Zobrazeno 1 - 10
of 42
pro vyhledávání: '"L. Ponraj Sankar"'
Autor:
A. Parthiban, V. Vijayan, T. Sathish, S. Dinesh Kumar, L. Ponraj Sankar, N. Parthipan, Dawit Tafesse, Mebratu Tufa
Publikováno v:
Advances in Materials Science and Engineering, Vol 2021 (2021)
Automobile industries were ready to recycle the waste old parts as well as the damaged parts of the old vehicles as much as possible. This study mainly focused on the recycling of the waste and damaged aluminium frames of the automobile bodies. These
Externí odkaz:
https://doaj.org/article/d9985d8130c2438bbf03a5eb288e44b6
Strength Enhancement Study on Composites of AA6066 Aluminium Alloy with Magnesium Oxide and Coal Ash
Autor:
L. Ponraj Sankar, G. Aruna, T. Sathish, A. Parthiban, V. Vijayan, S. Dinesh Kumar, S. Rajkumar, Addisalem Mekonnen, Mebratu Tufa
Publikováno v:
Advances in Materials Science and Engineering, Vol 2021 (2021)
Aluminium alloy is the most favourable material based on the various properties and economic factors. Always there are so many researches going on based on the enhancement of the material properties with various combinations and the various materials
Externí odkaz:
https://doaj.org/article/2d64efa1495e4fb2a9f3e14a6c156b42
Autor:
V. Vijayan, A. Parthiban, T. Sathish, L. Ponraj Sankar, S. Dinesh Kumar, S. Saravanakumar, Dawit Tafesse
Publikováno v:
Advances in Materials Science and Engineering, Vol 2021 (2021)
Here, the investigation is spotlighted on the aluminium alloy from the waste materials of the automobile bumpers which is a reinforced metal matrix composite created with 5 percentage of nickel and 5 percentage of magnesium oxide through the stir cas
Externí odkaz:
https://doaj.org/article/9b028bfd854d4541a8a0a5cbd0f270c9
Autor:
S. Dinesh Kumar, L. Ponraj Sankar, T. Sathish, V. Vijayan, A. Parthiban, R. Kamalakannan, S. Rajkumar
Publikováno v:
Advances in Materials Science and Engineering, Vol 2021 (2021)
Natural fiber composite is the most preferable research area in the modern situation due to its availability, applications, and ecofriendly quality. This paper deals with the influence of hemp fiber with the various compositions of the ramie fiber an
Externí odkaz:
https://doaj.org/article/fad4ae3eb92c4658b052951c08ef1902
Autor:
S. Dinesh Kumar, Dawit Tafesse, L. Ponraj Sankar, T. Sathish, A. Parthiban, Vineeth Vijayan, S. S. Saravanakumar
Publikováno v:
Advances in Materials Science and Engineering, Vol 2021 (2021)
Here, the investigation is spotlighted on the aluminium alloy from the waste materials of the automobile bumpers which is a reinforced metal matrix composite created with 5 percentage of nickel and 5 percentage of magnesium oxide through the stir cas
Strength Enhancement Study on Composites of AA6066 Aluminium Alloy with Magnesium Oxide and Coal Ash
Autor:
S. Rajkumar, Addisalem Mekonnen, S. Dinesh Kumar, Mebratu Tufa, T. Sathish, L. Ponraj Sankar, G. Aruna, A. Parthiban, Vineeth Vijayan
Publikováno v:
Advances in Materials Science and Engineering, Vol 2021 (2021)
Aluminium alloy is the most favourable material based on the various properties and economic factors. Always there are so many researches going on based on the enhancement of the material properties with various combinations and the various materials
Publikováno v:
Materials Today: Proceedings. 46:925-929
The aim of this deals with high strength concrete that means to get maximum strength by adding alccofine and C-set along with conventional concrete mix which results in the change of physical properties like compressive strength, tensile strength and
Publikováno v:
Materials Today: Proceedings. 46:857-861
In the Cold-Formed Steel (CFS) structural construction, the usage of built-up beam sections are increasing gradually. The demand for cold-formed steel sections is being increased. Hence it leads to the development of innovative and cost-effective bui
Publikováno v:
Journal of New Materials for Electrochemical Systems. 23:252-255
This paper aims to analyze the mechanical characteristics of Al-5%Cu/TiC metal matrix composite, like Surface Roughness, Tensile strength, wear rate of the cutting tool. Copper particles added with aluminum alloy, which can improve the machinability
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235:1443-1454
Thin-walled tubular configurations with hybridization concept have been gained special consideration in recent years owing to their substantial balance between light-weight characteristics and crashworthiness performance. In this context, some resear