Zobrazeno 1 - 10
of 15
pro vyhledávání: '"Michal Zouhar"'
Autor:
Pavel Hutař, Luboš Náhlík, Gerald Pinter, Zdeněk Majer, Martin Ševčík, Michal Zouhar, Andreas Frank
Publikováno v:
Polymer Engineering & Science. 56:79-86
Polymer pipe lifetime is conventionally estimated by internal pressure test. However, important for service are also other types of loading as: additional bending, different type of external loading from sand embedding, or effect of the residual stre
Publikováno v:
Mechanics of Composite Materials. 50:9-16
The critical configuration of a crack arrested at a bimaterial interface is estimated. The stability of the crack in the soft material, whose front is situated at the interface between soft and stiff materials and who grows continuously sideways, is
Publikováno v:
Engineering Failure Analysis. 33:151-162
It is widely recognised that quasi-brittle fracture (through initiation and subsequent crack propagation mechanism) at low stresses is the most common mode of failure for high-density polyethylene pressure pipes. Slow crack growth in such pipes usual
Publikováno v:
Key Engineering Materials. :533-536
The most relevant loading conditions for real polymer pipe systems are not only internal pressure, but also loading caused by sand embedding including bending or different kinds of point loads. It has been shown that service lifetime of buried pipes
Publikováno v:
Polymer Testing. 32:106-114
The failure mode termed long time brittle failure (due to slow crack growth – SCG) limits the lifetime of plastic pipes. There are now two main accelerated tests (PENT and FNCT) that enable us to estimate the lifetime of HDPE used in plastics pipes
Publikováno v:
Computational Materials Science. 64:225-228
Surface crack propagation in a thin soft protective layer on a massive stiffer substrate is analysed using generalised linear elastic fracture mechanics. The growth of the initial crack is considered in both forward and sideways directions and the in
Publikováno v:
Key Engineering Materials. :177-180
The most relevant loading conditions for real polymer pipe systems are not only internal pressure, but also loading caused by sand embedding including bending or different kinds of point loads. It has been shown that service lifetime of buried pipes
Publikováno v:
International Journal of Fatigue. 39:75-80
An iterative process for the estimation of a fatigue crack front based on linear elastic fracture mechanics using values of the stress singularity exponent is presented. Based on the assumption of a constant stress singularity exponent along the crac
Publikováno v:
International Journal of Structural Integrity. 3:118-126
PurposeFrom the practical point of view, most relevant damage to high density polyethylene (HDPE) structures is caused by slow crack growth. Therefore, detailed information about this type of damage is necessary. Experimental results transfer from sp
Publikováno v:
Key Engineering Materials. :162-165
The multi-layered structure components of dissimilar materials are used in many engineering applications to protect the base structure from outer damage. Typical examples of coated structures are pipes with the dimensional addition of protective laye