Zobrazeno 1 - 10
of 106
pro vyhledávání: '"Ludmila KUČEROVÁ"'
Publikováno v:
Materials & Design, Vol 241, Iss , Pp 112938- (2024)
Research into precipitation hardening in additively manufactured (AM) maraging steel is mainly conducted on the material after several hours of holding at the peak hardening temperatures of 450–500 °C. Lower temperatures are expected to have littl
Externí odkaz:
https://doaj.org/article/a3e61c10b75747a8be3af4ad668ee420
Publikováno v:
Journal of Materials Research and Technology, Vol 26, Iss , Pp 8688-8703 (2023)
The effect of the processing parameters on the final microstructure and mechanical properties was investigated for additively manufactured maraging tool steel 1.2709. First, an effective range of appropriate combinations of heat treatment parameters
Externí odkaz:
https://doaj.org/article/7a8f815babb64ea0bbfc075090689026
Publikováno v:
Materials, Vol 16, Iss 13, p 4747 (2023)
Most injection-moulded plastics are injection moulded into moulds made from conventional materials such as steel or aluminium. The production costs of the mould are considerable. 3D printing from plastic can be used for injection moulds to save these
Externí odkaz:
https://doaj.org/article/510ab31e94a44218a484d11a61b99ad2
Publikováno v:
Materials, Vol 16, Iss 12, p 4340 (2023)
Medium manganese steels fall into the category of modern third-generation high-strength steels. Thanks to their alloying, they use a number of strengthening mechanisms, such as the TRIP and TWIP effects, to achieve their mechanical properties. The ex
Externí odkaz:
https://doaj.org/article/7c574e733af34b5e955609891cfb341e
Publikováno v:
Materials, Vol 16, Iss 10, p 3852 (2023)
The paper presents the possibilities of heat treatment of low-density structural steels usable for springs. Heats have been prepared with chemical compositions 0.7 wt% C and 1 wt% C, as well as 7 wt% Al and 5 wt% Al. Samples were prepared from ingots
Externí odkaz:
https://doaj.org/article/86465f8666e442db965a0b86c834948b
Publikováno v:
Metals, Vol 13, Iss 5, p 975 (2023)
Precipitation strengthening in titanium-stabilized austenitic stainless steels can improve the hot yield strength, as requested, e.g., for nuclear industry applications. The resulting properties depend mainly on the parameters of the heat treatment a
Externí odkaz:
https://doaj.org/article/487b5c7d80cd4552b0e952fa30910917
Publikováno v:
Materials, Vol 16, Iss 1, p 442 (2023)
Press-hardening, also known as hot stamping, is a manufacturing process for producing car body parts that must meet the high demands of their mechanical properties and safety parameters. Moreover, these components often require different mechanical p
Externí odkaz:
https://doaj.org/article/5087296d998941c9b09a1bddcbc3b7e9
Publikováno v:
Metals, Vol 12, Iss 11, p 1869 (2022)
Ledeburitic tool steel X210Cr12 was processed by passing through a semi-solid state with subsequent forming on a hydraulic press, thus achieving a fine-grained martensitic matrix, uniformly dispersed fine precipitates, and removal of sharp-edged prim
Externí odkaz:
https://doaj.org/article/365d8bc6357a4d18944c4e091332e79e
Autor:
Jiří Hájek, Zbyšek Nový, Ludmila Kučerová, Hana Jirková, Pavel Salvetr, Petr Motyčka, Jan Hajšman, Tereza Bystřická
Publikováno v:
Materials, Vol 15, Iss 7, p 2539 (2022)
This paper introduces a new alloying concept for low-density steels. Based on model calculations, samples—or “heats”—with 0.7 wt% C, 1.45 wt% Si, 2 wt% Cr, 0.5 wt% Ni, and an aluminium content varying from 5 to 7 wt% are prepared. The alloys
Externí odkaz:
https://doaj.org/article/05b8d7c6d26c4bb59c9d38f21ca4e080
Publikováno v:
Metals, Vol 11, Iss 9, p 1446 (2021)
The aim of this paper is to evaluate the influence of small variations in chemical composition on the corrosion resistance and mechanical properties of low-manganese and medium manganese high strength steels. Six different steels with manganese conte
Externí odkaz:
https://doaj.org/article/aba0ed40275148fe8ee276b21c028b65