Zobrazeno 1 - 10
of 82
pro vyhledávání: '"Marcin Podsiadło"'
Autor:
Natalia Sacharczuk, Anna Olejniczak, Maciej Bujak, Kamil Filip Dziubek, Andrzej Katrusiak, Marcin Podsiadło
Publikováno v:
IUCrJ, Vol 11, Iss 1, Pp 57-61 (2024)
The structures of the simplest symmetric primary ethers [(CnH2n+1)2O, n = 1–3] determined under high pressure revealed their conformational preferences and intermolecular interactions. In three new polymorphs of diethyl ether (C2H5)2O, high pressur
Externí odkaz:
https://doaj.org/article/a45eb8f8b9294e858820504a438c369f
Autor:
Grzegorz Mazurek, Przemysław Buczyński, Marek Iwański, Marcin Podsiadło, Przemysław Pypeć, Artur Kowalczyk
Publikováno v:
Materials, Vol 16, Iss 23, p 7271 (2023)
This paper analyses the key findings of a study devoted to PET-modified bitumen. The research program was run according to the D-optimal experimental plan based on a factorial design. Five factors, i.e., the type of polymer (source), the type of bitu
Externí odkaz:
https://doaj.org/article/b42409f7a74c479fadc0d7f693679536
Publikováno v:
IUCrJ, Vol 9, Iss 1, Pp 49-54 (2022)
Partial hydration of organic compounds can be achieved by high-pressure crystallization. This has been demonstrated for the high-nitrogen-content compound 6-chloro-1,2,3,4-tetrazolo[1,5-b]pyridazine (C4H2N5Cl), which becomes partly hydrated by isocho
Externí odkaz:
https://doaj.org/article/1b154cf72bb44a09b962044cfb4582cc
Autor:
Annamária Naughton-Duszová, Lukasz Marciniak, Aleksandra Dubiel, Jolanta Laszkiewicz-Łukasik, Karolina Kniec, Marcin Podsiadło
Publikováno v:
Processing and Application of Ceramics, Vol 14, Iss 3, Pp 181-187 (2020)
The effect of the addition of Cr3+/Nd3+ doped Al2O3 nanoparticles (Al2O3 co-doped with 1% Cr3+ and 1% Nd3+ ions) on the mechanical and luminescent properties of ZrB2 ceramic composites was investigated. ZrB2 based composites with addition of 8, 16 an
Externí odkaz:
https://doaj.org/article/aa2b5b8885db4f1d93c67fe9510943e9
Publikováno v:
Materials, Vol 16, Iss 1, p 439 (2023)
The effect of zirconium diboride (ZrB2) and titanium diboride (TiB2) on the microstructure as well as the physical, mechanical, and tribological properties of composites based on 316 L steel is presented. Each reinforcing phase was added to the base
Externí odkaz:
https://doaj.org/article/512a4724b9f048c995db81ab04726775
Publikováno v:
Materials, Vol 14, Iss 20, p 5925 (2021)
The deformation of the cold recycled mixture with foamed bitumen in a recycled base with an innovative three-component road binder and foamed bitumen is analysed. Numerical simulation results for the pavement constructed, based on laboratory test res
Externí odkaz:
https://doaj.org/article/d545d99f0f2d4915898bc1a31032a967
Publikováno v:
Materials, Vol 14, Iss 14, p 3812 (2021)
Titanium diboride (TiB2) is a hard, refractory material, attractive for a number of applications, including wear-resistant machine parts and tools, but it is difficult to densify. The spark plasma sintering (SPS) method allows producing TiB2-based co
Externí odkaz:
https://doaj.org/article/c18e4a24367d4d569be360e55ebbafea
Publikováno v:
Materials, Vol 14, Iss 14, p 4056 (2021)
The aim of this study was to carry out the consolidation of zirconium diboride-reinforced composites using the SPS technique. The effect of the adopted method of powder mixture preparation (mixing in Turbula or milling in a planetary mill) and of the
Externí odkaz:
https://doaj.org/article/091fe800b0204a29b32759fda9971f77
Autor:
Lucyna Jaworska, Tomasz Skrzekut, Michał Stępień, Paweł Pałka, Grzegorz Boczkal, Adam Zwoliński, Piotr Noga, Marcin Podsiadło, Radosław Wnuk, Paweł Ostachowski
Publikováno v:
Materials, Vol 14, Iss 12, p 3172 (2021)
Materials were obtained from commercial zirconium powders. 1 mass%, 2.5 mass% and 16 mass% of niobium powders were used as the reinforcing phase. The SPS method and the extrusion method classified as the SPD method were used. Relative density materia
Externí odkaz:
https://doaj.org/article/70f19bf8b2da4e5b99ec263877a53487
Autor:
Tomasz Skrzekut, Grzegorz Boczkal, Adam Zwoliński, Piotr Noga, Lucyna Jaworska, Paweł Pałka, Marcin Podsiadło
Publikováno v:
Materials, Vol 14, Iss 13, p 3560 (2021)
Zr-2.5Cu and Zr-10Cu powder mixtures were consolidated in the extrusion process and using the spark plasma sintering technique. In these studies, material tests were carried out in the fields of phase composition, microstructure, hardness and tensile
Externí odkaz:
https://doaj.org/article/7d4f187c0e484c75834451332e7f09c2