Zobrazeno 1 - 10
of 57
pro vyhledávání: '"M. E. Fine"'
Publikováno v:
Tribology Transactions. 37:587-593
The frictional behavior of certain nitrogen-containing ceramics, such as silicon nitride, alpha sialons, and beta sialons as journal materials were studied in conformal contact with a tin-coated Al-Si alloy (Al-Si/Sn), forged 1141 steel and a cast al
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ac1a9ff1656396604d82b0b37cd73ff2
https://doi.org/10.1080/10402009408983333
https://doi.org/10.1080/10402009408983333
Publikováno v:
Tribology Transactions. 37:735-742
The wear behavior of SiC particle-reinforced aluminum alloy matrix composites as journal bearing materials in conformal contact against case hardened AISI 1016 steel under mixed lubrication conditions using SAE 10W30 oil was investigated. The bearing
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9961a3f8ac06cbb6e5981db96fae2ab2
https://doi.org/10.1080/10402009408983353
https://doi.org/10.1080/10402009408983353
Publikováno v:
Tribology Transactions. 37:277-284
Tin coatings on Al-Si alloys are widely used in the automotive industries. The soft tin coating and the harder substrate alloy form a tribological system with the advantages of low friction and reasonably high load-bearing capacity. Wear tests of tin
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4e0052ea8383255cdfb82e6ce7196c05
https://doi.org/10.1080/10402009408983293
https://doi.org/10.1080/10402009408983293
Publikováno v:
Tribology Transactions. 33:96-104
Polycrystalline α-alumina surface alloyed with chromia in lubricated sliding contact with 52100 steel was previously shown to have much better wear resistance than unalloyed α-alumina. Surface alloying with titania had the opposite effect. The pres
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e0f874d2c8aff2fc30da9a7c909a076f
https://doi.org/10.1080/10402009008981935
https://doi.org/10.1080/10402009008981935
Publikováno v:
Electronics Manufacturing Issues.
The proposed model describes constitutive behavior of 63Sn-37Pb solder including effects of size, thermomechanical loading and cyclic damage. Its application to the uniaxial fatigue data shows a good agreement with the experiments.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::daea4e0d7bd0ebff0b7fcc63d664de90
https://doi.org/10.1115/imece1999-0927
https://doi.org/10.1115/imece1999-0927
Autor:
G. Ghosh, M. E. Fine
Publikováno v:
Microscopy and Microanalysis. 3:715-716
Due to the interfacial reaction between the solder and substrate, either during manufacturing or in service, the solder joints may contain one or more intermetallic layers at the interface. While such intermetallic layers may provide strong bonding,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::acfb2a54152c16c95f08d473c0b9a890
https://doi.org/10.1017/s1431927600010461
https://doi.org/10.1017/s1431927600010461
Publikováno v:
Physical Review B. 31:1000-1011
Low-temperature magnetic susceptibilities yield an effective magnetic moment per W atom of (3.24\ifmmode\pm\else\textpm\fi{}0.10)${\ensuremath{\mu}}_{B}$ for both ${\mathrm{W}}_{0.05}$${\mathrm{V}}_{0.95}$${\mathrm{O}}_{2}$ and ${\mathrm{W}}_{0.08}$$
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ca18d27257edd0b1e74b89c948dc31b6
https://doi.org/10.1103/physrevb.31.1000
https://doi.org/10.1103/physrevb.31.1000
Publikováno v:
Journal of Materials Science. 12:675-683
The presence of Cu precipitates counteracts the cyclic softening present in ordinary quenched and tempered steels. This is expected to result in an increase in fatigue limit. The fatigue crack propagation rate (dc/dN) at constant ΔK in the Cu-C stee
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6e7c86cfb6d48a6c690e93cb1dd065dd
https://doi.org/10.1007/bf00548157
https://doi.org/10.1007/bf00548157
Publikováno v:
Metallurgical Transactions A. 7:669-682
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cb04c44597cbd11f0933a54db80169ea
https://doi.org/10.1007/bf02646475
https://doi.org/10.1007/bf02646475
Autor:
S. I. Kwun, M. E. Fine
Publikováno v:
Fatigue & Fracture of Engineering Materials and Structures. 3:367-381
— –The rate of propagation of macrofatigue cracks down to near threshold was measured in air in three tempered martensitic steels; HY80, HY130 and 4140 (650°C temper). The value of ΔKth was determined by the load-shedding technique in center no
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bc05769b72bcb2d27869157e50676015
https://doi.org/10.1111/j.1460-2695.1980.tb01385.x
https://doi.org/10.1111/j.1460-2695.1980.tb01385.x