Zobrazeno 1 - 10
of 134
pro vyhledávání: '"Mark Salomon"'
Autor:
Mark Salomon, Owen Crowther
Publikováno v:
Membranes, Vol 2, Iss 2, Pp 216-227 (2012)
Lithium-air (Li-air) batteries have a much higher theoretical energy density than conventional lithium batteries and other metal air batteries, so they are being developed for applications that require long life. Water vapor from air must be prevente
Externí odkaz:
https://doaj.org/article/1f40668438e94a53be98df0d98542d98
Effect of conductive carbon on capacity of iron phthalocyanine cathodes in primary lithium batteries
Autor:
Keafer Mock, Lin-Shu Du, Owen Crowther, Idajet Bicaku, David M. Moureau, Mark Salomon, L. G. Scanlon, Jacob Lawson, Joseph P. Fellner, Leah R. Lucente
Publikováno v:
Journal of Power Sources. 217:92-97
The effect of conductive carbon type and loading was examined for the iron phthalocyanine (FePc) cathode in primary lithium (Li) batteries. The use of nano graphene platelets (NGPs) as a conductive carbon was shown to increase the discharge capacity
Publikováno v:
Journal of Power Sources. 213:233-238
Recent studies have clearly demonstrated that cyclic and linear carbonates are unstable when used in rechargeable Li–air batteries employing aprotic solvents mostly due to the cathodic formation of superoxide during the oxygen reduction reaction. I
Autor:
Daniel Keeny, David M. Moureau, Mark Salomon, Mary A. Hendrickson, Benjamin Meyer, Owen Crowther
Publikováno v:
Journal of Power Sources. 202:347-351
The electrolyte solution for a primary nonaqueous lithium metal air battery is optimized. A novel oxygen selective membrane consisting of Teflon coated fiberglass cloth is used to prevent corrosion of the lithium metal negative electrode by water vap
Publikováno v:
Journal of Power Sources. 196:1498-1502
In the present communication, we report on recent researches for optimizing the performance of a primary organic-based Li-air cell. These researches focus on new processing technologies for a high capacity and high rate capable carbon cathode, and th
Publikováno v:
Journal of Power Sources. 178:848-851
Composite polymer gelled membranes have been prepared an electrospinning technique. Electrospinning of polymer fibers or electrospraying of particles is typically accomplished by applying a strong electric field (ca. 1–25 kV cm−1) to a polymer so
Publikováno v:
Pure and Applied Chemistry. 79:851-860
A review is presented of the present state-of-the-art of Li-air cells and batteries. We examine the properties of this unique system in terms of the effects of solubilities of reactants and products in both nonaqueous (aprotic) and aqueous electrolyt
Publikováno v:
The Journal of Physical Chemistry B. 109:4492-4496
Conductivity and transport properties have been determined for gelled polymer electrolytes of three compositions: a base PVdF-polymer gel with organic carbonate solvents as plasticizers and LiN(SO(2)C(2)F(5))(2) electrolyte, a second polymer electrol
Publikováno v:
Journal of Power Sources. 141:167-170
Transference number measurements were determined by a direct method for LiClO 4 solutions in propylene carbonate and acetonitrile at 25 °C. A comparison is reported between theoretical calculations of transference numbers using a model based on the
Autor:
Fausto Croce, Mark Salomon, Frank Cassel, Giovanni Battista Appetecchi, Bruno Scrosati, Jusef Hassoun
Publikováno v:
Journal of Power Sources. 124:246-253
The application and characteristics of hot-pressed, nanocomposite, polyethyleneoxide (PEO)-based electrolyte membranes in all solid-state rechargeable, Li/LiFePO 4 polymer cells are presented and discussed. Both electrolyte separators and LiFePO 4 co