Zobrazeno 1 - 10
of 25
pro vyhledávání: '"Martha Patricia Guerrero Mata"'
Autor:
Luis Wilfredo Hernández González, Yassmin Seid Ahmed, Roberto Pérez Rodríguez, Patricia Del Carmen Zambrano Robledo, Martha Patricia Guerrero Mata
Publikováno v:
Journal of Manufacturing and Materials Processing, Vol 2, Iss 4, p 66 (2018)
The manufacturing industry aims to produce many high quality products efficiently at low cost, thereby motivating companies to use advanced manufacturing technologies. The use of high-speed machining is increasingly widespread; however, it lacks a de
Externí odkaz:
https://doaj.org/article/6189a8f758a5484ca6b9dc9289558243
Autor:
Pedro Jacinto Páramo-Kañetas, Eligio Alberto Orozco-Mendoza, Jessica Calvo, José-María Cabrera-Marrero, Marco Antonio Zamora-Antuñano, Martha Patricia Guerrero-Mata
Publikováno v:
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
Universitat Politècnica de Catalunya (UPC)
Large volume fractions of stable d-phase in nickel-based superalloys, such as in Inconel 718 (IN718), are being avoided in the forging industry because of their deleterious effect in causing brittleness. However, it has been found that a proper morph
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::1b7bd0627135a7d6e50ad88849880ff2
Autor:
Marco Antonio Zamora-Antuñano, Pedro Jacinto Páramo-Kañetas, Martha Patricia Guerrero-Mata, Jose Maria Cabrera-Marrero, Utkudeniz Ozturk, Jessica Calvo
Publikováno v:
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
Universitat Politècnica de Catalunya (UPC)
Delta-Processing (DP) is a suitable heat treatment process aiming at controlling grain growth during hot deformation of the well-known Ni-base superalloy Inconel 718 (IN718). DP is often applied by heating up to 900 °C for 24 h in order to promote d
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6e8a0ff908b4735f1f151ec0d4848995
https://hdl.handle.net/2117/344809
https://hdl.handle.net/2117/344809
Autor:
Jessica Calvo, Marco Antonio Zamora Antuñano, Martha Patricia Guerrero-Mata, José María Cabrera Marrero, Pablo Rodriguez-Calvillo, Pedro Jacinto Paramo Kañetas
Publikováno v:
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
Metals
Volume 10
Issue 11
Metals, Vol 10, Iss 1466, p 1466 (2020)
Universitat Politècnica de Catalunya (UPC)
Metals
Volume 10
Issue 11
Metals, Vol 10, Iss 1466, p 1466 (2020)
Nickel-based superalloys are extensively used in the aerospace and power generation industries due to their excellent mechanical properties at elevated temperatures and good corrosion resistance. Typically, these alloys require accomplishing critical
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::744e18896d8515f996e033cbf2fb828e
http://hdl.handle.net/2117/334023
http://hdl.handle.net/2117/334023
Autor:
Miguel Fernando Delgado-Pamanes, Zeydy Lizbeth Olvera-Vázquez, S. I. Maldonado-Ruiz, Martha Patricia Guerrero-Mata
Publikováno v:
Welding International. 32:629-639
Resistance spot welding is the most important method in the industry of self-supporting or monocoque body joinery because of its automation, its speed, the flexibility of welding parts with...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::10c3c64f77161ed986ee071d619a89f0
https://doi.org/10.1080/09507116.2017.1347352
https://doi.org/10.1080/09507116.2017.1347352
Autor:
José-María Cabrera, Jessica Calvo, Martha Patricia Guerrero-Mata, Pedro Páramo-Kañetas, Utkudeniz Ozturk
Publikováno v:
Recercat. Dipósit de la Recerca de Catalunya
instname
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
instname
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
© 2017 Elsevier B.V. The hot-flow behavior of Inconel 718 subjected to delta processing (DP) was analyzed. Hot compression tests were subsequently performed at 960 °C and 1020 °C at the four different strain rates of 0.001, 0.01, 0.1, and 1 s-1. T
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f4a4b3feca20c1b35e567f9683b8365f
https://doi.org/10.1016/j.jmatprotec.2017.12.014
https://doi.org/10.1016/j.jmatprotec.2017.12.014
Autor:
G. M. Martinez-Cazares, George E. Totten, Marcel Carpio, Martha Patricia Guerrero-Mata, Yaneth Bedolla-Gil, D. E. Lozano
Publikováno v:
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
Recercat. Dipósit de la Recerca de Catalunya
instname
Materials, Vol 12, Iss 7, p 1154 (2019)
Materials
Volume 12
Issue 7
Universitat Politècnica de Catalunya (UPC)
Recercat. Dipósit de la Recerca de Catalunya
instname
Materials, Vol 12, Iss 7, p 1154 (2019)
Materials
Volume 12
Issue 7
Automotive components manufacturers use the 5160 steel in leaf and coil springs. The industrial heat treatment process consists in austenitizing followed by the oil quenching and tempering process. Typically, compressive residual stresses are induced
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8d73b4d4034cb7da4db4f9c97c83be43
http://hdl.handle.net/2117/133730
http://hdl.handle.net/2117/133730
Publikováno v:
Journal of Materials Engineering and Performance. 25:179-187
The microstructure evolution of nickel-based superalloys has a great influence on the mechanical behavior during service conditions. Microstructure modification and the effect of process variables such as forging temperature, die-speed, and tool heat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::035b61d5ff4b1140af5d7c06436f5a40
https://doi.org/10.1007/s11665-015-1828-z
https://doi.org/10.1007/s11665-015-1828-z
Autor:
Francisco Cepeda Rodriguez, Martha Patricia Guerrero Mata, Carlos Alberto Guevara Chavez, Pedro Hernandez Gutierrez, Jose Jorge Ruiz Mondragon, Jorge Leobardo Acevedo Davila
Publikováno v:
Soldagem & Inspeção, Volume: 21, Issue: 2, Pages: 156-164, Published: JUN 2016
Soldagem & Inspeção, Vol 21, Iss 2, Pp 156-164
Soldagem & Inspeção v.21 n.2 2016
Revista soldagem & inspeção
Associação Brasileira de Soldagem (ABS)
instacron:ABS
Soldagem & Inspeção, Vol 21, Iss 2, Pp 156-164
Soldagem & Inspeção v.21 n.2 2016
Revista soldagem & inspeção
Associação Brasileira de Soldagem (ABS)
instacron:ABS
The aim of this research is to present a comparative analysis between theoretical and experimental thermal fields as well as a microstructural behaviour and residual stresses applying multiple weld beads in the joint of two API 5L X52 pipe sections.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e3af685d666827fb878f97b34d55a962
http://www.scielo.br/scielo.php?script=sci_arttext&pid=S0104-92242016000200156&lng=en&tlng=en
http://www.scielo.br/scielo.php?script=sci_arttext&pid=S0104-92242016000200156&lng=en&tlng=en
Publikováno v:
Andreassen, M J, Yu, Z, Liu, S & Guerrero-Mata, M P 2016, Comparison of Welding Residual Stresses of Hybrid Laser-Arc Welding and Submerged Arc Welding in Offshore Steel Structures . in Proceedings of the 10th International Conference on Trends in Welding Research . pp. 96-101, 10th International Conference on Trends in Welding Research, Tokyo, Japan, 11/10/2016 .
Technical University of Denmark Orbit
Technical University of Denmark Orbit
In the offshore industry, welding-induced distortion and tensile residual stresses have become a major concern in relation to the structural integrity of a welded structure. Particularly, the continuous increase in size of welded plates and joints ne
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::7eacb08b0d1ca34d0fd54fd0305bf3b2
https://orbit.dtu.dk/en/publications/e1617dee-c211-422d-9c4c-a5cb8fca823d
https://orbit.dtu.dk/en/publications/e1617dee-c211-422d-9c4c-a5cb8fca823d