Zobrazeno 1 - 10
of 19
pro vyhledávání: '"Magdalena Pastor"'
Publikováno v:
Materials, Vol 14, Iss 18, p 5459 (2021)
Fused Filament Fabrication (FFF) is one of the most extensive additive manufacturing technologies for printing prototypes or final parts in various fields. Some printed parts need to meet structural requirements to be functional parts. Therefore, it
Externí odkaz:
https://doaj.org/article/5007f0e92844455bb60c30ef879ac281
Autor:
Ali Bagheri, Irene Buj-Corral, Miquel Ferrer Ballester, Maria Magdalena Pastor, Francesc Roure Fernandez
Publikováno v:
Materials, Vol 11, Iss 12, p 2420 (2018)
In tissue engineering, scaffolds can be obtained by means of 3D printing. Different structures are used in order to reduce the stiffness of the solid material. The present article analyzes the mechanical behavior of octet-truss microstructures. Three
Externí odkaz:
https://doaj.org/article/f637638b03cb45aaaca1cf31e7bbbe07
Publikováno v:
In Thin-Walled Structures 2011 49(8):933-946
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Autor:
Francisco Roure Fernández, Jordi Bonada Bo, María Magdalena Pastor Artigues, Miguel Casafont Ribera
Publikováno v:
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
Universitat Politècnica de Catalunya (UPC)
Thin-walled open cross-sections are commonly used in steel storage pallet rack structures. In some cases, open sections are employed as beam members. These beam members usually have weld spots along their length in order to reduce the distortional de
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::4dcfecce5e965ee51de66634ae06b3b9
https://hdl.handle.net/2117/353489
https://hdl.handle.net/2117/353489
Autor:
Elsa Pérez-Guindal, Ma-Magdalena Pastor-Artigues, Jordi Bonada-Bo, Irene Buj-Corral, Xavier Ayneto-Gubert, Francesc Roure-Fernández
Publikováno v:
Recercat. Dipósit de la Recerca de Catalunya
instname
Materials
Volume 13
Issue 1
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
instname
Materials
Volume 13
Issue 1
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
The objective of this research is to characterise the material poly lactic acid (PLA), printed by fused deposition modelling (FDM) technology, under three loading conditions&mdash
tension, compression and bending&mdash
in order to get data
tension, compression and bending&mdash
in order to get data
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Autor:
Antonio Susín Sánchez, María Magdalena Pastor Artigues, Jordi Bonada Bo, Francisco Roure Fernández, Miguel Casafont Ribera
Publikováno v:
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
Recercat. Dipósit de la Recerca de Catalunya
instname
Universitat Politècnica de Catalunya (UPC)
Recercat. Dipósit de la Recerca de Catalunya
instname
The investigation attempts to adapt a be am finite element procedure based on the Generalised Beam Theory (GBT) to the analysis of perforated columns. The presence of perforations is taken into account through the use of two beam elements with differ
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::44607b36c57ca7dac6b2889ba2191fe2
Publikováno v:
Proceedings of the Institution of Civil Engineers - Structures and Buildings. 166:392-402
An investigation into the test method for distortional buckling of steel storage rack columns is presented. The main problem of the experimental method is to determine the length of the samples to be tested. The paper proposes to solve this problem b