Solidification microstructure and residual stress correlations in direct energy deposited type 316L stainless steel

Autor: Da Guo, Kun Yan, Mark D. Callaghan, Dominik Daisenberger, Mark Chatterton, Jiadong Chen, Andrew Wisbey, Wajira Mirihanage

Publikováno v: Materials & Design, Vol 207, Iss , Pp 109782- (2021)

Localised fluctuation in residual stress distribution for direct energy deposited 316L stainless steel thin plate was revealed through high-energy synchrotron X-ray diffraction. The macroscopic residual stress levels are changed steadily across the a

Externí odkaz: https://doaj.org/article/6e94a28478724636b8f734a22d148ec3

Creep performance of carburized 316H stainless steel at 550°C

Autor: Mark D. Callaghan, Enrique Jimenez-Melero, Kun Yan, Jackn Eaton-Mckay

Publikováno v: Eaton-Mckay, J, Yan, K, Callaghan, M D & Jimenez-Melero, E 2022, ' Creep performance of carburized 316H stainless steel at 550°C ', Journal of Nuclear Materials, vol. 558, pp. 153329 . https://doi.org/10.1016/j.jnucmat.2021.153329

The creep behaviour of two ex-service type 316H austenitic stainless steel casts with different Mn contents and austenite grain size, that were pre-carburized for either 8000 h at 550 °C or 3000 h at 600 °C in simulated CO2-rich gas environment of

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::470cea653f00abd712d4ae1959e2fc89
https://doi.org/10.1016/j.jnucmat.2021.153329

Residual stress distributions in arc, laser and electron-beam welds in 30 mm thick SA508 steel: A cross-process comparison

Autor: Neil Irvine, J. Balakrishnan, John Francis, Matthew Roy, Mark D. Callaghan, Michael Smith, Anastasia Vasileiou

Publikováno v: Balakrishnan, J, Vasileiou, A, Francis, J, Smith, M, Roy, M, Callaghan, M D & Irvine, N 2018, ' Residual Stress Distributions in Arc, Laser and Electron-Beam Welds in 30 mm Thick SA508 Steel : A Cross-Process Comparison ', International Journal of Pressure Vessels and Piping, vol. 162, pp. 59-70 . https://doi.org/10.1016/j.ijpvp.2018.03.004

Safety-critical pressure vessels in pressurised water reactors (PWRs), such as the reactor pressure vessel and the steam generators, have been fabricated using arc welding processes for several decades. However, recent interest in nuclear new-build p

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b8a8e6c940124a34631588333a150be0
https://doi.org/10.1016/j.ijpvp.2018.03.004

Anomalous α-Mg Dendrite Growth During Directional Solidification of a Mg-Zn Alloy

Autor: Sansan Shuai, Qiwei Zheng, Mingyue Wang, Enyu Guo, Tao Jing, Peter D. Lee, Mark D. Callaghan

Publikováno v: Shuai, S, Guo, E, Wang, M, Callaghan, M D, Jing, T, Zheng, Q & Lee, P D 2016, ' Anomalous α-Mg Dendrite Growth During Directional Solidification of a Mg-Zn Alloy ' Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol 47, no. 9, pp. 4368-4373 . DOI: 10.1007/s11661-016-3618-0
Shuai, S, Guo, E, Wang, M, Callaghan, M D, Jing, T, Zheng, Q & Lee, P D 2016, ' Anomalous α-Mg Dendrite Growth During Directional Solidification of a Mg-Zn Alloy ', Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, vol. 47, no. 9, pp. 4368-4373 . https://doi.org/10.1007/s11661-016-3618-0

Dendritic morphology was investigated in a directionally solidified magnesium-zinc alloy using synchrotron X-ray tomography and electron backscattered diffraction. Unexpectedly, primary dendrites grew along $$ {\langle}21\overline{3}1 {\rangle}$$ ⟨

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::45fb1d0571b4e5490b8cf5f1cfeed1c5
https://doi.org/10.1007/s11661-016-3618-0

Evolution of Microstructure and Toughness in 2.25Cr-1Mo Steel Welds

Autor: Andrew J. Leonard, Ahmed Elrefaey, Yashar Javadi, John Francis, Mark D. Callaghan

Publikováno v: Elrefaey, A, Javadi, Y, Francis, J, Callaghan, M D & Leonard, A J 2018, ' Evolution of Microstructure and Toughness in 2.25Cr-1Mo Steel Welds ', International Journal of Pressure Vessels and Piping, vol. 165 . https://doi.org/10.1016/j.ijpvp.2018.05.006

In oil and gas and other industries, valve bodies are often manufactured using a 2.25Cr-1Mo steel which, if welded, requires post-weld heat treatment (PWHT) in order to restore toughness. The safe operation and long-term integrity of such welds is cr

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::2e3200679d8d3de136bbf3bbfd4b2f4d
https://www.research.manchester.ac.uk/portal/en/publications/evolution-of-microstructure-and-toughness-in-225cr1mo-steel-welds(f96fa830-c162-4127-b50b-b4573f65dca1).html