Zobrazeno 1 - 10
of 14
pro vyhledávání: '"Marek Kowalik"'
Autor:
Jarosław Chodór, Leon Kukiełka, Grzegorz Chomka, Łukasz Bohdal, Radosław Patyk, Marek Kowalik, Tomasz Trzepieciński, Andrii M. Radchenko
Publikováno v:
Applied Sciences, Vol 13, Iss 3, p 1963 (2023)
This article concerns the application of the FEM method for the prediction of stress and deformation states in the workpiece during diamond sliding burnishing (DSB). An updated Lagrange (UL) description was used to describe the phenomena at a typical
Externí odkaz:
https://doaj.org/article/97c63e559ba04d7d83d0c0d35ff057b6
Autor:
Paweł Maciąg, Leon Kukielka, P. Paszta, Marek Kowalik, Stanisław Legutko, Tomasz Trzepieciński
Publikováno v:
Materials
Volume 14
Issue 19
Materials, Vol 14, Iss 5844, p 5844 (2021)
Volume 14
Issue 19
Materials, Vol 14, Iss 5844, p 5844 (2021)
The article presents the results of investigations into the depth of the plastically deformed surface layer in the roller burnishing process. The investigation was carried out in order to obtain information on the dependence relationship between the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6a60aff3ffbe2c4bc2db3b4f206c3e3d
Publikováno v:
Strength of Materials. 50:493-503
This paper presents the methods used to determine the depth of the plastically deformed top layer in the roller burnishing process. An analytical method was developed for determining the depth of the plastically deformed layer on the basis of the Her
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::2396449d4c2a8b1ceb503c766bc9a9a2
https://doi.org/10.1007/s11223-018-9994-5
https://doi.org/10.1007/s11223-018-9994-5
Autor:
Marek Kowalik, Tomasz Trzepieciński
Publikováno v:
AIP Conference Proceedings.
This article presents the technology used for straightening large-dimension shafts through irregular burnishing. Irregular burnishing is performed on part of the cylindrical surface while the opposite surface is not burnished. The aim of straightenin
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::641fefaeef66fbdd3c7503ac29452b46
https://doi.org/10.1063/1.5112555
https://doi.org/10.1063/1.5112555
Publikováno v:
Measurement Science Review, Vol 16, Iss 5, Pp 254-259 (2016)
Measuring errors caused by deformation (flattening) of a measured object appear under the influence of pressure force and weight of the measured object. Plastic strain, arising at the contact of a measured object and an undeformable contact tip of a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::1d981a67c5b67e64eae7540c197dd7ff
https://doi.org/10.1515/msr-2016-0031
https://doi.org/10.1515/msr-2016-0031
Autor:
Marek Kowalik, Tomasz Trzepieciński
Publikováno v:
AIP Conference Proceedings.
The subject of this paper is an analysis of the determination of the depth of the plastically deformed layer in the process of roller burnishing a shaft using a newly developed method in which a braking moment is applied to the roller. It is possible
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2dcf6293cd849e86798fa2f243774244
https://doi.org/10.1063/1.5034865
https://doi.org/10.1063/1.5034865
Autor:
Tomasz Trzepieciński, Marek Kowalik
Publikováno v:
MATEC Web of Conferences, Vol 290, p 03008 (2019)
This paper presents the methods of experimental determining the depth of the plastically deformed top layer in the roller burnishing process. Precise determination of the depth of the plastically deformed layer is difficult due to slight deformation
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::94e2402764b274072c738723dd6bd805
https://doi.org/10.1051/matecconf/201929003008
https://doi.org/10.1051/matecconf/201929003008
Autor:
Marek Kowalik, Tomasz Trzepieciński
Publikováno v:
Arabian Journal for Science and Engineering. 39:1251-1260
The paper concerns the results of investigations on estimation of forces during longitudinal cold rolling of a shaft. It is difficult to determine theoretically the unit pressure and area of roller-shaft contact in the rolling process taking into con
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b53a2600f16e34eb85e00e3a4fb236df
https://doi.org/10.1007/s13369-013-0722-y
https://doi.org/10.1007/s13369-013-0722-y
Autor:
Marek Kowalik
Publikováno v:
Scientific Letters of Rzeszow University of Technology - Mechanics. 30:161-170
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ead9e08517b53f7b03e6758dbacd6c80
https://doi.org/10.7862/rm.2013.15
https://doi.org/10.7862/rm.2013.15