Zobrazeno 1 - 10
of 13
pro vyhledávání: '"Michael Wolpers"'
Publikováno v:
Surface and Coatings Technology. 228:286-295
Reactive electrolyte spreading along the surfaces of different conversion films on zinc galvanized steel in humid air was monitored visually and with a height-regulated scanning Kelvin Probe. Electrochemical impedance spectroscopy and current density
Publikováno v:
Corrosion Science. 60:256-264
The effect of nitrate on the reactivity of commercial Al and Mg containing Zn based coatings on galvanized steel in phosphoric acid has been investigated. For alloy coatings, Zn and Mg dissolution rates increase dramatically when nitrate is present w
Publikováno v:
Corrosion Science. 55:76-89
The degradation of phosphate coatings by electrochemically generated hydroxide has been investigated for two synthetic conversion coatings on electrogalvanized steel simulating the pH increase occurring during corrosion or cataphoretic painting. The
Publikováno v:
Surface and Coatings Technology. 206:3151-3157
The effect of a silicate conversion coating, which was applied on electrogalvanized steel (EG) and hot dip galvanized steel (HDG), on zinc passivation and dissolution is investigated by atomic emission spectroelectrochemistry (AESEC) using anodic/cat
Autor:
Thomas Fili, Cedric Reinartz, Karl-Heinz Stellnberger, Michael Wolpers, and Martin Stratmann, Thomas Paul
Publikováno v:
Faraday Discussions. 107:307-322
The electrochemical quartz crystal microbalance (EQCM) is applied in order to study the technical pretreatment processes of galvanized steel such as alkaline cleaning, chromating and phosphating in modern trication solutions. The mass change associat
Publikováno v:
Thin Solid Films. :592-596
Monomolecular LB films of n-octadecyltrichlorosilane (n-OTS) and chlorodimethyloctadecylsilane (CODS) have been produced on metal substrates like Fe and Ni in order to protect the reactive metal surface against corrosive species like H2O, O2 and SO2.
Publikováno v:
Berichte der Bunsengesellschaft für physikalische Chemie. 95:1365-1375
It is possible to measure the work-function of polymer coated materials with a Kelvin-probe. In a humid atmosphere this work-function is mainly given by the corrosion-potential of the metal substrate. The use of a scanning Kelvinprobe then allows to
Publikováno v:
Applied Surface Science. 45:167-170
Monomolecular Langmuir-Blodgett films of silanes have been prepared on water by using a computer-controlled Langmuir balance. The LB films were transferred from the fluid to solid substrates like Fe, Cr and Ni/Cr alloy. By using scanning electron mic
Publikováno v:
Fresenius' Journal of Analytical Chemistry. 341:337-338