Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Khalid Alblalaihid"'
Autor:
Venkatesh Chenrayan, Chandru Manivannan, Kiran Shahapurkar, Girmachew Ashegiri Zewdu, N. Maniselvam, Ibrahim M. Alarifi, Khalid Alblalaihid, Vineet Tirth, Ali Algahtani
Publikováno v:
Journal of Materials Research and Technology, Vol 19, Iss , Pp 1148-1161 (2022)
Fiber reinforced polymer (FRP) composite materials have huge demand in various fields due to their low weight and better mechanical qualities. Machining of FRP composite materials without damage is quite difficult using traditional machining systems
Externí odkaz:
https://doaj.org/article/ac84f1398d7a4c1782ace18577c6fa0e
Autor:
Khalid Alblalaihid, Saleh A. Alghamdi, Anas Alburayt, Saif H. Almutairi, Ahmed Alwahid, Meshal Abuobaid, Sabri Alkhibari, Khaled S. Almutairi, Ibrahim M. Alarifi
Publikováno v:
Sensors, Vol 22, Iss 8, p 2966 (2022)
Combining two types of reinforcement fiber in a common matrix may lead to different failure modes such as micro-cracks between the layers when the structure is subjected to lower stress levels. Real-time damage detection should be integrated into the
Externí odkaz:
https://doaj.org/article/644b3ca60d504578854ec79201a540a6
Autor:
Khalid Alblalaihid, Kiran Shahapurkar, Venkatesh Chennarayan, Hailu Beyecha, Vineet Tirth, Ali Algahtani, Manzoore Elahi M Soudagar, Vinayak Talugeri
Publikováno v:
Materials Research Express, Vol 9, Iss 3, p 035503 (2022)
Flexural response of crump rubber filled epoxy composites is reported in the present work. Composites are fabricated using open mold casting technique and test specimens are evaluated at normal strain rate. Stress strain profiles of all the specimens
Externí odkaz:
https://doaj.org/article/98073a5c16944add9567c7de19ff67a1
Publikováno v:
Sensors, Vol 16, Iss 4, p 492 (2016)
When designing micro-scale tactile probes, a design trade-off must be made between the stiffness and flexibility of the probing element. The probe must be flexible enough to ensure sensitive parts are not damaged during contact, but it must be stiff
Externí odkaz:
https://doaj.org/article/dce9ddf566e24a59886f5bab7c88f909
Autor:
Khalid Alblalaihid, Saleh A. Alghamdi, Anas Alburayt, Ahmed Alwahid, Meshal Abuobaid, Abdullatif Alshaikh, Sabri Alkhibari, Ibrahim M. Alarifi
Publikováno v:
Key Engineering Materials. 922:87-93
Hybrid composite material has been widely used in many engineering applications (e.g., for automobiles)and has several advantages over conventional fibre-reinforced composite materials, such as high strength-to-weight ratio and low cost. However, com
Autor:
Kiran Shahapurkar, Khalid Alblalaihid, Venkatesh Chenrayan, Abdulaziz H. Alghtani, Vineet Tirth, Ali Algahtani, Ibrahim M. Alarifi, M. C. Kiran
Publikováno v:
Processes; Volume 10; Issue 5; Pages: 956
Waste tires have emerged as a severe environmental threat worldwide as they create a number of disposal and landfill burden issues. In the present study, environmental pollutant crump rubber derived from waste discarded tires was reinforced with epox
Publikováno v:
Precision Engineering. 43:262-269
Micro-scale probing systems are used on specialist micro-coordinate measuring machines to measure small, intricate and fragile components. Probe stiffness is a critical property of micro-scale probing systems; it influences contact force, robustness,
Publikováno v:
Sensors and Actuators A: Physical. 232:368-375
In tactile micro coordinate metrology, miniature probing systems are required to allow geometric measurements of miniature, delicate, high precision components. These probing systems typically comprise of a small stylus of only a few mm in length, wi
Publikováno v:
Procedia Engineering. 87:1164-1167
In micro tactile probing a design trade off must be made between stiff and robust probes. Stiff probes are capable of overcoming surface attraction forces, while delicate flexible probes are capable of making contact with a sensitive part without cau
Publikováno v:
Journal of Micromechanics and Microengineering. 27:089501