Zobrazeno 1 - 10
of 28
pro vyhledávání: '"Masoud Barekat"'
Autor:
Ali Soltanipour, Mahmoud Heydarzadeh Sohi, Reza Shoja-Razavi, Masoud Barekat, Mohammad Erfanmanes
Publikováno v:
Heliyon, Vol 10, Iss 9, Pp e30176- (2024)
This investigation aims to study the effect of laser cladding parameters on the microstructure of Stellite 6 on the X19CrMoNbVN11-1 stainless-steel substrate. First, Stellite 6 powder was coated on the X19CrMoNbVN11-1 substrate using the laser claddi
Externí odkaz:
https://doaj.org/article/34f45251557e400cb2a0a00738d2282c
Autor:
Amin Nourollahi, Reza Shoja Razavi, Masoud Barekat, Mohammad Vakilzadeh Anaraki, Mohammad Erfanmanesh
Publikováno v:
Journal of Materials Research and Technology, Vol 13, Iss , Pp 590-601 (2021)
Titanium alloys require a special protecting atmosphere during the fabrication process due to their strong affinity with oxygen and nitrogen elements at high temperatures. In this study, the effects of different protection conditions on microstructur
Externí odkaz:
https://doaj.org/article/37f6f0584a244a479eb59531cc3a48b8
Autor:
Mohammad Erfanmanesh, Reza Shoja-Razavi, Masoud Barekat, Sayed Hamid Hashemi, Mohammad-Reza Borhani, Hamed Naderi-Samani, Morteza Ilanlou, Amin Nourollahi
Publikováno v:
Journal of Adhesion Science and Technology. :1-21
Autor:
Mohammad Vakilzadeh Anaraki, Amin Nourollahi, Masoud Barekat, Reza Shoja Razavi, Mohammad Erfanmanesh
Publikováno v:
Journal of Materials Research and Technology, Vol 13, Iss, Pp 590-601 (2021)
Titanium alloys require a special protecting atmosphere during the fabrication process due to their strong affinity with oxygen and nitrogen elements at high temperatures. In this study, the effects of different protection conditions on microstructur
Publikováno v:
Metals and Materials International. 27:1531-1539
In this work, the wear performance of nano- and ordinary MoSi2 plasma-sprayed coating on Ni substrate are compared. MoSi2 nanopowder is prepared by ball milling followed by heat treatment processes. Atmospheric plasma spraying with argon atmosphere p
Autor:
Ali Soltanipour, Mahmoud Heydarzadeh Sohi, Reza Shoja-Razavi, Masoud Barekat, Mohammad Erfanmanesh
Publikováno v:
SSRN Electronic Journal.
Publikováno v:
Metals and Materials International. 26:668-681
It is requisite in laser-aided direct metal deposition (LADMD) to investigate the influence of three key process parameters (laser power, scanning speed, and powder feeding rate) on geometric characteristics of single-track deposits so as to acquire
Autor:
Masoud Barekat, Hassan Abdollah-Pour, Mohammad Erfanmanesh, Reza Shoja-Razavi, Sayed Hamid Hashemi, Hamidreza Mohammadian-Semnani
Publikováno v:
International Journal of Refractory Metals and Hard Materials. 81:137-148
This research investigates the wear performance of WC-12Co and electroless Ni/WC-Co deposits at high temperature. Dry sliding wear experiments were carried out for coated and uncoated steel substrate against alumina pin. The microstructure and wear p
Publikováno v:
Engineering Failure Analysis. 97:234-241
Laser cladding of Ti-6Al-4V powder on a substrate with the same chemical composition was performed at different laser powers. The effect of laser power on the microstructure and corrosion behavior was then investigated. Electrochemical studies were p
Publikováno v:
Optics & Laser Technology. 100:265-271
In this article, Ti-6Al-4V powder alloy was directly deposited on Ti-6Al-4V substrate using laser cladding process. In this process, some key parameters such as laser power (P), laser scanning rate (V) and powder feeding rate (F) play important roles