Zobrazeno 1 - 10
of 20
pro vyhledávání: '"Madyshev, Ilnur N."'
Autor:
Zinurov Vadim E., Dmitriev Andrey V., Badretdinova Guzel R., Bikkulov Rustem Ya., Madyshev Ilnur N.
Publikováno v:
MATEC Web of Conferences, Vol 329, p 03035 (2020)
In order to increase the efficiency of gas purification from the particles of up to 20 microns and to increase the service life of bag and electrostatic filters, the authors propose to use a centrifugal separation device with coaxially arranged pipes
Externí odkaz:
https://doaj.org/article/2b26d92566394e9d9ec4b7e52868810f
Publikováno v:
MATEC Web of Conferences, Vol 315, p 03002 (2020)
The design of cooling tower`s filler unit, consisting of inclined-corrugated contact elements, and made of polymer material, is developed and described in this research paper. The experimental studies were conducted to determine the efficiency of coo
Externí odkaz:
https://doaj.org/article/139b367b93f04bce88ff4b45c2a4e646
Publikováno v:
MATEC Web of Conferences, Vol 298, p 00026 (2019)
Theoretical aspects and experience of using the mathematical modeling and computerized simulation technology for solving the problems of installation and repair of process equipment of chemical and petrochemical industries are considered in this scie
Externí odkaz:
https://doaj.org/article/741a883d33d74274bbe8057872d8c93b
Publikováno v:
MATEC Web of Conferences, Vol 224, p 02079 (2018)
Researches of blocks of sprinklers of cooling towers with jet-film devices are presented. The conducted numerical studies allow us to estimate the influence of the design and operating parameters of the proposed contact device on the efficiency of th
Externí odkaz:
https://doaj.org/article/b6e3120ec9f149ec9c7a1c12b070f2cb
Publikováno v:
MATEC Web of Conferences, Vol 194, p 01036 (2018)
Jet-film contact devices with special design elements for intensification of heat-mass transfer processes are proposed. An experimental apparatus has been created in order to study the interaction of water and air flows within these devices. It has b
Externí odkaz:
https://doaj.org/article/c89448fa13434aa8bb18aa0ce1db6155
Publikováno v:
MATEC Web of Conferences, Vol 194, p 01013 (2018)
One of the ways of intensifying the heat and mass transfer processes in gas-fluid systems is designing jet-film contact devices with a developed surface of phase contact at high flow velocities. A contact jet-film device has been developed. The resul
Externí odkaz:
https://doaj.org/article/e917e038b52f4554b9479d3adf2cb304
Publikováno v:
MATEC Web of Conferences, Vol 91, p 01019 (2017)
A jet-bubble contact device is designed to enhance the operation efficiency of heat and mass exchange units. New devices should be introduced for the contact of gas and liquid, which can provide the minimum entrainment of liquid by the gas flow and h
Externí odkaz:
https://doaj.org/article/9743e5c159764bc099e1c48db405be00
Publikováno v:
MATEC Web of Conferences, Vol 95, p 15008 (2017)
The main cause of the transformers failure when thermal overload, is the inter-turn short circuit inside of the winding. Therefore, the additional cooling system for the oil-immersed transformers developed, which are able to reduce the peak load and
Externí odkaz:
https://doaj.org/article/6904a6d62c974405a0e04ecccb839765
Publikováno v:
MATEC Web of Conferences, Vol 141, p 01023 (2017)
One of the methods of solving the problem of improvement of heat-mass efficiency of thermal deaerators of TPSs is application of jet-film contact devices for interaction of vapor and liquid flows. The design of these devices has been studied. Estimat
Externí odkaz:
https://doaj.org/article/e16cfd5a35aa4834b88fe9a333bd103a
Publikováno v:
MATEC Web of Conferences, Vol 129, p 06010 (2017)
For the purpose of increase in efficiency and performance of the heat-and-mass transfer processes, the design of jet-film contact device has been developed. The advantage of this device is a low hydraulic resistance, high mass-transfer efficiency wit
Externí odkaz:
https://doaj.org/article/a885d1193115474ab87356adfbd4ba84