Zobrazeno 1 - 10
of 49
pro vyhledávání: '"M I, Sidorenko"'
Autor:
L. A. Isaevich, M. I. Sidorenko
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 4, Pp 155-159 (2019)
Based on the analysis of the essence of localization of the deformation zone the display signs of this factor and the accompanying positive effect were established. It was the basis for combining a wide range of plastically shaped car parts into grou
Externí odkaz:
https://doaj.org/article/8fc7522389fc4b96bf6c021028805de8
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 3, Pp 101-109 (2018)
The nominal rotational torque on the rolls during asymmetric rolling of a strip of few-leaf springs was calculated. To stabilize the rolling process it was proposed to use a front tension and a minimum value of such tension was computed. Misalignment
Externí odkaz:
https://doaj.org/article/e340ffd4916c4d158b42ec4445c504d6
Autor:
M. I. Sidorenko
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 1, Pp 132-136 (2018)
The technology of plastic forming of wide flanges in tube billets with the predicted length of the transitional toroidal section between the outer plane of the flange and the internal cavity of the pipe is proposed. The procedure for calculating the
Externí odkaz:
https://doaj.org/article/b6b739136d0e4f1cbe7f1f6d516a1179
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 2, Pp 65-69 (2017)
Based on the analysis of the known methods of separation of the bar stock into cut-to-length sections, it has been found that the most effective is the process of transverse screw rolling with the preliminary application of a ring-shaped wedge-shaped
Externí odkaz:
https://doaj.org/article/9e279a4594d54648b463f5164fabb69c
Autor:
L. A. Isaevich, M. I. Sidorenko
Publikováno v:
Наука и техника, Vol 16, Iss 1, Pp 16-20 (2017)
Based on the analysis of known methods of separation of bar mix to length determined that the most effective method of forming an annular groove therein plastic tapered section, with a gradual deformation of the metal disc blades recess which is dest
Externí odkaz:
https://doaj.org/article/10be20438939456a8dfa7152c7f51482
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 3, Pp 105-110 (2016)
The calculation of the nominal torque on the rolls during asymmetric rolling of a strip with small laminated springs are held. To stabilize the rolling process it is proposed to use a front tension and a certain minimum value was calculated. Misalign
Externí odkaz:
https://doaj.org/article/953ed9c29dda49e59fc96f633eb8a0d2
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 1, Pp 91-95 (2016)
The features of the process of longitudinal rolling bands of variable thickness with increasing compression are considered. The graphs of changes of instant advance when rolling with increasing compression are given. Compression modes bands of variab
Externí odkaz:
https://doaj.org/article/8f233bf754bf4273a43e66d09eff5fe5
Autor:
L. A. Isaevich, M. I. Sidorenko
Publikováno v:
Наука и техника, Vol 0, Iss 1, Pp 39-45 (2013)
There is considered the Analysis of kinematics and stress parameters of plastic deformation zones by rolling of changeable thick plates on mobile profile mandrel.
Externí odkaz:
https://doaj.org/article/329f7e8a12034e4991bff0c0d5f08083
Publikováno v:
Вісник проблем біології і медицини, Iss 3, Pp 254-258 (2020)
The morphological aspects of the restructuring of the structural components of the ileum of rabbits during surgery and suturing of the wound defect with synthetic monofilament thread Vikril are investigated. It was determined that when using this mod
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d16d8f93c53980c423a65147e00ce791
https://doaj.org/article/b8047f27f1cb4a76b1ec1b5a27ffa620
https://doaj.org/article/b8047f27f1cb4a76b1ec1b5a27ffa620
Autor:
M. I. Sidorenko
Publikováno v:
Наука и техника, Vol 0, Iss 4, Pp 7-12 (2012)
The paper describes design of rolling heads used for cold rolling of straight-sided splines on shafts and presents theoretical principles of this process. These principles make it possible to calculate an effort which is required for pushing billet t
Externí odkaz:
https://doaj.org/article/35914bcad51c4a20b08f2cf2c169410d