Zobrazeno 1 - 9
of 9
pro vyhledávání: '"Ki-Chang Bae"'
Autor:
Young Keun Park, Kyeongsik Ha, Ki Chang Bae, Kwang Yong Shin, Ki Yong Lee, Do-sik Shim, Wookjin Lee
Publikováno v:
Journal of Materials Research and Technology, Vol 19, Iss , Pp 3484-3497 (2022)
This study investigates the wear resistance of an Fe–12Mn–5Cr–1Ni-0.4C (high-manganese steel) produced by direct energy deposition (DED) and spheroidal graphite cast iron. The high-manganese steel was deposited on the spheroidal graphite cast i
Externí odkaz:
https://doaj.org/article/777258d50aed412092dd468d5232ca55
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 108:2385-2396
The aim of this study is to explore the wear performance of AISI 316L stainless steel fabricated via selective laser melting along different directions with respect to the building direction and via post annealing. The wear behavior of the alloy unde
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::782b41c2a8f50f02010c6a39d170e38b
https://doi.org/10.1007/s00170-020-05572-8
https://doi.org/10.1007/s00170-020-05572-8
Publikováno v:
Tribology Letters. 68
This study aims at exploring the wear performance of AISI 316L stainless steel fabricated via selective laser melting along different directions with respect to the building direction and via post annealing. Here, the wear resistance of the material
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3f6dccf75796d5ed67e7889e88de03f5
https://doi.org/10.1007/s11249-020-01316-7
https://doi.org/10.1007/s11249-020-01316-7
Publikováno v:
Metals and Materials International. 24:576-585
This study examined the effects of heat treatment on the microstructure and wear properties of Al–Zn–Mg–Cu/in-situ Al–9Si–SiCp/pure Al composites. Pure Al powder was used to increase densification but it resulted in heterogeneous precipitat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::98861fa8525499c9a4e2f8066b29f4b2
https://doi.org/10.1007/s12540-018-0035-5
https://doi.org/10.1007/s12540-018-0035-5
Publikováno v:
Archives of Metallurgy & Materials. Jun2017, Vol. 62 Issue 2, p1099-1104. 6p.
Autor:
Yong Ho Park, Ki Chang Bae, Jeong-Jung Oak, Wookjin Lee, Yonghwan Kim, Heesoo Lee, Do Hyung Kim
Publikováno v:
Wear. :203962
The aim of this study is to study the wear performance of maraging 18Ni-300 steel, fabricated via selective laser melting, with respect to the building direction. The wear resistance of the alloy was investigated with various sliding velocities, incl
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cdf3f49fd843325b301eb05f20640ec1
https://doi.org/10.1016/j.wear.2021.203962
https://doi.org/10.1016/j.wear.2021.203962
Publikováno v:
Archives of Metallurgy and Materials, Vol 62, Iss 2, Pp 1105-1108 (2017)
To investigate the effect of Fe content on the correlation between the microstructure and mechanical properties in near-b titanium alloys, the Ti-5Al-5Mo-5V-1Cr-xFe alloy system has been characterized in this study. As the Fe content increased, the n
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::3ee48a061e1fc21e7f542c03e7ac778b
https://doi.org/10.1515/amm-2017-0160
https://doi.org/10.1515/amm-2017-0160
Publikováno v:
Archives of Metallurgy and Materials, Vol 62, Iss 2, Pp 1081-1087 (2017)
The newly designed Ti-based bulk metallic glass (BMG) in which case of fracture behavior was observed 1990MPa to compressive strength with a wide plastic deformation around 7% after process of elastic deformation. This phenomenon can be compared with
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6d777ed36a90b99806e3ae0df119b427
https://doi.org/10.1515/amm-2017-0158
https://doi.org/10.1515/amm-2017-0158
Publikováno v:
Science of Advanced Materials. 7:80-84
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::69f64f5e991f3246e1e1d38d0273a15d
https://doi.org/10.1166/sam.2015.2083
https://doi.org/10.1166/sam.2015.2083