Zobrazeno 1 - 6
of 6
pro vyhledávání: '"Marcin Zbieć"'
Autor:
Natkuncaran Jegatheswaran, Jegatheswaran Ratnasingam, Marcin Zbiec, Florin Ioras, Choon Liat Lim, Hazirah Ab Latib
Publikováno v:
BioResources, Vol 19, Iss 3, Pp 4800-4823 (2024)
Forest carbon credit project developments throughout the world can contribute to nature-based solutions to mitigate climate change. With Malaysia’s large forest endowment, a study was conducted to evaluate the awareness and knowledge among forest o
Externí odkaz:
https://doaj.org/article/ed1a37512ea544a895607590c64db0fe
Publikováno v:
Energies, Vol 15, Iss 12, p 4352 (2022)
Over 30% of the world’s land area is covered by forests. Approximately 761 million m3 of wood is harvested annually in Europe (2017). The aim of the paper is to assess the amount of wood (biomass) produced in Europe per year, as it determines the a
Externí odkaz:
https://doaj.org/article/02b7e539088f4141b79d6c9454c8fcf3
Autor:
Agnieszka Jankowska, Marcin Zbieć, Paweł Kozakiewicz, Grzegorz Koczan, Sylwia Oleńska, Piotr Beer
Publikováno v:
Maderas: Ciencia y Tecnología, Vol 20, Iss 3 (2018)
The main objective of this work was to evaluate the effects of two machining processes on European oak wood surface characteristics. The relationships between wettability, free surface energy and machining methods were studied. Sawing and slicing, wi
Externí odkaz:
https://doaj.org/article/ccb701c0ebb245eab133ad6b8099213e
Publikováno v:
BioResources, Vol 10, Iss 1, Pp 457-468 (2014)
This work compares the effectiveness of local reinforcements of pine beams. Test beams were reinforced with carbon fiber reinforced polymer (CFRP) tape and layered laminate bamboo composite (LLBC) plates. The effective length of local reinforcement r
Externí odkaz:
https://doaj.org/article/6bfd0e4b4e7645d28e3f74011218af44
Autor:
Marcin Zbieć
Publikováno v:
Drvna Industrija, Vol 62, Iss 1, Pp 43-54 (2011)
This paper deals with simple neural network-based diagnostic system, applied to tool wear prediction in MDF milling. Ten tools were used for the test, and each one was consequently worn in the process of MDF milling. During the wearing process, the k
Externí odkaz:
https://doaj.org/article/8cb2d55c1c294407bc5c0dc31c6c9ca7
Publikováno v:
Drvna Industrija, Vol 61, Iss 3, Pp 193-196 (2010)
Veneer densification was performed at 105±3 ºC under pressure of 1,8 N/mm2 for 30 s. The approach allowed to reduce 20-mm thick plywood pressing time by 12-25 % when compared to the non-densified controls. It was found that densifi cation did not a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doajarticles::c4e09741b70e0930e32b9be2a2b34eea