Zobrazeno 1 - 10
of 36
pro vyhledávání: '"Mehmet AKKAŞ"'
Autor:
Bashar Mahmood Ali, Mehmet Akkaş
Publikováno v:
Applied Sciences, Vol 14, Iss 1, p 195 (2023)
This research investigates the compatibility of conventional air conditioning with the principles of green building, highlighting the need for systems that enhance indoor comfort while aligning with environmental sustainability. Though proficient in
Externí odkaz:
https://doaj.org/article/67e65b1a0e4a421598de7d566eedb8c6
Autor:
Bashar Mahmood Ali, Mehmet Akkaş
Publikováno v:
Buildings, Vol 13, Iss 10, p 2581 (2023)
The integration of data sciences and smart technologies in the construction industry, particularly in air conditioning project management, is an important area of research. This study employs the Delphi Method to explore this integration, surveying 4
Externí odkaz:
https://doaj.org/article/4282942a09ba4210b1532d65972a3fe4
Publikováno v:
Gazi Üniversitesi Fen Bilimleri Dergisi, Vol 9, Iss 2, Pp 262-271 (2021)
Today, dry hard turning is widely used in the processing of hardened steel due to its advantages such as low cost, high machining efficiency and green environmental protection. In this study, hard turning tests were carried out under dry cutting cond
Externí odkaz:
https://doaj.org/article/c227ddf71a2a4da6aef55b97028ec00c
Autor:
Mehmet Akkaş, Mustafa Boz
Publikováno v:
Journal of Magnesium and Alloys, Vol 7, Iss 3, Pp 400-413 (2019)
This study intends to determine the pressability and sinterability of AZ91 powder production by gas atomisation method and that of the produced powder for partial production. Therefore, first, a gas atomisation unit has been designed and manufactured
Externí odkaz:
https://doaj.org/article/677de1b05193476e9224019349e6243a
Autor:
Cihan Özorak, Durmuş Kır, M. Mustafa Yıldırım, Mehmet Akkaş, Serkan Islak, Soner Buztoy, Uğur Çalıgülü
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 21, Iss 8, Pp 344-347 (2016)
The present study has been carried out in order to investigate the microstructural properties of WCCo-Mo composite coatings deposited onto a SAE 4140 steel substrate by high velocity oxygen fuel (HVOF) thermal spray. For this purpose, the Mo quantity
Externí odkaz:
https://doaj.org/article/28cadb6115d944e38a0dc43b9be198e6
Autor:
Serkan ISLAK, Durmuş KIR, Soner BUZTOY, Cihan ÖZORAK, Mehmet AKKAŞ, Uğur ÇALIGÜLÜ, M. Mustafa YILDIRIM
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 21, Iss 8, Pp 344-347 (2016)
Bu çalışma, yüksek hızlı oksi yakıt (HVOF) ısıl püskürtme yöntemi ile SAE 4140 çeliği üzerinde üretilen WCCo-Mo kompozit kaplamaların mikroyapısal özelliklerini araştırmak için yapılmıştır. Bu amaç için WCCo tozlarına ila
Externí odkaz:
https://doaj.org/article/055358de04004497ab6cc3bedbaa7d23
Autor:
Serkan Islak, Durmuş Kır, Soner Buztoy, Cihan Özorak, Mehmet Akkaş, Uğur Çalıgülü, M. Mustafa Yıldırım
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 21, Iss 8, Pp 344-347 (2015)
The present study has been carried out in order to investigate the microstructural properties of WCCo-Mo composite coatings deposited onto a SAE 4140 steel substrate by high velocity oxygen fuel (HVOF) thermal spray. For this purpose, the Mo quantity
Externí odkaz:
https://doaj.org/article/ff47f35abf70428ba32bf9e0d36413a4
Autor:
Mehmet Akkaş
Publikováno v:
Materials Research Express, Vol 7, Iss 7, p 076515 (2020)
This paper investigates the microstructural, mechanical, and electrical-conductivity properties of WCCo–Al composite coatings produced on the Al alloy AA2024 using the high-velocity oxygen fuel (HVOF) thermal-spray method. In an experimental study,
Externí odkaz:
https://doaj.org/article/5647701276e1484c8d2f73ffd2b0c923
Publikováno v:
Metallography, Microstructure, and Analysis. 11:736-745
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9dfe4e7678cf41cdbf3e4e3df2bc24d0
https://doi.org/10.1007/s13632-022-00900-8
https://doi.org/10.1007/s13632-022-00900-8
Publikováno v:
Advances in Materials Science. 22:5-18
Main aim of this study is to examine change of microstructural and the mechanical properties of Al-7075 alloy depending on B content added with different proportions. Rapid solidification process used to produce the alloys was carried out with a sing
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6d5a0bc951be6daa3c7efaf358474869
https://doi.org/10.2478/adms-2022-0004
https://doi.org/10.2478/adms-2022-0004