Zobrazeno 1 - 10
of 113
pro vyhledávání: '"Manojit Ghosh"'
Publikováno v:
Journal of Alloys and Metallurgical Systems, Vol 7, Iss , Pp 100087- (2024)
This study aims to predict the various phases present in high entropy alloys (HEAs) and consequently classify their crystal structure employing multiple machine learning (ML) algorithms utilizing five thermodynamic, electronic and configurational par
Externí odkaz:
https://doaj.org/article/5fbc97de4aee416e874afc030eb2e632
Autor:
Shayani Roy, Pritam Mandal, Amitava Chowdhury, M. Abdullah-Al-Wadud, Ariyan H. Seikh, Ayan H. Seikh, Manojit Ghosh, Ananya Mukhopadhyay
Publikováno v:
IEEE Access, Vol 12, Pp 60482-60495 (2024)
A river tries to maintain a dynamic equilibrium state by adjusting different controlling factors. A significant change in one of the controlling factors will dictate modifications in the others to re-establish the equilibrium in a river system. A riv
Externí odkaz:
https://doaj.org/article/d99a12ea6c46498a82314fbc1c747ff6
Autor:
Pariya Solgi, Mojtaba Chenarani, Ali Reza Eivani, Manojit Ghosh, Vidyapati Kumar, Hamid Reza Jafarian
Publikováno v:
Journal of Materials Research and Technology, Vol 26, Iss , Pp 865-895 (2023)
The “heat checking” phenomenon, which occurs due to thermal fatigue, is one of the dominant mechanisms in shortening the lifetime of dies which undergo sequential in-service high- and low-temperature operating cycles. This phenomenon results in t
Externí odkaz:
https://doaj.org/article/9cdcd23b9be84e2a9c8e31b4693d6745
Autor:
Pushpak Banerjee, Avinava Roy, Soumyadeep Sen, Arkajit Ghosh, Gourab Saha, Asiful H. Seikh, Ibrahim A. Alnaser, Manojit Ghosh
Publikováno v:
Heliyon, Vol 9, Iss 5, Pp e16107- (2023)
Countless research has suggested Yttria-stabilized Zirconia (YSZ) to be a top candidate for being implemented as thermal barrier coatings (TBC). However, when exposed to prolonged service, temperature and stress variations succeed in initiating a cat
Externí odkaz:
https://doaj.org/article/084ae2d11849436c999f8b467aaec9cf
Publikováno v:
Journal of Materials Research and Technology, Vol 14, Iss , Pp 507-520 (2021)
In this paper, the hot deformation behavior of Zn–22Al alloy was investigated by performing hot compression tests under different deformation conditions. The Arrhenius-type constitutive model was developed and the constants were determined for this
Externí odkaz:
https://doaj.org/article/089b2b0f1e9c4a53a47ee1a635c9f5ce
Publikováno v:
Journal of Materials Research and Technology, Vol 14, Iss , Pp 2428-2440 (2021)
In this research, the effects of annealing temperature (500, 550, and 600 °C) on the microstructure and mechanical properties of a conventionally (1 cycle) and severely (6 cycles) deformed Fe–24Ni martensitic steel, processed by accumulative roll
Externí odkaz:
https://doaj.org/article/28dea90b4e804f2da39fa0235fc9666e
Autor:
Arpita Chatterjee, Soumyadeep Sen, Subhodeep Paul, Pallab Roy, Asiful H. Seikh, Ibrahim A. Alnaser, Kalyan Das, Goutam Sutradhar, Manojit Ghosh
Publikováno v:
Metals, Vol 13, Iss 3, p 584 (2023)
The wear debris from conventional brake pads is a growing source of environmental contamination that often leads to life-threatening diseases for human beings. Though the emerging organic brake pads show potential to serve as an eco-friendly alternat
Externí odkaz:
https://doaj.org/article/e3290ae2139b4322a5030857bf7eb945
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 5, Pp 9620-9631 (2020)
Monte Carlo (MC) simulation was used to predict the microstructural evolution and the kinetics of grain growth during heating of Zn–22Al dual phase alloy. As the prediction of MC simulation is based on virtual simulation time, time conversion plays
Externí odkaz:
https://doaj.org/article/7e6f7a7183694096bc6ba8e6d5371a1f
Autor:
Partha Pratim Dey, Pranabananda Modak, P.S. Banerjee, Debalay Chakrabarti, Asiful H. Seikh, Hany S. Abdo, Monis Luqman, Manojit Ghosh
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 3, Pp 4788-4805 (2020)
Interstitial-free (IF) steel specimens were coated by hot-dip aluminizing process bearing bath composition as Al-6.9% Si-1.4% Mg and bath temperature at 800 °C. Dipping time varied for 0.5, 1, 3 and 6 min. The objective of the present study is to co
Externí odkaz:
https://doaj.org/article/ddcab7dc119a41abb9c95741e0bb7a37
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 1, Pp 1-12 (2020)
Optical microscope (OM), field emission scanning electron microscope (FESEM), energy dispersive X-ray Spectroscopy (EDS), transmission electron microscope (TEM) differential scanning calorimetry (DSC) and X-ray diffraction (XRD) were employed to inve
Externí odkaz:
https://doaj.org/article/14ce12f58fa740549710696ca30f3ebf