Zobrazeno 1 - 10
of 101
pro vyhledávání: '"L. C. Tsao"'
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Autor:
L. C. Tsao
Publikováno v:
International Journal of Materials, Mechanics and Manufacturing. 8:34-39
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::15f4899bc070ce7fe1e8517ef9510330
https://doi.org/10.18178/ijmmm.2020.8.2.480
https://doi.org/10.18178/ijmmm.2020.8.2.480
Publikováno v:
Advances in Materials Science and Engineering, Vol 2021 (2021)
Due to the combined advantages of low cost, good soldering properties, and appropriate melting temperature range, novel Sn8Zn3Bi1Mg active solder was developed for direct soldering of transparent conductive oxide (TCO) ceramic targets with oxygen-fre
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::01fbd84585cfefd7a8cf8e60bc14c15c
Autor:
L. C. Tsao
Publikováno v:
Corrosion Engineering, Science and Technology. 53:582-590
The effects of the applied voltage on the morphology, composition and corrosion behaviour of Ti7Cu5Sn coated were investigated. At applied voltages lower than 250 V, the composite coatings consist of anatase-TiO2, rutile-TiO2, DCPD(CaHPO4·2H2O) and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::389d4b19e4541d6f78177f85ac3bde25
https://doi.org/10.1080/1478422x.2018.1513619
https://doi.org/10.1080/1478422x.2018.1513619
Publikováno v:
Transactions of Nonferrous Metals Society of China. 28:748-756
Al0.3CrFe1.5MnNi0.5 high entropy alloys (HEA) have special properties. The microstructures and shear strengths of HEA/HEA and HEA/6061-Al joints were determined after direct active soldering (DAS) in air with Sn3.5Ag4Ti active filler at 250 °C for 6
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6478e34be9aeb4f47337fcaddf1ab1e5
https://doi.org/10.1016/s1003-6326(18)64707-7
https://doi.org/10.1016/s1003-6326(18)64707-7
Publikováno v:
Corrosion Engineering, Science and Technology. 53:252-258
The microstructure and corrosion properties of Ti7CuxSn (x = 0–5 wt-%) alloys after solution treatment have been investigated. The alloys were solution-treated (ST) at 1000°C for 2 h, followed by quenching in water to room temperature. It was foun
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4a21401ef356a4b27d07b58306e20d9e
https://doi.org/10.1080/1478422x.2018.1450466
https://doi.org/10.1080/1478422x.2018.1450466
Publikováno v:
Applied Sciences
Volume 11
Issue 21
Applied Sciences, Vol 11, Iss 10440, p 10440 (2021)
Volume 11
Issue 21
Applied Sciences, Vol 11, Iss 10440, p 10440 (2021)
In this study, AA6061/AA6061 and AA6061/alumina were directly brazed with Al10.8Si10Cu, Al10Si10Cu4Ti and Al10Si10Cu4Ti0.1RE filler alloys at 530 °C for 10 min without the use of flux. The addition of titanium and rare-earth elements into Al10.8Si10
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8431f1dad96153802296a5d8e77cf241
https://doi.org/10.3390/app112110440
https://doi.org/10.3390/app112110440
Autor:
C. L. Chuang, L. C. Tsao
Publikováno v:
Journal of Materials Science: Materials in Electronics. 29:4096-4105
The effects of added nanoparticles (i.e., Al2O3 and TiO2) on the thermal, microstructural and mechanical properties of Sn3.5Ag0.5Zn nanocomposite solders have been investigated. Adding nanoparticles to the Sn3.5Ag0.5Zn solder increases the melting te
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::387f48951ee461929c0e9ef5a324224c
https://doi.org/10.1007/s10854-017-8354-8
https://doi.org/10.1007/s10854-017-8354-8
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Publikováno v:
Welding in the World. 60:109-116
The microstructure, phase constitution, melting character, and 6061 aluminum alloy brazing properties of Al-Si-Cu-Zn-Re filler metals with different copper contents were investigated. The Al-9.6Si-10Cu-10Zn-0.1Re, Al-9Si-15Cu-10Zn-0.1Re, and Al-8.4Si
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::271131720124c61c95effa1399285cd6
https://doi.org/10.1007/s40194-015-0279-3
https://doi.org/10.1007/s40194-015-0279-3