Zobrazeno 1 - 10
of 84
pro vyhledávání: '"M J, Davidson"'
Publikováno v:
Silicon. 14:11675-11686
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::fee942687b03197ff5ffb41edf80b26d
https://doi.org/10.1007/s12633-022-01689-5
https://doi.org/10.1007/s12633-022-01689-5
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 236:3146-3159
An experimental investigation has been observed on hardness, sintered density and corrosion behaviour of two-layered structured Al-xCu/Al sample through powder metallurgical route under hot compaction condition. The samples were prepared with differe
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f4d5fea63a36ebd36a17413d22f4154e
https://doi.org/10.1177/09544062211034209
https://doi.org/10.1177/09544062211034209
Publikováno v:
Metals and Materials International. 28:931-944
Mathematical models are among the new approaches employed to predict the properties of any material under various conditions. Mathematical models are essential for not only understanding the material properties but also estimating the cost of design,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5f44de7567379e455666ccac0e66d4d8
https://doi.org/10.1007/s12540-021-00967-y
https://doi.org/10.1007/s12540-021-00967-y
Autor:
D. T. Sarathchandra, M. J. Davidson
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 235:1439-1448
Inconel 625 alloy resists corrosion, fatigue and wear at elevated temperatures and hence they are used in aerospace, chemical, petrochemical, marine, and other high-temperature applications. In the present study, single beads of Inconel 625 were depo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::99835b539b5bcf3611b6f631fe64e636
https://doi.org/10.1177/09544089211004718
https://doi.org/10.1177/09544089211004718
Publikováno v:
Materials Today: Proceedings. 41:1156-1159
In the present work, four dissimilar-layered volume fraction of Al-Cu functionally graded materials were fabricated by using powder metallurgy. The volume fraction of Cu (0, 5, 10 and 15 wt%) powder mixture was hot pressed with a pressure of 400 MPa
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1166089d8ae7f7d3968c7fe97f22bcbb
https://doi.org/10.1016/j.matpr.2020.09.157
https://doi.org/10.1016/j.matpr.2020.09.157
Publikováno v:
Materials Today: Proceedings. 46:9212-9216
In the present work, interfacial properties of a two-layered Aluminium-Copper (Al-Cu) functionally graded materials (FGMs) were fabricated by powder metallurgy method. The volume fraction of Cu (5, 10 and 15%wt.) powder mixture was hot pressed with a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b1363c3bab6f4102f09b73d373fcb9af
https://doi.org/10.1016/j.matpr.2020.01.401
https://doi.org/10.1016/j.matpr.2020.01.401
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 235:581-596
The deformation behavior of Al–Cu–Mg sintered preforms has been investigated by extrusion in the temperature range of 450–550°C and strain rate range of 0.1–0.3 s−1, respectively. The aim of this study is to analyze the effect of initial p
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8092a111ab7a00b1af5dd4552e7dc49a
https://doi.org/10.1177/1464420720971324
https://doi.org/10.1177/1464420720971324
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 235:582-593
An experimental investigation has been performed on the hot formability and densification characteristics of Al-Cu/Al two-layered structure composites. The two-layered composites having different Cu compositions in the Al-Cu layer such as (Cu: 5wt. %
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c5ba8bd42d5cbb4924fba0faff10ed63
https://doi.org/10.1177/0954408920971974
https://doi.org/10.1177/0954408920971974
Publikováno v:
Journal of Materials Engineering and Performance. 29:6378-6389
Thixoforming is a commonly known material processing technique that involves the fabrication of materials between solidus and liquidus temperatures. One of the prerequisites for this process is that the microstructure of the feedstock material must c
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4d2432ff7632ac422f743664667d8f65
https://doi.org/10.1007/s11665-020-05143-8
https://doi.org/10.1007/s11665-020-05143-8
Publikováno v:
Materials and Manufacturing Processes. 35:852-858
In the present study, the effect of process parameters in Wire Arc Additive Manufacturing (WAAM) of Stainless Steel 304 as filler wire and mild steel as a substrate has been investigated. The depos...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::373e670bcbaf8bc4ee707e3a1d77f182
https://doi.org/10.1080/10426914.2020.1743852
https://doi.org/10.1080/10426914.2020.1743852