Zobrazeno 1 - 10
of 20
pro vyhledávání: '"M. C. MkPadi"'
Publikováno v:
Combustion Science and Technology. 178:1911-1926
Partially filled interconnected vessels are investigated using hydrogen-air mixtures in the lean flammable range. Homogeneous hydrogen-air mixtures (10–22% by volume) were prepared in a 100 L cylindrical vessel which was connected to a larger (400
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f8722e0981feaa93c62f68f27338cfa0
https://doi.org/10.1080/00102200600790904
https://doi.org/10.1080/00102200600790904
Publikováno v:
Journal of the Energy Institute. 79:152-157
Interconnected geometries are a common feature in modern industrial installations, often containing potentially flammable mixtures which, if ignited, can transmit an explosion to connected chambers. The present paper will present some experimental da
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::36fe59a1f2e3bc10a3e59b850894372c
https://doi.org/10.1179/174602206x117760
https://doi.org/10.1179/174602206x117760
Publikováno v:
Journal of the Energy Institute. 78:172-184
A 45° eight flat bladed swirler was investigated with eight equispaced fuel holes 20 mm downstream of the swirler exit on the outer wall of the swirler discharge duct. The swirler had a dump flow expansion from the swirler discharge duct (diameter d
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cb20ad30c6e39aa2b0ddfeb4e62f1093
https://doi.org/10.1179/174602205x68298
https://doi.org/10.1179/174602205x68298
Autor:
G. Ferrara, Herodotos N. Phylaktou, Gordon E. Andrews, A. Di Benedetto, M. C. Mkpadi, S. K. Willacy
Publikováno v:
Fire Safety Science. 8:1341-1352
It is commonplace in industrial installations to have duct vented vessels, the design of which is often based upon the premise that central ignition will provide the worst case scenario. This research investigates duct-vented explosions using a vente
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9efe63daa146407760e207057e395877
https://doi.org/10.3801/iafss.fss.8-1341
https://doi.org/10.3801/iafss.fss.8-1341
Publikováno v:
Journal of Turbomachinery. 128:321-331
Impingement flat wall cooling, with 15.2 mm pitch square hole arrays, was investigated in the presence of an array of interrupted rib obstacles. These ribs took the form of rectangular pin-fins with a 50% blockage to the cross flow. One side exit of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f9495b1d9af609ca2cc61ac82c6657bc
https://doi.org/10.1115/1.1860574
https://doi.org/10.1115/1.1860574
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 204:175-182
Experimental measurements of the overall cooling effectiveness for full-coverage discrete hole effusion cooling are presented for a wide range of practical geometries and for a density ratio between the coolant and combustion gases of 2.5. The influe
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7e6468a32834f93fc560a98868e7d51b
https://doi.org/10.1243/pime_proc_1990_204_024_02
https://doi.org/10.1243/pime_proc_1990_204_024_02
Publikováno v:
Volume 2: Turbo Expo 2007.
The use of a central pilot with a well mixed radial swirler combustor was investigated, at 600K and atmospheric pressure, to improve the power turn down of a low NOx combustor design. Hydrogen was compared with natural gas as the pilot fuel, using be
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d57d221f1cb60ef6b4eb61ae93b61a0a
https://doi.org/10.1115/gt2007-27414
https://doi.org/10.1115/gt2007-27414
Autor:
Derek B. Ingham, Nadiahnor Md Yusop, Mohammed Pourkashanian, Gordon E. Andrews, M. C. MkPadi, I. M. Khalifa
Publikováno v:
Volume 4: Turbo Expo 2007, Parts A and B.
This paper presents computational predictions of adiabatic film cooling effectiveness for effusion cooling systems with 90° and 30° holes. Predictions are performed for a range of coolant injection mass flow rates per unit surface area, G, of 0.1kg
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::28a752f19771a8597ef9136a3304b19f
https://doi.org/10.1115/gt2007-27467
https://doi.org/10.1115/gt2007-27467
Publikováno v:
Volume 2: Turbo Expo 2007.
Radial swirlers have proved effective in achieving low NOx using natural gas and this work investigates their use with kerosene with and without a central NG pilot. Two kerosene fuel injection locations were compared: at the inlet to the vane passage
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a7b0b4dc91468ccd4cb6010c66a1fe67
https://doi.org/10.1115/gt2007-27415
https://doi.org/10.1115/gt2007-27415
Publikováno v:
New and Renewable Technologies for Sustainable Development ISBN: 9781461350095
The utilisation of waste methane off gases from the ventilation of mines and water supplies was investigated. Waste gases with methane in air contents from 0.5–3% were investigated using a staged combustion system with a lean well-mixed radial swir
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b36623dcfdb307a1b7aa6450177da627
https://doi.org/10.1007/978-1-4615-0296-8_50
https://doi.org/10.1007/978-1-4615-0296-8_50
