 20-microm-deep channel was etched in a glass substrate that was b
Autor:
A. Berthold, Rosanne M. Guijt, Hugo Schellevis, Charles R. de Boer, F. Laugere, Pasqualina M. Sarro, Michiel J. Vellekoop, Mario Laros
Publikováno v:
ELECTROPHORESIS. 23:3511-3519
Glass microdevices for capillary electrophoresis (CE) gained a lot of interest in the development of micrototal analysis systems (μTAS). The fabrication of a μJAS requires integration of sampling, chemical separation and detection systems into a mi
Autor:
V.P. Iordanov, G.W. Lubking, Michiel J. Vellekoop, Pasqualina M. Sarro, Ryoichi Ishihara, Reinoud F. Wolffenbuttel
Publikováno v:
Sensors and Actuators A: Physical. :161-166
A new optical detector system for fluorescence analysis in on-chip high-speed screening arrays is described. It consists of a photodiode covered by a re-crystallized silicon film, which acts as a single-film optical filter. The crystalline structure
Publikováno v:
Sensors and Actuators B: Chemical. 83:98-103
Two level shifting methods are presented to protect the contactless conductivity detector in a micro capillary electrophoresis (CE) device. In the separation channel of a micro CE device an electrical potential is present at the detector area. The co