Zobrazeno 1 - 10
of 90
pro vyhledávání: '"Manuel Carsí"'
Autor:
Gerardo Conejero Ortega, Nuria Candela Vázquez, Montserrat Pichel Martínez, Rafael Barea Del Cerro, Manuel Carsí Cebrián
Publikováno v:
Revista de Metalurgia, Vol 50, Iss 3, Pp e018-e018 (2014)
Se ha estudiado la influencia de la transformación de austenita a martensita en la estabilidad dimensional de un acero experimental para herramientas aleado con niobio (0,08% en peso) y vanadio (0,12% en peso). La estabilidad dimensional del acero e
Externí odkaz:
https://doaj.org/article/21bba99f7e4c4e4aaf17a2f2ab59e005
Publikováno v:
Revista de Metalurgia, Vol 46, Iss Extra, Pp 5-5 (2010)
Externí odkaz:
https://doaj.org/article/efa4c39620ef4b29b50259878b95a33b
Autor:
Maria Isabel Alonso, Manuel Carsí
The filtration performance of three types of commercially available face masks (hygienic, surgical, and FFP2) has been evaluated for aerosol particle size in the range 10–150 nm at a fixed face velocity of 9.5 cm/s. Two parameters have been varied
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::baf3b404cbff34d9bbd28670c0ec95cb
http://hdl.handle.net/10261/287616
http://hdl.handle.net/10261/287616
Publikováno v:
Digital.CSIC. Repositorio Institucional del CSIC
instname
instname
A modified iron-based superalloy is studied regarding its hot formability. The microstructure contained particles of titanium carbides, carbonitrides and nitrates. Torsion tests at high strain rate at temperatures ranging from 800 to 1200°C were con
Publikováno v:
Digital.CSIC. Repositorio Institucional del CSIC
instname
instname
The hot working behavior of a 38Ni-21Cr based superalloy was studied. Torsion tests at strain rates between 2 and 20 s-1and temperatures between 1123 and 1473 K were conducted. A fine microstructure of about 6-10 lm grain size and small TiC particles
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::332ade150b5f8e2243aec0cdb73e352f
http://hdl.handle.net/10261/230855
http://hdl.handle.net/10261/230855
Publikováno v:
Digital.CSIC. Repositorio Institucional del CSIC
instname
instname
In the present work, a new stability criterion is presented that uses the single sine hyperbolic equation of Garofalo for all values of the thermomechanical variables of the hot-working process. In this procedure, the efficiency and stability are cal
Autor:
Manuel Carsí, Maria Isabel Alonso
Publikováno v:
Digital.CSIC. Repositorio Institucional del CSIC
instname
instname
Bipolar charging and neutralization of aerosol particles below 100 nm in a laminar flow tube with a uniform generation rate of mass- and mobility-distributed heterogeneous ions has been studied theoretically, and compared to the case of homogeneous,
Publikováno v:
Digital.CSIC. Repositorio Institucional del CSIC
instname
instname
The modeling of the forming of materials at high homologous temperatures allows obtaining optimum forming parameters, reduced costs and improving final properties of the finished product. In this work, the behavior of the ZK30 Magnesium alloy was cha
Publikováno v:
Digital.CSIC. Repositorio Institucional del CSIC
instname
instname
Ductility is the property of a given material to deform without fracture. In other words, is the capacity to maintain a structural stability under stresses. It is an important property that is difficult to predict since many microstructural and exper