Zobrazeno 1 - 10
of 517
pro vyhledávání: '"Masaaki Futamoto"'
Autor:
Shunsuke Aketa, Mitsuru Ohtake, Eishi Ishikawa, Yuta Nakamura, Tetsuroh Kawai, Masaaki Futamoto
Publikováno v:
AIP Advances, Vol 13, Iss 3, Pp 035201-035201-5 (2023)
Ni100−xFex (at. %) films of about 37 μm thickness are electroplated on Cu base plates of 50 mm length, 10 mm width, and 300 μm thickness by varying the composition from x = 0 to 99. They are applied to cantilevers in magnetostrictive vibration po
Externí odkaz:
https://doaj.org/article/0d39baac8c084b0ebf857127ab0bc164
Autor:
Kosuke Imamura, Mitsuru Ohtake, Shinji Isogami, Masaaki Futamoto, Tetsuroh Kawai, Fumiyoshi Kirino, Nobuyuki Inaba
Publikováno v:
AIP Advances, Vol 13, Iss 2, Pp 025110-025110-5 (2023)
A Mn4N thin film is prepared on MgO(001) single-crystal substrate by introducing VN underlayer and caplayer which are respectively expected to inhibit the oxidation from substrate and surface. The thin film is prepared by ultra-high vacuum radio-freq
Externí odkaz:
https://doaj.org/article/a2dd2df1e22d4373b345e8e4b7fd2b8a
Autor:
Shota Noro, Mitsuru Ohtake, Tetsuroh Kawai, Masaaki Futamoto, Fumiyoshi Kirino, Nobuyuki Inaba
Publikováno v:
AIP Advances, Vol 12, Iss 3, Pp 035144-035144-4 (2022)
Co75Fe25 (at. %) alloy films of 100 nm thickness are prepared on MgO(001) and (110) single-crystal substrates. A Co75Fe25(001)bcc single-crystal film is epitaxially grown on the MgO(001) substrate, whereas a Co75Fe25(211)bcc bi-crystalline film is fo
Externí odkaz:
https://doaj.org/article/5715060d1d7340cba5bfee433947556f
Autor:
Shota Noro, Kotaro Nakano, Mitsuru Ohtake, Shinji Isogami, Masaaki Futamoto, Tetsuroh Kawai, Fumiyoshi Kirino, Nobuyuki Inaba
Publikováno v:
IEEE Transactions on Magnetics. 58:1-5
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e0f442186a0f1521cfd411ac6f412f55
https://doi.org/10.1109/tmag.2022.3151235
https://doi.org/10.1109/tmag.2022.3151235
Publikováno v:
AIP Advances, Vol 8, Iss 5, Pp 056324-056324-6 (2018)
Ultra-thin L10-FePt films of 2 nm average thickness are prepared on (001) oriented MgO and VN underlayers epitaxially grown on base substrate of SrTiO3(001) single crystal. Detailed cross-sectional structures are observed by high-resolution transmiss
Externí odkaz:
https://doaj.org/article/c0f540a5317c437fb44e1330bc6ee141
Publikováno v:
AIP Advances, Vol 8, Iss 4, Pp 047710-047710-9 (2018)
Fe100–xAlx (x = 0, 4, 10, 20, 30 at. %) alloy films of 40 nm thickness are prepared on MgO(001) single-crystal substrates by varying substrate temperature from room temperature to 600 °C. Single-crystal films of (001) orientation with bcc-based di
Externí odkaz:
https://doaj.org/article/5ad45d03335449099f554ca7d79ab609
Publikováno v:
AIP Advances, Vol 8, Iss 4, Pp 047709-047709-6 (2018)
Fe70Co30 and (Fe70Co30)0.95B5 (at. %) alloy films of 5 nm thickness are prepared by sputtering on cubic (001) oxide substrates at 200 °C. The lattice mismatch between film and substrate is varied from –4.2%, 0%, to +3.5% by employing MgO, MgAl2O4,
Externí odkaz:
https://doaj.org/article/4f5c4a606265486982ed97e630547de0
Publikováno v:
AIP Advances, Vol 7, Iss 5, Pp 056320-056320-5 (2017)
FePt alloy thin films with cap-layers of MgO or C are prepared on MgO(001) single-crystal substrates by using a two-step method consisting of low-temperature deposition at 200 °C followed by high-temperature annealing at 600 °C. The FePt film thick
Externí odkaz:
https://doaj.org/article/13a0045f0c8241d09d76d2172db55c71
Publikováno v:
AIP Advances, Vol 6, Iss 8, Pp 085302-085302-11 (2016)
Formation of L10-oredered structure from disordered A1 phase has been investigated for FePt and FePd films on MgO(001) substrates employing a two-step method consisting of low temperature deposition at 200 °C followed by high-temperature annealing a
Externí odkaz:
https://doaj.org/article/c189a56e6c374008b3f1de88ca2ac0cf