Zobrazeno 1 - 9
of 9
pro vyhledávání: '"Memduh Kurtulmuş"'
Autor:
Memduh Kurtulmuş, Ezgi Dogan
Publikováno v:
Emerging Materials Research. 10:272-277
Undercutting is a welding defect that appears as a groove in the base metal directly along the edges of the weld metal. It is inevitable in fillet and butt joints if improper welding parameters are used in the operation. It is a discontinuity in the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5e2c743e49731e34df819ef46b50d719
https://doi.org/10.1680/jemmr.20.00100
https://doi.org/10.1680/jemmr.20.00100
Publikováno v:
Medžiagotyra, Vol 27, Iss 3, Pp 367-372 (2021)
The variables that are effective in joining high density polyethylene sheets by friction stir welding (FSW) have been investigated. In order to understand the effects of welding parameters, using Taguchi optimization, tool rotation speed, feed rate,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::dd04faf2d60a1b2dac51ed9195304e1e
https://doi.org/10.5755/j02.ms.27591
https://doi.org/10.5755/j02.ms.27591
Autor:
Memduh Kurtulmuş
Publikováno v:
Associate Professor Doctor Memduh Kurtulmuş
Open Chemistry, Vol 16, Iss 1, Pp 511-515 (2018)
Open Chemistry, Vol 16, Iss 1, Pp 511-515 (2018)
Many austenitic stainless steel components are used in the construction of nuclear power plants. These components are joined by different welding processes, and radiation damages occur in the welds during the service life of the plant. The plants are
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::450cc2fcdfcf1ff56dc6a345d6292b96
https://hdl.handle.net/11424/241981
https://hdl.handle.net/11424/241981
Autor:
Memduh Kurtulmuş
Publikováno v:
Issue: 12 1-5
Avrupa Bilim ve Teknoloji Dergisi
Associate Professor Doctor Memduh Kurtulmuş
Avrupa Bilim ve Teknoloji Dergisi
Associate Professor Doctor Memduh Kurtulmuş
Özlü tel ark kaynağı yüksek ergime gücü ve yüksek kaliteli dikiş üretme özelliğine sahip olduğundan kullanımı sürekli artmaktadır. Bu özelliklerin korunması için özlü tel ark kaynağı parametrelerinin yakından kontrol edilmesi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::1116140209b01f0982ace67d20c6811d
https://dergipark.org.tr/tr/pub/ejosat/issue/36844/412996
https://dergipark.org.tr/tr/pub/ejosat/issue/36844/412996
Autor:
Memduh Kurtulmuş
Publikováno v:
Associate Professor Doctor Memduh Kurtulmuş
A-TIG welding is a welding method in which TIG welding is conducted by covering a thin layer of activating flux on the weld bead beforehand. The most significant benefit of this process is the gain in weld penetration depth. A-TIG welds were produced
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::883e65277fe50bf2aa8765751056f18f
https://doi.org/10.24200/sci.2018.20145
https://doi.org/10.24200/sci.2018.20145
Publikováno v:
International Journal of Research in Engineering and Technology. :23-28
Flux cored arc welding(FCAW) process is characterized with its high deposition rate and productivity. Control of the operating parameters in FCAW is essential to obtain high production rates and good quality welds. Bead on plate welds were carried ou
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::90b46c3da07e2f44379708308c4e531e
https://doi.org/10.15623/ijret.2015.0409004
https://doi.org/10.15623/ijret.2015.0409004
Publikováno v:
Materials & Design. 32:4074-4079
Friction stir spot welding parameters affect the weld strength of thermoplastics, such as high density polyethylene (HDPE) sheets. The strength of a friction stir spot weld is usually determined by a lap-shear test. For maximizing the weld strength,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ca235ccd02ba26d311eb48b3b1ad849b
https://doi.org/10.1016/j.matdes.2011.03.014
https://doi.org/10.1016/j.matdes.2011.03.014
Autor:
Memduh Kurtulmuş
Publikováno v:
Scientific Research and Essays. 7
The friction stir spot welding (FSSW) method has four welding parameters: the welding tool rotational speed, tool plunge rate, tool plunge depth, the dwell time and tool retract delay. The effects of these welding parameters on joint formation and we
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d93f394a7b2d3ae935d5870e9cfa6f81
https://doi.org/10.5897/sre11.1909
https://doi.org/10.5897/sre11.1909
Autor:
Memduh Kurtulmuş
Publikováno v:
Associate Professor Doctor Memduh Kurtulmuş
The tungsten (W) inert gas (TIG) welding process that is applied with an active flux deposited on the workpiece surface just before welding is called activated flux TIG (A-TIG) welding. Layer deposition can be achieved by brushing or spraying over th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::0d2e7a2cbf3e2f7b43ac3e70a9fd1312
https://www.icevirtuallibrary.com/doi/abs/10.1680/jemmr.18.00092
https://www.icevirtuallibrary.com/doi/abs/10.1680/jemmr.18.00092