Zobrazeno 1 - 10
of 64
pro vyhledávání: '"L. A. Isaevich"'
Autor:
L. A. Isaevich, M. I. Sidorenko
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 4, Pp 155-159 (2019)
Based on the analysis of the essence of localization of the deformation zone the display signs of this factor and the accompanying positive effect were established. It was the basis for combining a wide range of plastically shaped car parts into grou
Externí odkaz:
https://doaj.org/article/8fc7522389fc4b96bf6c021028805de8
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 3, Pp 101-109 (2018)
The nominal rotational torque on the rolls during asymmetric rolling of a strip of few-leaf springs was calculated. To stabilize the rolling process it was proposed to use a front tension and a minimum value of such tension was computed. Misalignment
Externí odkaz:
https://doaj.org/article/e340ffd4916c4d158b42ec4445c504d6
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 2, Pp 65-69 (2017)
Based on the analysis of the known methods of separation of the bar stock into cut-to-length sections, it has been found that the most effective is the process of transverse screw rolling with the preliminary application of a ring-shaped wedge-shaped
Externí odkaz:
https://doaj.org/article/9e279a4594d54648b463f5164fabb69c
Autor:
L. A. Isaevich, M. I. Sidorenko
Publikováno v:
Наука и техника, Vol 16, Iss 1, Pp 16-20 (2017)
Based on the analysis of known methods of separation of bar mix to length determined that the most effective method of forming an annular groove therein plastic tapered section, with a gradual deformation of the metal disc blades recess which is dest
Externí odkaz:
https://doaj.org/article/10be20438939456a8dfa7152c7f51482
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 4, Pp 73-77 (2017)
Modeling of process of strip’s rolling with variable compression and an end’s bending was carried out. The computer model of production of a brake shoe pin of railway transport was defined. The values of the heat transfer coefficients during the
Externí odkaz:
https://doaj.org/article/6aa5154986944532bad4a2f10605e421
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 3, Pp 105-110 (2016)
The calculation of the nominal torque on the rolls during asymmetric rolling of a strip with small laminated springs are held. To stabilize the rolling process it is proposed to use a front tension and a certain minimum value was calculated. Misalign
Externí odkaz:
https://doaj.org/article/953ed9c29dda49e59fc96f633eb8a0d2
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 3, Pp 99-104 (2016)
The scheme of strip’s rolling with variable thickness and with a bend of a trailer site is offered. Conditions of strip’s rolling on the offered scheme at production of a brake shoe pin of railway transport are defined. Expressions for calculatio
Externí odkaz:
https://doaj.org/article/ca27766647304a779f163de9f1d1cc34
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 1, Pp 91-95 (2016)
The features of the process of longitudinal rolling bands of variable thickness with increasing compression are considered. The graphs of changes of instant advance when rolling with increasing compression are given. Compression modes bands of variab
Externí odkaz:
https://doaj.org/article/8f233bf754bf4273a43e66d09eff5fe5
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 3, Pp 93-96 (2015)
Describes the features of the design of technological equipment for plastic forming wide flanges in pipe blanks and accessories for the implementation of the technological process. Shows the dependence for determining deforming efforts. Scheme of the
Externí odkaz:
https://doaj.org/article/240e016b56e3403f9b8d1f8fea284de5
EXPERIMENTAL INVESTIGATIONS OF THE PROCESS OF ROLLING STRIPS OF VARIABLE THICKNESS WITH A LOCAL BEND
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 1, Pp 123-128 (2015)
The results of computer simulation and experimental investigations of the rolling process of strip blanks on the profiled mandrel using two processing schemes
Externí odkaz:
https://doaj.org/article/a59d20659e264982b9f572bea140270a