Zobrazeno 1 - 10
of 36
pro vyhledávání: '"Krzysztof Rozniatowski"'
Autor:
Rafał Nowaczyński, Piotr Paszke, Andrea Csaki, Jarosław Mazuryk, Krzysztof Rożniatowski, Piotr Piotrowski, Dorota Anna Pawlak
Publikováno v:
ACS Omega, Vol 8, Iss 50, Pp 48159-48165 (2023)
Externí odkaz:
https://doaj.org/article/d9cf91d582524b7bb5615365a2a5194a
Autor:
Tomasz BOROWSKI, Maciej OSSOWSKI, Piotr KOWALCZYK, Maciej DUBEK, Agnieszka BROJANOWSKA, Krzysztof ROŻNIATOWSKI
Publikováno v:
Medžiagotyra, Vol 22, Iss 3, Pp 323-329 (2016)
In most cases, machine components, which come in contact with each other, are made of steel. Common steel types include 100Cr6 and X105CrMo17 are widely used in rolling bearings, which are subjected to high static loads. However, more and more sophis
Externí odkaz:
https://doaj.org/article/23e9dbb680fb4a3781935a5d8a9b8c37
Publikováno v:
Adsorption Science & Technology, Vol 25 (2007)
Carbon deposits obtained by the pyrolysis of cyclohexene and of glucose in the pores of porous monoliths of alumina and Y-modified zirconia consist of randomly distributed insulated islands. This explains their relatively low electric conductance. A
Externí odkaz:
https://doaj.org/article/413147ca44f74422bca38799ef60269f
Autor:
Paweł Marchlewski, Michał Tacikowski, Marcin Pisarek, Rafal Jakiela, Krzysztof Rozniatowski, Tadeusz Wierzchoń, Janusz Kamiński
Publikováno v:
Materials
Materials, Vol 14, Iss 5903, p 5903 (2021)
Volume 14
Issue 19
Materials, Vol 14, Iss 5903, p 5903 (2021)
Volume 14
Issue 19
Coating magnesium alloys with nitride surface layers is a prospective way of improving their intrinsically poor surface properties
in particular, their tribological and corrosion resistance. These layers are usually produced using PVD methods us
in particular, their tribological and corrosion resistance. These layers are usually produced using PVD methods us
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::5d2356a7aa296fddc7569821184f63cb
http://europepmc.org/articles/PMC8510254
http://europepmc.org/articles/PMC8510254
Autor:
L. Kaczmarek, Tomasz Wejrzanowski, T. Plocinski, Krzysztof Rozniatowski, J. Rebis, Jakub Skibinski
Publikováno v:
Journal of Microscopy. 269:179-186
Summary Imaging of the surface of materials by atomic force microscopy under tapping and phase imaging mode, with use of modified probes is addressed. In this study, the circularly shaped holes located in varying distance from the probe base, were cu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4ffe9baa15e3504a21ca2ca5e9473a83
https://doi.org/10.1111/jmi.12613
https://doi.org/10.1111/jmi.12613
Autor:
Ryszard Diduszko, Katarzyna Kolodziejak, Jaroslaw Sar, Dorota A. Pawlak, Krzysztof Rozniatowski, Marcin Gajc
Publikováno v:
Journal of Alloys and Compounds. 659:152-158
A microstructured manganese titanate – titanium dioxide, MnTiO 3 –TiO 2 , hybrid eutectic has been grown by the micro-pulling-down method from a TiO 2 57 mol.% – MnO 43 mol.% composition. X-ray powder diffraction verifies that two phases have b
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::73446f9cdc3ff44dd84c28a21965f4df
https://doi.org/10.1016/j.jallcom.2015.11.010
https://doi.org/10.1016/j.jallcom.2015.11.010
Autor:
Michał Tarnowski, Tomasz Borowski, Krzysztof Rozniatowski, Krzysztof Kulikowski, Maciej Spychalski, Bogusława Adamczyk-Cieślak
Publikováno v:
Surface and Coatings Technology. 392:125705
Improvement of the tribological properties of steels can be achieved by increasing the hardness of the surface and by reducing roughness and the coefficient of friction. The formation of composite layers on steel, consisting of a hard nitrided or nit
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::251bce8e0642ab5fce9d9732df6fb862
https://doi.org/10.1016/j.surfcoat.2020.125705
https://doi.org/10.1016/j.surfcoat.2020.125705
Autor:
Joanna Idaszek, Wojciech Święszkowski, Marcin Pisarek, Joanna Zdunek, Krzysztof Rozniatowski, Bartłomiej Wysocki, Akiko Yamamoto
Publikováno v:
International Journal of Molecular Sciences
Volume 19
Issue 6
International Journal of Molecular Sciences, Vol 19, Iss 6, p 1619 (2018)
Volume 19
Issue 6
International Journal of Molecular Sciences, Vol 19, Iss 6, p 1619 (2018)
The use of laser 3D printers is very perspective in the fabrication of solid and porous implants made of various polymers, metals, and its alloys. The Selective Laser Melting (SLM) process, in which consolidated powders are fully melted on each layer
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e6bb35b1bbe17edab5565951ad09f344
http://europepmc.org/articles/PMC6032320
http://europepmc.org/articles/PMC6032320
Autor:
J. Rebis, K. Pressard, Tomasz Wejrzanowski, Krzysztof J. Kurzydłowski, Jakub Skibinski, Krzysztof Rozniatowski
Publikováno v:
Micron. 66:23-30
This study concerns imaging of the structure of materials using AFM tapping (TM) and phase imaging (PI) mode, using probes modified with focused ion beam (FIB). Three kinds of modifications were applied – thinning of the cantilever, sharpening of t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::0fa743adeaad0e5b0b16b088f288d5e6
https://doi.org/10.1016/j.micron.2014.05.001
https://doi.org/10.1016/j.micron.2014.05.001
Autor:
Dorota Jackiewicz, Krzysztof Rozniatowski, Roman Szewczyk, Maciej Kachniarz, Jacek Salach, Adam Bieńkowski, J. Dworecka, Wojciech Winiarski
Publikováno v:
Acta Physica Polonica A. 127:614-616
In the paper the results of investigation on tensile stresses dependence of magnetoelastic characteristics of cores made of 13CrMo4-5 constructional steel are presented. In the investigation step-cooling treated samples were used. The step-cooling pr
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::38b43e02aee065d7ca120788bacc9402
https://doi.org/10.12693/aphyspola.127.614
https://doi.org/10.12693/aphyspola.127.614