Zobrazeno 1 - 10
of 71
pro vyhledávání: '"Lena K. L. Falk"'
Publikováno v:
Materials Characterization. 144:48-56
Atom probe tomography has shown (Cr,W)C to be present as a thin WC grain surface layer in an as-sintered Cr-doped WC-Co cemented carbide microstructure slowly cooled from the sintering temperature. The Co-rich binder phase contained a segregation of
Publikováno v:
Ultramicroscopy. 159:308-313
The elemental distribution within a Ti-Si-Al-C-N coating grown by physical vapour deposition on a Cr-doped WC-Co cemented carbide substrate has been investigated by atom probe tomography. Special attention was paid to the coating/substrate interface
Publikováno v:
International Journal of Refractory Metals and Hard Materials. 49:81-87
The microstructure of a WC–Co based cemented carbide has been investigated before and after plastic deformation at high temperatures. The material was fabricated with a Co binder phase content of 16 vol.% and smaller additions of Cr. Hot compressiv
Publikováno v:
Ceramics International. 35:1293-1296
Alumina/silicon carbide composites have been fabricated by a new technique involving the in situ synthesis of nano-sized SiC particles. A mixture of alumina powder and silicon carbide precursors was prepared in an aqueous suspension. Green bodies wer
Publikováno v:
Journal of the European Ceramic Society. 29:539-550
The microstructures of as-sintered and creep tested polycrystalline mullite and mullite reinforced with 5 vol.% nano-sized SiC particles have been characterized by scanning and transmission electron microscopy. The dislocation densities after tensile
Autor:
Stefan Gustafsson, Lena K. L. Falk
Publikováno v:
Journal of Microscopy. 233:346-351
Burgers vectors of matrix dislocations in mullite have been determined by the defocus large-angle convergent beam electron diffraction technique. Vectors of the types [100], [010], [110] and [112] were identified. These Burgers vectors are discussed
Publikováno v:
Key Engineering Materials. 403:103-106
This paper is focussed on the development of microstructure during crystallisation heat treatment of B-phase parent glasses with composition (e/o) 35R:45Si:20Al:83O:17N, where R = Er, Yb, Y or a mixture of Y and Yb. Extensive high resolution analytic
Publikováno v:
Ceramics International. 34:1609-1615
Al2O3 + 5 vol% SiC composite ceramics were prepared via a conventional powder processing route followed by pressureless sintering. Commercially available Al2O3 and SiC powders were milled together in an aqueous suspension. The slurry was freeze granu
Publikováno v:
Carbon. 45:2065-2071
The development during early growth of a multi-wall carbon nanotube film by thermal CVD with acetylene (C2H2) and hydrogen at 750 °C has been characterized in detail by cross-section transmission electron microscopy. The studies provide information
Publikováno v:
Materials Science Forum. 554:113-118
The intergranular microstructure in a liquid phase sintered silicon nitride based ceramic may be viewed as an oxynitride glass-ceramic. This work is concerned with the incorporation of yttrium B-phase, which is a five-component phase, into the interg