Zobrazeno 1 - 10
of 36
pro vyhledávání: '"Magnus Hörnqvist Colliander"'
Autor:
Gudrun Lotze, Anand H. S. Iyer, Olof Bäcke, Sebastian Kalbfleisch, Magnus Hörnqvist Colliander
Publikováno v:
Journal of Synchrotron Radiation, Vol 31, Iss 5, Pp 1409-1413 (2024)
Errors in variable subscripts, equations and Fig. 8 in Section 3.2 of the article by Lotze et al. [(2024). J. Synchrotron Rad. 31, 42–52] are corrected.
Externí odkaz:
https://doaj.org/article/ff9bc3afeba84f9fa3bea9a068eabd68
Publikováno v:
Metals, Vol 13, Iss 8, p 1335 (2023)
Forging on an industrial scale often involves slow, size-limited cooling rates or high temperature hold times between, or after, deformation. This enables the dynamic recrystallization (DRX) initiated during forging to further progress under static c
Externí odkaz:
https://doaj.org/article/13cee6e009d24d1d9e1fddef12881864
Publikováno v:
Materials & Design, Vol 209, Iss , Pp 109954- (2021)
In-situ neutron diffraction was performed during tensile deformation of a Ni-based superalloy, Haynes 282, at 20, 100 and 300 K. Two distinct uni-modal microstructures with fine (20 nm) and coarse (200 nm) γ′ particles were investigated. On the ma
Externí odkaz:
https://doaj.org/article/cbbe5312d2c44e538b1f8ad4b60d8c73
Publikováno v:
Metals, Vol 11, Iss 1, p 122 (2021)
Thermomechanical processes, such as forging, are important steps during manufacturing of superalloy components. The microstructural development during processing, which controls the final component properties, is complex and depends on e.g., applied
Externí odkaz:
https://doaj.org/article/d98e6787dabc4bc09e01d4f59685920b
Publikováno v:
Philosophical Magazine Letters. 101:30-39
Cooling-induced precipitation of the strengthening γ’ phase is commonly investigated in Ni-base superalloys with a high γ’ volume fraction, where it is used to control the final microstructure and ...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::54a9c61243974f8cf360c72fe95bf4f0
https://doi.org/10.1080/09500839.2020.1841314
https://doi.org/10.1080/09500839.2020.1841314
Publikováno v:
Materials Science and Engineering: A. 865:144583
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3b2528638d6fce85b7eb87e8af82c18e
https://doi.org/10.1016/j.msea.2023.144583
https://doi.org/10.1016/j.msea.2023.144583
Autor:
Mariana Verezhak, Klaus Wakonig, Angel Rodriguez-Fernandez, Anand Harihara Subramonia Iyer, Dina Carbone, Magnus Hörnqvist Colliander, Ana Diaz
Publikováno v:
Physical Review Letters. 127
Dynamical diffraction effects in thin single crystals produce highly monochromatic parallel x-ray beams with a mutual separation of a few microns and a time delay of a few femtoseconds-the so-called echoes. This ultrafast diffraction effect is used a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b286987449f374cf0c78082d180e54af
https://doi.org/10.1103/physrevlett.127.157402
https://doi.org/10.1103/physrevlett.127.157402
Publikováno v:
Materials Science and Engineering: A. 849:143387
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8f18b4f4e57762886537193d746468b6
https://doi.org/10.1016/j.msea.2022.143387
https://doi.org/10.1016/j.msea.2022.143387
Publikováno v:
Metals
Volume 11
Issue 1
Metals, Vol 11, Iss 122, p 122 (2021)
Volume 11
Issue 1
Metals, Vol 11, Iss 122, p 122 (2021)
Thermomechanical processes, such as forging, are important steps during manufacturing of superalloy components. The microstructural development during processing, which controls the final component properties, is complex and depends on e.g., applied
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::c5914c0e79c21dd406d343b1c8d7671d
Autor:
Leif Asp, Shanghong Duan, David Carlstedt, Fang Liu, Florian Rittweger, Andrew Sharits, David Mollenhauer, Karl-Ragmar Riemschneider, Magnus Hörnqvist Colliander, Anand Harihara Subramonia Iyer, Calvin Maddox
Publikováno v:
Carbon (0008-6223) vol.185(2021)
Carbon fibre electrodes can enable a solid-state battery to carry mechanical load as normal construction materials. The multifunctionality is promising for most lightweight applications. Like all electrode materials, both volume and elastic moduli of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8e4de6706738233b12328223fd1d87f8
https://research.chalmers.se/en/publication/c8d8d9c4-21f4-480f-a1b4-703de0329153
https://research.chalmers.se/en/publication/c8d8d9c4-21f4-480f-a1b4-703de0329153
