Zobrazeno 1 - 10
of 86
pro vyhledávání: '"Manja Kitek-Kuzman"'
Publikováno v:
Drvna Industrija, Vol 75, Iss 3, Pp 371-380 (2024)
The use of artificial intelligence (AI) in various fields has attracted a lot of attention in the past year, especially after the release of ChatGPT, a freely available intelligent online system. Several advanced software solutions that incorporate A
Externí odkaz:
https://doaj.org/article/aa5b62287e2b4453a71280f64106a5d9
Publikováno v:
Drvna Industrija, Vol 72, Iss 4, Pp 381-388 (2021)
The influence of artificial ageing on bonded heat-treated spruce lamellas was investigated. Heat-treated spruce lamellas with different degrees of thermal modification were bonded with PVAc and MUF and then exposed to 500 artificial weathering cycles
Externí odkaz:
https://doaj.org/article/16c77859329b46d6bc0cf9cc1236b111
Publikováno v:
Igra Ustvarjalnosti, Vol 7, Iss 7, Pp 60-67 (2019)
Organic, flowing natural forms have always been the inspiration for creating a built environment. Nature has developed the forms of organisms and their processes in terms of maximum optimization. Organic architecture is based on studies of forms in n
Externí odkaz:
https://doaj.org/article/a994ef1411cc404d96ae42387e53a0a3
Publikováno v:
Drvna industrija
Volume 74
Issue 1
Drvna industrija. Znanstveno stručni časopis za pitanja drvne tehnologije, vol. 74, no. 1, pp. 3-11, 2023.
Volume 74
Issue 1
Drvna industrija. Znanstveno stručni časopis za pitanja drvne tehnologije, vol. 74, no. 1, pp. 3-11, 2023.
This paper investigated the bending moment of chair base joints. The ultimate bending moments (maximum moment), calculated on the base of the measured maximum applied loads (maximum force), were compared for the front leg and rear leg joints of a cha
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::2b58158f56f08ed8bf9d8df9bc2333ef
https://doi.org/10.5552/drvind.2023.0004
https://doi.org/10.5552/drvind.2023.0004
Publikováno v:
Pro Ligno, Vol 14, Iss 4, Pp 52-56 (2018)
Nails represent the easiest and most common method to connect timber members, but, since joints and connections frequently represent the weakest points in timber structures, they need special attention. The embedment strength of nails is one of the
Externí odkaz:
https://doaj.org/article/69d618dc98d040e98e3eef61045ecf96
Autor:
Marija Miloshevska Janakieska, Martina Zbašnik-Senegačnik, Kiril Gramatikov, Manja Kitek Kuzman
Publikováno v:
Igra Ustvarjalnosti, Vol 6, Iss 6, Pp 58-65 (2018)
Living comfort in the architecture is described as a state of physical easiness, freedom, pleasant lifestyle, a relief from the stress and the well-being of the building`s users. Glass positively affects the living comfort, because it provides natura
Externí odkaz:
https://doaj.org/article/b3f49f7f0c0b48ec8d7b76369751ad88
Publikováno v:
Wood material science & engineering, vol. 18, no. 3, 2023.
Wood material science & engineering, str., Vol., no. , 2022
COBISS-ID: 522172953
Wood material science & engineering, str.
COBISS-ID: 522172953
In this study, 3D-printed connectors to replace the typical L-shaped joints in the construction of a chair were developed, tested and numerically analysed. Different connectors were designed and manufactured with a fused deposition modelling (FDM) 3D
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::80afb518efddff4907e815061a36cbf7
https://doi.org/10.1080/17480272.2022.2086065
https://doi.org/10.1080/17480272.2022.2086065
Publikováno v:
Drvna Industrija, Vol 67, Iss 3, Pp 289-298 (2016)
Eco-innovation is crucial to Europe’s economic competitiveness; environment-friendly technologies have a positive impact on businesses and contribute to job creation. A survey of perceptions and attitudes about eco-innovation and eco-design among 7
Externí odkaz:
https://doaj.org/article/8457933934464cae9576e1cc95a6cb00
Autor:
Nadir Ayrilmis, Manja Kitek Kuzman
Publikováno v:
BioResources, Vol 11, Iss 3, Pp 7803-7810 (2016)
In this study, 4-mm-thick medium-density fiberboard (MDF) panels were heat-treated at 140 °C for 30 or 60 min and at 180 °C for 30 or 60 min. Then, 10-mm-thick lightweight honeycomb paperboards made from kraft paper (130 g/m2, cell diameter of hone
Externí odkaz:
https://doaj.org/article/ba6a535773ad4c5db25b16f1b2c4fce1
Autor:
Ismail Ezzaraa, Nadir Ayrilmis, Mohamed Abouelmajd, Manja Kitek Kuzman, Ahmed Bahlaoui, Ismail Arroub, Jamaa Bengourram, Manuel Lagache, Soufiane Belhouideg
Publikováno v:
Forests; Volume 14; Issue 1; Pages: 95
Wood-polymer composites are increasingly produced through fused deposition modeling (FDM)—an additive manufacturing technique. The versatility of this technology has attracted several industries to print complex shapes and structures. This undersco
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::1c6d12ea5b84d9d3ec0a8b2b80a7a486