Zobrazeno 1 - 10
of 95
pro vyhledávání: '"Larry Pershin"'
Publikováno v:
Materials & Design, Vol 160, Iss , Pp 974-984 (2018)
A novel plasma spray process, solution precursor vacuum plasma spray, was developed and used to fabricate superhydrophobic ceramic coatings. By injecting Yb(NO3)3 solution into a plasma jet operated at low pressure, a crystalline Yb2O3 coating was de
Externí odkaz:
https://doaj.org/article/ad76e5444a7941df91105d9cd1cdfd9c
Publikováno v:
International Thermal Spray Conference.
The influence of air plasma sprayed alumina coating geometry, microstructure, interface roughness on its delamination and crack propagation resistance during low temperature thermal cycling, i.e. thermal mismatch stress, is investigated both numerica
Publikováno v:
BioResources, Vol 12, Iss 1, Pp 143-156 (2016)
Thermal spray technology was used to apply a thin layer of copper (Cu metal as an antimicrobial coating) on the surfaces of a number of different solid woods and medium-density fiberboard (MDF) wood composites. The adhesion of a Cu coating to Swieten
Externí odkaz:
https://doaj.org/article/185ac73f4586411e8a018eea95c03c8f
Publikováno v:
Journal of Thermal Spray Technology
Microbial and viral pathogen contamination of touch surfaces contributes to the rapid transmission of diseases. It has been known for decades that microbes and viruses are rapidly inactivated when exposed to copper and its alloys. Consequently, the u
Publikováno v:
Journal of Materials Science & Technology. 62:107-118
The basis of the hydrophobicity of lanthanide rare earth oxides (REOs) has been the subject of considerable debate. To explore this question, the wetting behaviors and surface compositions of hierarchically-structured Yb2O3 (one of the REOs) coatings
Publikováno v:
Journal of the European Ceramic Society. 40:1692-1702
A facile post-deposition plasma treatment was developed to tune the wetting behavior of Yb2O3 coatings deposited via the solution precursor plasma spray process. The as-deposited coatings exhibited the lotus effect after vacuum treatment, with a wate
Autor:
Yugesh Vadikkeettil, Yugeswaran Subramaniam, Ramaswamy Murugan, P.V. Ananthapadmanabhan, Javad Mostaghimi, Larry Pershin, Catherine Batiot-Dupeyrat, Yasukazu Kobayashi
Publikováno v:
Renewable and Sustainable Energy Reviews. 161:112343
Publikováno v:
Journal of Thermal Spray Technology. 28:242-254
The plasma jet in the vacuum plasma spray process presents characteristics such as supersonic flow, expanded jet dimensions, and a smaller decay rate for jet velocity and temperature that are distinctly different from those of atmospheric plasma spra
Autor:
Larry Pershin, Peng Yi, Xianghua Zhan, Yancong Liu, Pengyun Xu, Javad Mostaghimi, Delong Jia, Hao Yi
Publikováno v:
Ceramics International. 44:22645-22655
In the present study, atmospheric plasma-sprayed yttria-stabilized zirconia coatings were post-remelted by a continuous diode laser to improve the hot corrosion resistance for as-sprayed coatings. The coating surfaces were covered with a salt mixture
Publikováno v:
Journal of Physics D: Applied Physics. 55:204001
Suspension plasma spray (SPS) has been developed as a rapid, facile and cost-effective process to deposit columnar-structured thermal barrier coatings (TBCs). In contrast to the most commonly used ethanol-based suspensions, water-based suspensions ha