Zobrazeno 1 - 10
of 21
pro vyhledávání: '"M. S. Prozorova"'
Publikováno v:
Key Engineering Materials. 753:117-122
Thermal-sprayed alumina–titania coatings (Al2O3:Ti wt ratio = 60:40) were prepared by a new multi-chamber gas-dynamic accelerator. The coatings were examined by using scanning electron microscopy, X-ray phase analysis and Vickers hardness tester at
Autor:
I P, Shilovskii, M S, Prozorova, A R, Gaisina, A A, Laskin, V V, Smirnov, A A, Babakhin, M R, Khaitov
Publikováno v:
Eksperimental'naia i klinicheskaia farmakologiia. 79(4)
Asthma is among the most common chronic disorders of airways, which affects both children and adults. Asthma being a common disease among different segments of population, it has a high mortality rate and, in the absence of appropriate care, affects
Autor:
M. N. Yapryntsev, M. S. Prozorova, N. Vasilik, M. Arseenko, Marina Kovaleva, Yu. N. Tyurin, V. V. Sirota, O.V. Kolisnichenko, I.A. Pavlenko
Publikováno v:
Ceramics International. 41:15067-15074
Due to its superior sliding, erosive and abrasive wear properties WC–Co–Cr coatings are used in the coating industry. A series of WC–10Co–4Cr coatings (80–375 μm thick) have been prepared on a corrosion-resistant steel substrate with a new
Autor:
M. S. Prozorova, N. Vasilik, M. Arseenko, Yu. N. Tyurin, V. V. Sirota, Marina Kovaleva, O.V. Kolisnichenko, I.A. Pavlenko
Publikováno v:
Physics Research International. 2015:1-8
A series of titanium-based coatings (50–550 μm thick) on an aluminium substrate was deposited via multichamber detonation sprayer with different barrel lengths (300, 400, and 500, all in mm). The titanium-based coatings obtained in these three exp
Autor:
M. N. Yapryntsev, O. N. Vagina, Maria Arseenko, O.V. Kolisnichenko, Vseslav Novikov, M. S. Prozorova, V. V. Sirota, Yuri Tyurin, Marina Kovaleva
Publikováno v:
Coatings; Volume 7; Issue 9; Pages: 142
Coatings, Vol 7, Iss 9, p 142 (2017)
Coatings, Vol 7, Iss 9, p 142 (2017)
In this work, dense zircon-based ceramic coatings were obtained from inexpensive zircon powder on a steel substrate by using a new multi-chamber gas-dynamic accelerator. The microstructure and phase composition of the coating were characterized by sc
Autor:
N. Vasilik, M. S. Prozorova, V. V. Sirota, Marina Kovaleva, M. Arseenko, O.V. Kolisnichenko, I.A. Pavlenko, Yu. N. Tyurin
Publikováno v:
Journal of Thermal Spray Technology. 23:1199-1209
Nanostructural Al2O3 coatings were formed on a steel substrate surface using a multichamber detonation sprayer. The Al2O3 coatings were characterized by a dense microstructure with porosity below 1% and hardness of 1300 ± 25 HV0.3. The transition la
Publikováno v:
Russian Metallurgy (Metally). 2014:275-278
The strength of the Al2O3 powder coating formed by a cumulative detonation method on a steel St3 substrate is determined, and its structure is studied. The optimum conditions for deposition are chosen. They make it possible to form a dense high-stren
Autor:
E. Danshina, N. Vasilik, Marina Kovaleva, M. Arseenko, Yu. N. Tyurin, M. S. Prozorova, O.V. Kolisnichenko
Publikováno v:
Surface and Coatings Technology. 232:719-725
A series of Al2O3 coatings have been prepared on steel substrate by multi-chamber gas-dynamic accelerator. The coatings (200 μm thick) were deposited in 6 passes in the three modes at different nozzle lengths (300, 400, 500 mm) of multi-chamber gas-
Publikováno v:
Journal of Thermal Spray Technology. 22:518-524
Titanium-based coatings were deposited on aluminum samples using cumulative-detonation equipment. The gas mixture consumption (propane-oxygen-air) was up to 5 m3 per 1 kg of powder. The titanium-based coatings were examined by scanning electron micro
Autor:
A. D. Pogrebnyak, V. M. Beresnev, A. P. Shypylenko, D. A. Kolesnikov, Keiji Oyoshi, O.V. Kolisnichenko, Hideyuki Murakami, M. S. Prozorova, Yoshihiko Takeda, A. Sh. Kaverina
Publikováno v:
Technical Physics Letters. 39:189-192
Hard micro- and nanostructured Ti-Hf-Si-N/NbN/Al2O3 multilayer coatings on steel substrates have been obtained for the first time using various deposition technologies and characterized by a combination of methods. It is established that the proposed