Zobrazeno 1 - 8
of 8
pro vyhledávání: '"M.Z.Shah Khan"'
Publikováno v:
Materials Letters. 52:173-179
This paper reports on the work carried out on two resins, which served as matrices in glass fibre-reinforced composite structural materials for naval ship construction. In generic terms, these are called polyester and vinylester. Specimens were subje
Autor:
G Simpson, M.Z.Shah Khan
Publikováno v:
Materials Letters. 45:167-174
This paper reports on the mechanical behaviour of a ship structure composite, reinforced by glass fibres of type DF1400, under increasing compressive strain rates ranging from 0.001 to 10 s −1 . The constituents of the composites (reinforcing glass
Publikováno v:
Composites Science and Technology. 60:23-32
The non-destructive evaluation (NDE) of fatigue damage in thick polymer composites used in large ships is examined by the use of low-frequency pulse-echo ultrasonics. The initiation and growth of fatigue-induced damage was monitored with ultrasonics
Publikováno v:
Composites Part A: Applied Science and Manufacturing. 31:57-67
There has been a significant increase in the use of glass reinforced polymeric (GRP) composites as structural materials in naval mine countermeasure surface ships. Sea mines when detonated emit underwater shock waves, which could impart severe loadin
Publikováno v:
Composite Structures. 42:107-118
This paper investigates the effects of interfacial crack size and impact damage size on the shear properties and failure mechanisms of a typical marine sandwich composite made from glass reinforced polymer (GRP) skins and a poly(vinyl chloride) (PVC)
Publikováno v:
Experimental Mechanics. 37:264-271
The measurement of weld-induced residual stress is important in structures that are subjected to cyclic loading during their service life. Depending on their magnitude, stresses can influence the rate of crack growth under cyclic loading and hence af
Autor:
M.Z.Shah Khan, Adrian P. Mouritz
Publikováno v:
Composites Science and Technology. 56:695-701
This paper examines the effect of through-thickness stitching on the in-plane fatigue performance and fatigue damage mechanisms of a glass-reinforced polymer (GRP) laminate under zero-to-tension cyclic loading. The influence of stitching orientation
Autor:
K. R. L. Thompson, M.Z.Shah Khan
Publikováno v:
Metallurgical Transactions A. 18:1951-1960
This paper describes a study carried out at room temperature on an Fe-21 pct Cr-11 pct Ni heat resisting alloy under tensile and fatigue deformation. Specific microstructures were developed by heat treating the as-received alloy at different temperat