Zobrazeno 1 - 6
of 6
pro vyhledávání: '"Kyung Shik Yang"'
Publikováno v:
Applied Catalysis B: Environmental. 91:210-216
Nano-sized Fe3O4 particles that were covered with a porous layer of nano-sized TiO2 (TiO2-masked Fe3O4) were prepared by simply controlling pH of aqueous slurry solution containing the two particles that have different values of isoelectric point (IE
Publikováno v:
Electrochimica Acta. 52:6304-6309
Ti-mesh electrodes coated with Ti were obtained by using an electrophoretic deposition (EPD) method. The Ti coating was porous and showed a good adherence to the Ti-mesh surface, due to sintering of Ti particles during thermal treatment at 900 °C. T
Publikováno v:
Korean Journal of Chemical Engineering. 23:888-895
Both flat and corrugated wire mesh sheets were coated with aluminum powder by using electrophoretic deposition (EPD) method. Controlled thermal sintering of coated samples yielded uniform porous aluminum layer with a thickness of 100 μm that was att
Publikováno v:
Applied Catalysis A: General. 313:86-93
Wire-mesh sheets coated with Ti particles were developed by using an electrophoretic deposition (EPD) method. They were thermally treated at various working conditions for enhancing the coating strength. The Ti layer was suitably porous and showed a
Publikováno v:
Catalysis Today. 97:159-165
Wire-mesh honeycomb (WMH) catalyst is a monolith made from layers of flat and corrugated wire-meshes. To obtain an attrition-resistant washcoat on mesh surface, the mesh substrate was pre-coated with aluminum powder by electrophoretic deposition. A w
Publikováno v:
Surface and Coatings Technology. 168:103-110
Wire meshes coated with aluminum powder were developed using an electrophoretic deposition (EPD) method. A porous aluminum layer with a thickness of 100–120 μm can be attached on the wire surface after EPD and thermal treatment. Then additional ca