Zobrazeno 1 - 10
of 112
pro vyhledávání: '"Mariusz Oleksy"'
Autor:
Patrycja Zakrzewska, Beata Zygmunt-Kowalska, Monika Kuźnia, Dorota Głowacz-Czerwonka, Mariusz Oleksy, Małgorzata Sieradzka
Publikováno v:
Energies, Vol 17, Iss 15, p 3829 (2024)
In recent years, there has been considerable focus on ensuring that energy is used in the most efficient manner possible. This is due to the fact that globally, over 70% of energy is generated from fossil fuels. Consequently, the matter of designing
Externí odkaz:
https://doaj.org/article/189ce415076f40cc952c6f9487b12e10
Autor:
Izabela Skrzypczak, Grzegorz Oleniacz, Agnieszka Leśniak, Maria Mrówczyńska, Marta Rymar, Mariusz Oleksy
Publikováno v:
Heritage Science, Vol 11, Iss 1, Pp 1-14 (2023)
Abstract The article proposes using a novel hybrid measurement method, with expected precision results, to determine the characteristic of the historic, 17th-century bell. In an interdisciplinary approach, modern and non-invasive physical and chemica
Externí odkaz:
https://doaj.org/article/f7676a0f64ee49b7a74d538fa8b17aad
Publikováno v:
Polymers, Vol 16, Iss 10, p 1372 (2024)
In this paper, a novel polylactide-based nanocomposite with the addition of bentonite as a filler, Fusabond, and glycerine as a compatibilizer and plasticizer, were prepared and investigated. Four samples with different contents of bentonite (1, 5, 1
Externí odkaz:
https://doaj.org/article/e14fdb58b4e34bf8b8104429330ef317
Autor:
Grzegorz Budzik, Tomasz Dziubek, Andrzej Kawalec, Paweł Turek, Anna Bazan, Mariusz Dębski, Jerzy Józwik, Przemysław Poliński, Mateusz Kiełbicki, Łukasz Kochmański, Mariusz Oleksy, Józef Cebulski, Andrzej Paszkiewicz, Ivan Kuric
Publikováno v:
Advances in Sciences and Technology, Vol 17, Iss 1, Pp 35-45 (2023)
Abstract: Additive processes allow for almost any manufacturing of screw-threaded joint elements. However, this requires knowledge of the geometrical relationships of a threaded itself and the strength of materials from which the screw-threaded joint
Externí odkaz:
https://doaj.org/article/9f6c5587671047bcba3263e392064ba6
Publikováno v:
Polymers, Vol 16, Iss 5, p 592 (2024)
Additive manufacturing is still the fastest-developing technology in the modern world. Three-dimensional printing has become popular due to the method’s numerous advantages, such as its short time and low cost, compared to conventional methods such
Externí odkaz:
https://doaj.org/article/65a74e006c3d4c0aa5ddd752209ef434
Publikováno v:
Applied Sciences, Vol 13, Iss 22, p 12385 (2023)
Introduction: There is no standardised, universal method to assess physical conditions such as pressure in the pelvicalyceal system in real time during RIRS (retrograde intrarenal surgery). Therefore, the problem of increased pressure in the upper ur
Externí odkaz:
https://doaj.org/article/632e169c873a40c3b9a86408e60a5d23
Autor:
Grzegorz Budzik, Michał Wieczorowski, Mariusz Oleksy, Łukasz Przeszłowski, Andrzej Paszkiewicz, Bartłomiej Sobolewski, Joanna Woźniak, Rafał Oliwa
Publikováno v:
Tehnički Glasnik, Vol 16, Iss 2, Pp 252-257 (2022)
The article presents the place of 3D printing in the manufacturing and operational process. It analyzes selected incremental technologies in the product life cycle. It describes selected processes for testing the properties of materials used in 3D pr
Externí odkaz:
https://doaj.org/article/1cc2371e82644eb4bf76a87d9e777b00
Publikováno v:
Polymers, Vol 15, Iss 6, p 1565 (2023)
As part of this work, polymer composites based on polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) were obtained and used in 3D printing technology, particularly Melted Extrusion Modeling (MEM) technology. The influence of selected fillers on t
Externí odkaz:
https://doaj.org/article/7c1545706e344d10b523681bf5284b1b
Publikováno v:
Polymers, Vol 14, Iss 22, p 5000 (2022)
As part of the work, innovative hybrid polymer composites dedicated to rapid prototyping, especially for 3D printing with the melted and extruded manufacturing (MEM) technique, were developed. For this purpose, the influence of modified fillers, such
Externí odkaz:
https://doaj.org/article/be462c3585d34fba9c3b3aef74f2cf57
Autor:
Dariusz Krajewski, Mariusz Oleksy, Rafał Oliwa, Katarzyna Bulanda, Kamil Czech, Damian Mazur, Grzegorz Masłowski
Publikováno v:
Energies, Vol 15, Iss 13, p 4562 (2022)
This paper presents ways to modify epoxy resin matrix composites to increase their electrical conductivity. Good electrical properties are particularly important for materials used in the construction of vehicles (cars, trains, airplanes) and other o
Externí odkaz:
https://doaj.org/article/1163f86e3fdc451091c54b746395e49e