Zobrazeno 1 - 10
of 18
pro vyhledávání: '"M. H. Hosni"'
Publikováno v:
1996 Annual Conference Proceedings.
Publikováno v:
Transactions of the ASAE. 42:1811-1822
A macroscopic model (Nazaroff and Cass, 1989) was used to predict dust concentration distribution in a mechanically ventilated swine nursery room under isothermal flow conditions. Four particle diameter size ranges, 0.5 to 0.9, 0.9 to 1.6, 1.6 to 2.8
Publikováno v:
Transactions of the ASAE. 42:1823-1832
Experimental and numerical modeling were conducted to determine the dust concentration distribution in a simulated, mechanically ventilated, swine nursery room under non-isothermal conditions. Effects of dust generation rate, temperature difference b
Publikováno v:
Applied Engineering in Agriculture. 12:237-242
This article presents results of performance tests of new passive automatic ceiling and wall inlets for livestock buildings. A ceiling inlet with a round insulated baffle and a wall inlet with a rectangular insulated baffle were assessed for their ab
Publikováno v:
International Journal of Heat and Mass Transfer. 36:141-146
The work reported here was motivated by concern over the use of smooth heat flux gages for heat transfer measurements on the otherwise rough turbine blades. Stanton number distributions and boundary layer profiles of mean temperature, mean velocity,
Publikováno v:
International Journal of Heat and Mass Transfer. 36:147-153
Stanton number and skin friction coefficient results are presented for zero pressure gradient incompressible turbulent boundary layer air flows over two rough surfacescomposed of 1.27 mm base diameter by 0.635 mm high truncated cones spaced in stagge
Publikováno v:
Wärme- und Stoffübertragung. 27:131-140
Measurements and predictions are presented which investigate the effects of thermal boundary condition on heat transfer in the turbulent rough-wall boundary layer. Stanton number measurements are reported for the turbulent flow of air over rough plat
Publikováno v:
Journal of Thermophysics and Heat Transfer. 6:84-90
Stanton number measurements are presented for the turbulent boundary layer flow of air on rough-wall flat plates with both constant wall temperature and step wall temperature boundary conditions. Two rough surfaces were used—one roughened with hemi
Publikováno v:
Experimental Thermal and Fluid Science. 4:673-683
The application of detailed uncertainty analysis techniques in the debugging and qualification checks of a new turbulent heat transfer test facility is demonstrated. The data reduction equation for Stanton number is developed, and the associated unce
Publikováno v:
Journal of Turbomachinery. 113:404-411
Experimental data on a rough surface for both transitionally rough and fully rough turbulent flow regimes are presented for Stanton number distribution, skin friction coefficient distribution, and turbulence intensity profiles. The rough surface is c