Zobrazeno 1 - 10
of 18
pro vyhledávání: '"Linda A. Domeier"'
Publikováno v:
Journal of Applied Polymer Science. 115:3217-3229
The shape-memory polymer performance of urethane foams compressed under a variety of conditions was characterized. The foams were water-blown thermosets with a closed-cell structure and ranged in density from about 0.25 to 0.75 g/cm3. Compressive def
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::852a73497e97d003055895b818ed7523
https://doi.org/10.1002/app.31413
https://doi.org/10.1002/app.31413
Autor:
Linda A. Domeier, Nancy Y. C. Yang
Publikováno v:
Journal of Applied Polymer Science. 110:3973-3984
Electrical resistance anomalies noted in EPDM gaskets have been attributed to zinc-enriched surface sublayers, about 10-{micro}m thick, in the sulfur cured rubber material. Gasket over-compression provided the necessary connector pin contact and was
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9e6170e46109f8e8dd7556a5240940e6
https://doi.org/10.1002/app.28984
https://doi.org/10.1002/app.28984
Publikováno v:
Journal of the American Ceramic Society. 88:570-578
Fabrication of microstructures has been the subject of considerable attention in recent years. Techniques such as surface silicon micromachining and bulk silicon etch have emerged as practical methods for thin microstructures and processes such as LI
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3e635cc0a878f9ab681b00ca54b1bb86
https://doi.org/10.1111/j.1551-2916.2005.00134.x
https://doi.org/10.1111/j.1551-2916.2005.00134.x
Autor:
Alfredo M. Morales, Jill M. Hruby, Marcela Gonzales, Linda A. Domeier, R. Janek, John T. Hachman
Publikováno v:
Microsystem Technologies. 8:78-82
Novel technology is presented which allows the rapid replication of electroforming plastic micromolds. This technique incorporates microscreens into hot embossing or injection molding processes to produce sacrificial molds with conducting bases and i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a510b46ae6311d8616ef348f4b8f0c9c
https://doi.org/10.1007/s00542-001-0135-9
https://doi.org/10.1007/s00542-001-0135-9
Publikováno v:
Tetrahedron Letters. 33:733-736
N-Cyanoimides are useful precursors to N-alkyl or N-aryl imides. Treatment of aromatic N-cyanoimides such as N-cyanophthalimide (1) with primary amines provides N-substituted imides directly, while aliphatic N-cyanoimides afford diamide intermediates
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::dfb6297321d680e41fd21e0708f7ce40
https://doi.org/10.1016/s0040-4039(00)77702-1
https://doi.org/10.1016/s0040-4039(00)77702-1
Autor:
Seethambal S. Mani, Linda A. Domeier, Brita M. Mittal, Thomas Wallow, Alfredo M. Morales, Robert W. Crocker, Bruce P. Mosier, Marion C. Hunter, Eric B. Cummings, K. Jeffery Campbell, Rafael V. Davalos, Shane M. Sickafoose, Blake A. Simmons, Gregory J. McGraw, Karen Lee Krafcik
Publikováno v:
Micromachining and Microfabrication Process Technology XI.
We are developing a variety of microsystems for the separation and detection of biological samples. At the heart of these systems, inexpensive polymer microfluidic chips carry out sample preparation and analysis. Fabrication of polymer microfluidic c
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1cabb8fde0e4f6f2281420e9648b6a5b
https://doi.org/10.1117/12.648135
https://doi.org/10.1117/12.648135
Autor:
Bruce P. Mosier, Robert W. Crocker, Seethambal S. Mani, Linda A. Domeier, John T. Hachman, Marion C. Hunter, Alfredo M. Morales, John D. Brazzle, Cindy K. Harnett, Eric B. Goods, Blake A. Simmons
Publikováno v:
SPIE Proceedings.
Sandia and Lawrence Livermore National Laboratories are developing a briefcase-sized, broad-spectrum bioagent detection system. This autonomous instrument, the BioBriefcase, will monitor the environment and warn against bacterium, virus, and toxin ba
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ab46b09fe8b6612f1aafa092fdd09415
https://doi.org/10.1117/12.592802
https://doi.org/10.1117/12.592802
Publikováno v:
Micromachining and Microfabrication Process Technology IX.
A process for the rapid replication of electroforming plastic micromolds has been developed at Sandia National Laboratories, Livermore, CA. The process is based on injection molding of plastic replicates with integral metallic screens to produce sacr
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::918d14bc95416cb508754f0d68026f8b
https://doi.org/10.1117/12.530761
https://doi.org/10.1117/12.530761
Autor:
Cheryl A. Hauck, Karen Lee Krafcik, Georg Aigeldinger, Alfredo M. Morales, Linda A. Domeier, Patrick N. Keifer, Peter C. Yang, John T. Hachman, Michelle A. Bankert, Dorrance E. McLean
Publikováno v:
SPIE Proceedings.
The use of silver filled PMMA as a sacrificial layer for the fabrication of multilevel LIGA microparts is presented. In this technique, a bottom level of standard electroformed LIGA parts is first produced on a metallized substrate such as a silicon
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::34ebe34c218a45e0323a8fdfb410daf2
https://doi.org/10.1117/12.472751
https://doi.org/10.1117/12.472751
Microstructure and mechanical properties of nickel microparts electroformed in replicated LIGA molds
Autor:
John T. Hachman, Steven H. Goods, Alfredo M. Morales, Marcela Gonzales, Linda A. Domeier, Andrew D. Gardea, Jill M. Hruby, Dorrance E. McLean, Nancy Y. C. Yang
Publikováno v:
SPIE Proceedings.
A novel process for the rapid replication of electroforming plastic micromolds has been developed and is now being used to produce plated nickel test specimens. The process combines hot embossing or injection molding with metallic microscreens to pro
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::81cbb9e8c52b8296a95d7218ec409b67
https://doi.org/10.1117/12.472748
https://doi.org/10.1117/12.472748