Zobrazeno 1 - 10
of 62
pro vyhledávání: '"M. Gopi Krishna"'
Publikováno v:
Advances in Sciences and Technology, Vol 16, Iss 6, Pp 286-293 (2022)
Magnesium matrix composites (MMCs) exhibit excellent strength, low mass, and density. In the current study, silicon carbide (SiC) and graphite (Gr) particles are used as reinforcement, using AZ31 alloy as the matrix material. Using the stir casting m
Externí odkaz:
https://doaj.org/article/9c410e2a9558451ca5437c96818a855f
Publikováno v:
Journal of Natural Fibers, Vol 19, Iss 16, Pp 13401-13414 (2022)
The aim of the present research was to elicit the influence of fiber loading on the mechanical properties and thermal conductivity of Sansevieria roxburghiana leaf fibers reinforced epoxy composites. The mean micro-fibrillar angle of the extracted le
Externí odkaz:
https://doaj.org/article/f6c41c75cd794d6280befc1bed5b2310
Publikováno v:
Journal of Natural Fibers, Vol 19, Iss 9, Pp 3300-3316 (2022)
The rationale behind this present research is to extract and characterize the cellulosic fibers from the Sansevieria roxburghiana Schult. & Schult. F. leaves to prove their potential as polymer reinforcements. Characterization tests were conducted on
Externí odkaz:
https://doaj.org/article/36271184ddb949a4939b5e7afb916b83
Publikováno v:
Journal of Materials Research and Technology, Vol 14, Iss , Pp 174-185 (2021)
The dry sliding wear behavior of A7075 based composites strengthened with particulates of ZrB2 was examined using the pin-on-disc device. The composites were synthesized by reinforcing different weight % (5, 10, and 15) of the ZrB2 using a stir casti
Externí odkaz:
https://doaj.org/article/19531f8979174d25abefb2e4920a531f
Publikováno v:
Results in Engineering, Vol 4, Iss , Pp - (2019)
Aluminium composite metallic materials are prepared by stir-cast technique, reinforcing 5 wt% copper powder (50 μm size) in Al–5wt% Cu alloy. SEM structures shows Cu particles not alloyed with the matrix material. EDAX studies inveterate the
Externí odkaz:
https://doaj.org/article/996fbaddd40941b7b71a6dd31472809a
Autor:
B. Lakshmana Prasad, G. Neelaiah, M. Gopi Krishna, S.V.V. Ramana, K. Sai Prakash, G. Sarika, G. Pradeep Kumar Reddy, Ravikumar Dumpala, B. Ratna Sunil
Publikováno v:
Journal of Magnesium and Alloys, Vol 6, Iss 1, Pp 71-76 (2018)
In the present work, the effect of process parameters on joining of AZ91 Mg alloy and Al6063 aluminum alloy sheets during friction stir welding (FSP) was studied. A successful joint was achieved at 1100 r.p.m. tool rotational speed and 25 mm/min tool
Externí odkaz:
https://doaj.org/article/823f0684552b4b86af6b5366b102bccf
Publikováno v:
In Materials Today Communications December 2020 25
Publikováno v:
Journal of Materials Research and Technology, Vol 14, Iss, Pp 174-185 (2021)
The dry sliding wear behavior of A7075 based composites strengthened with particulates of ZrB2 was examined using the pin-on-disc device. The composites were synthesized by reinforcing different weight % (5, 10, and 15) of the ZrB2 using a stir casti
Publikováno v:
Journal of Natural Fibers. 19:3300-3316
The rationale behind this present research is to extract and characterize the cellulosic fibers from the Sansevieria roxburghiana Schult. & Schult. F. leaves to prove their potential as polymer rei...
Publikováno v:
Journal of Advanced Research in Dynamical and Control Systems. 12:217-225