Zobrazeno 1 - 10
of 42
pro vyhledávání: '"Md Jihad Miah"'
Autor:
Suvash Chandra Paul, Shamsul Islam, Abdullah Al Mamun, Naymul Islam, Adewumi John Babafemi, Sih Ying Kong, Md Jihad Miah
Publikováno v:
Eng, Vol 4, Iss 2, Pp 1432-1445 (2023)
Waste tire rubber is one of the most concerning environmental pollution issues. With the increasing demand for automobile production, the rate of waste tire generation has also increased. However, these tires often end up stockpiled and not properly
Externí odkaz:
https://doaj.org/article/21d8c68c5ddc43039ba8319837b24d52
Autor:
Noor Md. Sadiqul Hasan, Md. Habibur Rahman Sobuz, Nur Mohammad Nazmus Shaurdho, Md. Montaseer Meraz, Shuvo Dip Datta, Fahim Shahriyar Aditto, Md. Kawsarul Islam Kabbo, Md Jihad Miah
Publikováno v:
Heliyon, Vol 9, Iss 11, Pp e22296- (2023)
Rising natural resource consumption leads to increased hazardous gas emissions, necessitating the concrete industry's focus on sustainable alternatives like palm oil fuel ash (POFA) to replace cement. Also, advanced machine learning (ML) techniques c
Externí odkaz:
https://doaj.org/article/e3c3226b895c48148602c86199b18d08
Publikováno v:
Environmental and Sustainability Indicators, Vol 12, Iss , Pp 100146- (2021)
This study reports four heavy metals, i.e., Zinc (Zn), Chromium (Cr), Nickel (Ni), and Lead (Pb) removal from landfill leachate employing two-hybrid subsurface flow constructed wetland systems; each system included a vertical flow (VF) followed by a
Externí odkaz:
https://doaj.org/article/3f4b89ce7f7b43b99fd6ad3f2db19347
Autor:
Adewumi John Babafemi, Hendrick Knobel, John Temitope Kolawole, Olaonipekun Moses Oyebanjo, Nenita Ntumba Bukalo, Suvash Chandra Paul, Md Jihad Miah
Publikováno v:
Applied Sciences, Vol 12, Iss 21, p 10751 (2022)
Limestone calcined clay cement (LC3) has considerable potential for large-scale implementation. We investigated three selected kaolinitic clays at different locations in South Africa. LC3 mortars were compared to Portland cement mortar as control, pa
Externí odkaz:
https://doaj.org/article/7722d57642c74b13a368b8338d889607
Autor:
Suvash Chandra Paul, Adewumi John Babafemi, Md Jihad Miah, Md Abdul Basit, Noor Md. Sadiqul Hasan, Sih Ying Kong
Publikováno v:
Infrastructures, Vol 7, Iss 10, p 145 (2022)
Admixtures are an integral part of modern cementitious materials, as they significantly enhance the rheological, mechanical, and durability properties of the material. Though manufactured admixtures are mainly used in concrete production, they are ex
Externí odkaz:
https://doaj.org/article/639d3baa0fbc4e84997d1252d0178710
Autor:
Yih Chen Khern, Suvash Chandra Paul, Sih Ying Kong, Adewumi John Babafemi, Vivi Anggraini, Md Jihad Miah, Branko Šavija
Publikováno v:
Frontiers in Materials, Vol 7 (2020)
Studies have shown that the incorporation of waste tire rubber aggregates reduces the strength, increases permeability and decrease thermal conductivity of concrete. However, only a few studies have investigated the effect of surface-modified rubber
Externí odkaz:
https://doaj.org/article/93aa84e4021b4fdd8c61e12392fca45a
Publikováno v:
Materials, Vol 14, Iss 21, p 6268 (2021)
This research investigates the flexural and durability performances of reinforced concrete (RC) beams made with induction furnace steel slag aggregate (IFSSA) as a replacement for fired clay brick aggregate (FCBA). To achieve this, 27 RC beams (lengt
Externí odkaz:
https://doaj.org/article/c4460f50a193407ebcd54c1af210dd74
Publikováno v:
Materials, Vol 14, Iss 9, p 2113 (2021)
The use of waste streams for the production of sustainable cement-based materials cannot be overemphasized. This study investigates the feasibility of reusing waste steel slag (WSS) and waste clay brick (WCB) as a replacement for natural sand (NS) in
Externí odkaz:
https://doaj.org/article/c31d56f5ad434b56a319efcb01d1aa47
Publikováno v:
Polymers, Vol 12, Iss 10, p 2270 (2020)
This paper investigated the static behaviour of glass fibre reinforced polymer (GFRP) built-up hollow and concrete filled built-up beams tested under four-point bending with a span-to-depth ratio of 1.67, therefore focusing their shear performance. T
Externí odkaz:
https://doaj.org/article/aa65c1d7abe8441cb0dd3faba3d8e558
Autor:
Md Jihad Miah, Md. Munir Hossain Patoary, Suvash Chandra Paul, Adewumi John Babafemi, Biranchi Panda
Publikováno v:
Materials, Vol 13, Iss 12, p 2865 (2020)
This paper investigates the possibility of utilizing steel slags produced in the steelmaking industry as an alternative to burnt clay brick aggregate (BA) in concrete. Within this context, physical, mechanical (i.e., compressive and splitting tensile
Externí odkaz:
https://doaj.org/article/fc13c6f0429043a8b1981dab6cdf57d4